DC 12V XH-M452 Temperature And Humidity Controller Module Digital Display High Accuracy Dual Output
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Parameter
Model:XH-M452
Voltage:DC 12V
Temperature range:-20°C to 60°C
Temperature range:0% to 100%RH
Control accuracy:0.1°C, 0.1RH
Detector probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Weight:about 69g (with sensor)
Size:65*55*28mm (length*width*height)
Temperature control
1. Set the temperature +:Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / – key setting values, wrong operation after 5 seconds, automatically return to detect temperature display
2. Set the temperature -:Normal display mode, long press – button for 3 seconds, stop numerical flashing temperature, press the + / – key set value
3. Restore the factory Settings:At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / – key
set Stop temperature:long press – button, stop flashing temperature, set stop temperature by + / – key
Humidity Settings
Set to start humidity:long press the + key, start the humidity value flashing, set by + / – key launch humidity value
Set stop humidity:long press – to stop humidity value, set by + / – key to stop the humidity value
Fault code:display LLL mean the sensor fault
display HHH mean Test temperature exceed the range of measurement
How to control the humidity
Humidification / dehumidification mode setting method
1. Set [start humidity]:press and hold the “+ Inch key to start the humidity value flashing, and set the start humidity value with +/- key.
2. Set [stop Humidity]:press and hold the inch-inch key to stop the humidity value from flashing. Use the +/- keys to set the stop humidity value.
How to control the temperature
1. Set start temperature +
under the normal display state, long press the inch+inch button for 3 seconds, the start temperature value flashes, press +/- key to set the value, after 5 seconds without operation, automatically return to the detection temperature display.
2. Set the stop temperature
under the normal display state, long press the inch-inch button for 3 seconds to stop the flashing of the temperature value. Press the +/- button to set the value.
3. Restore factory settings
at the same time long press the temperature key and humidity inch+inch button for 3 seconds, digital display 888888
4. Heating / cooling mode setting method
4.1 Setting method:start temperature
4.2 Setting method:start temperature > stop temperature (program automatically determines the operating mode as cooling mode)
4.3 Setting method
set [start temperature]:long press the inch+inch button to start the temperature flashing and set the start temperature value via the +/- keys;
set [stop temperature]:long press the inch+inch button to stop the temperature flashing and set the stop temperature value via the +/- keys
Note
When setting the mode, if you accidentally set the set temperature value upside down, the output indicator will not light, the load does not work, if the above conditions appear after the setting, you can check whether the set temperature value is reversed.
Package included
1 X XH-M452 temperature and humidity controller module
1 X Sensing line
Weight | 0.074 kg |
---|
Customers Also Viewed
Pellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BBQ
$32.39Solar CollectorsAdd to cartDescriptionPellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BbqSpecificationsColor:BlackSize:142*57*100cm / 56inchL x22.5inchD x39inchH Features:Waterproof, Tear Resistant, Heavy DutyFeatures— Constructed from 600 Denier polyester oxford fabric with water resistant PVC coating,this heavy duty grill cover and tough fabric provides a powerful protection against any weather:snow,hail,rain and wind etc,and gives your grill all year round …
Pellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BBQRead More
52Pi Acrylic Plastic Black Case with 3030 Cooling Fan for Rasberry Pi 4B
$16.07Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionCompatible with the Newest Raspberry Pi 4 Model B.Protective case is easy to assemble.Material:Top & Bottom are clear acrylic layers; the Middle is ABS plastic layers.Access to all Pi Ports:Power, Video/Audio, USB, …
52Pi Acrylic Plastic Black Case with 3030 Cooling Fan for Rasberry Pi 4BRead More
DC 12V 2 Channel RS232 Relay Module Board Remote Control USB PC UART COM Serial Ports for Smart Home
$14.20Relay ModuleAdd to cart>>>Manual:Click here to openFeaturesChannel:2-channel relay;there are 2 expansion IN ports, low level output Interface:DB9 female RS232 level,can control relay on/off/self-lock/inching by computer terminalOperating Voltage:DC 12V (range:8.5-13.5V)Control Voltage:DC 9V 12V or DC 8.5-13.5V/AC 85-265VControl Current:10APackage Included1 x 2 Channel RS232 Relay
5pcs Green Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:GreenStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
Reviews
There are no reviews yet.