DC 12V XH-M452 Temperature And Humidity Controller Module Digital Display High Accuracy Dual Output
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Parameter
Model:XH-M452
Voltage:DC 12V
Temperature range:-20°C to 60°C
Temperature range:0% to 100%RH
Control accuracy:0.1°C, 0.1RH
Detector probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Weight:about 69g (with sensor)
Size:65*55*28mm (length*width*height)
Temperature control
1. Set the temperature +:Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / – key setting values, wrong operation after 5 seconds, automatically return to detect temperature display
2. Set the temperature -:Normal display mode, long press – button for 3 seconds, stop numerical flashing temperature, press the + / – key set value
3. Restore the factory Settings:At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / – key
set Stop temperature:long press – button, stop flashing temperature, set stop temperature by + / – key
Humidity Settings
Set to start humidity:long press the + key, start the humidity value flashing, set by + / – key launch humidity value
Set stop humidity:long press – to stop humidity value, set by + / – key to stop the humidity value
Fault code:display LLL mean the sensor fault
display HHH mean Test temperature exceed the range of measurement
How to control the humidity
Humidification / dehumidification mode setting method
1. Set [start humidity]:press and hold the “+ Inch key to start the humidity value flashing, and set the start humidity value with +/- key.
2. Set [stop Humidity]:press and hold the inch-inch key to stop the humidity value from flashing. Use the +/- keys to set the stop humidity value.
How to control the temperature
1. Set start temperature +
under the normal display state, long press the inch+inch button for 3 seconds, the start temperature value flashes, press +/- key to set the value, after 5 seconds without operation, automatically return to the detection temperature display.
2. Set the stop temperature
under the normal display state, long press the inch-inch button for 3 seconds to stop the flashing of the temperature value. Press the +/- button to set the value.
3. Restore factory settings
at the same time long press the temperature key and humidity inch+inch button for 3 seconds, digital display 888888
4. Heating / cooling mode setting method
4.1 Setting method:start temperature
4.2 Setting method:start temperature > stop temperature (program automatically determines the operating mode as cooling mode)
4.3 Setting method
set [start temperature]:long press the inch+inch button to start the temperature flashing and set the start temperature value via the +/- keys;
set [stop temperature]:long press the inch+inch button to stop the temperature flashing and set the stop temperature value via the +/- keys
Note
When setting the mode, if you accidentally set the set temperature value upside down, the output indicator will not light, the load does not work, if the above conditions appear after the setting, you can check whether the set temperature value is reversed.
Package included
1 X XH-M452 temperature and humidity controller module
1 X Sensing line
Weight | 0.074 kg |
---|
Customers Also Viewed
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubator
$56.69Switch AccessoriesAdd to cartFeatures– Made of high quality ABS material, insulating, stable and durable.– LED lamp head, high power, strong light source, can clearly detect the hatching of eggs.– Using high-quality materials, safe and durable, with buttons that are easy to open and close.– Suitable for hatching eggs, but also for children and students to learn the process …
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubatorRead More
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
3.7V Lithium Battery 4 Paragraph Power indicator Module
$4.36Test & Measuring ModuleAdd to cartDescription1, onboard high precision voltage detection chip and power supply voltage chip2, onboard four power indicator LED lights, three kinds of color display, red, yellow, yellow, green,representing 20%, 50%, 80%, 100% of the battery3, set aside a battery testing interface and two positioning hole4, PCB size:22.2 (mm) x17.2 (mm)Package included1 x 3.7V Lithium Battery 4 …
3.7V Lithium Battery 4 Paragraph Power indicator ModuleRead More
YAHBOOM High-quality T-shape Expansion Board + 40Pin GPIO Flat Rainbow Ribbon Cable for Raspberry 4B/3B+/ZERO/W
$10.21Raspberry Pi & Orange PiAdd to cartDescriptionThis high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.FeaturesSpecifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry Pi …
10pcs LM3915 10-segment Audio Level indicator Kit Electronic Soldering Training experiment DIY Parts
$33.89DIY Electronic KitsAdd to cartFeatrurePower supply:DC9-12VPCB size:62*27mm1 audio cable is needed. One end is subtracted and connected to the audio input port. The red cable is connected to AUDIO +, the green cable is connected to ADUIO-, and the blue cable is subtracted, do not need to solder.Package included10 x LM3915 10-segment Audio Level Indicator Kit
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$55.12Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.