DC 12V XH-M452 Temperature And Humidity Controller Module Digital Display High Accuracy Dual Output
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Parameter
Model:XH-M452
Voltage:DC 12V
Temperature range:-20°C to 60°C
Temperature range:0% to 100%RH
Control accuracy:0.1°C, 0.1RH
Detector probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Weight:about 69g (with sensor)
Size:65*55*28mm (length*width*height)
Temperature control
1. Set the temperature +:Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / – key setting values, wrong operation after 5 seconds, automatically return to detect temperature display
2. Set the temperature -:Normal display mode, long press – button for 3 seconds, stop numerical flashing temperature, press the + / – key set value
3. Restore the factory Settings:At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / – key
set Stop temperature:long press – button, stop flashing temperature, set stop temperature by + / – key
Humidity Settings
Set to start humidity:long press the + key, start the humidity value flashing, set by + / – key launch humidity value
Set stop humidity:long press – to stop humidity value, set by + / – key to stop the humidity value
Fault code:display LLL mean the sensor fault
display HHH mean Test temperature exceed the range of measurement
How to control the humidity
Humidification / dehumidification mode setting method
1. Set [start humidity]:press and hold the “+ Inch key to start the humidity value flashing, and set the start humidity value with +/- key.
2. Set [stop Humidity]:press and hold the inch-inch key to stop the humidity value from flashing. Use the +/- keys to set the stop humidity value.
How to control the temperature
1. Set start temperature +
under the normal display state, long press the inch+inch button for 3 seconds, the start temperature value flashes, press +/- key to set the value, after 5 seconds without operation, automatically return to the detection temperature display.
2. Set the stop temperature
under the normal display state, long press the inch-inch button for 3 seconds to stop the flashing of the temperature value. Press the +/- button to set the value.
3. Restore factory settings
at the same time long press the temperature key and humidity inch+inch button for 3 seconds, digital display 888888
4. Heating / cooling mode setting method
4.1 Setting method:start temperature
4.2 Setting method:start temperature > stop temperature (program automatically determines the operating mode as cooling mode)
4.3 Setting method
set [start temperature]:long press the inch+inch button to start the temperature flashing and set the start temperature value via the +/- keys;
set [stop temperature]:long press the inch+inch button to stop the temperature flashing and set the stop temperature value via the +/- keys
Note
When setting the mode, if you accidentally set the set temperature value upside down, the output indicator will not light, the load does not work, if the above conditions appear after the setting, you can check whether the set temperature value is reversed.
Package included
1 X XH-M452 temperature and humidity controller module
1 X Sensing line
Weight | 0.074 kg |
---|
Customers Also Viewed
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home Smart
$8.73Relay ModuleAdd to cartManual:http://myosuploads3.hobbyant.com/products/20190219/20190219034014C255V9V12V.pdfApplicationsThis module is a switch instant turn-on trigger delay module, which can be applied to home intelligent systems, anti-theft alarm delay, door control system, automation equipment control, PLC industrial control, electronic development and so on.Description1. Using advanced high-quality timing chip control, accurate timing, performance is much better than 555 chip;2. The trigger terminal has optocoupler …
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home SmartRead More
2.5W Mini Laser Engraving Machine 2-axis Engraving Machine for Wood Plastic Paper Bamboo Horns Leather Sponge Paper
$503.82Laser Engraving MachineAdd to cartProduct instruction and installation please:https://drive.google.com/openid=1MH931sFiPqf-L45WqXmfEAN4TrrFrlu-SpecificationsName:2-axis Engraving MachineModel:969407Size:600*550*150mm/24*22*6inStroke:380*260mm/15*10inCommunication Interface:miniUSBLaser Power:2500mwStepper Motor:42H34SVoltage:AC110-220V to DC12VControl Board Selection:DVP SE 2-axis engraving machine control boardSoftware Support:wifidevelo, Candle, Benbox, GrblController, LiteFire, etc. All GRBL-enabled softwareFeatures-The new custom V-slot aluminum matching rolling bearing X24, the accuracy is better and more stable.-There is no limit to the size and height of the engraving …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage Meter
$20.60Test & Measuring ModuleAdd to cartFeature1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected.2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage MeterRead More
6W 6V 260x140x2.5mm S0506 Portable Semi-flexible Solar Panel with Back Junction Box Single USB Charger + 4xSucker + 2x Carabiner Kit
$32.26Smart Robot & Solar PanelAdd to cartFeatures– Portable and frame design– Standard USB output– thin design make it very easy to carry.– Monocrystalline silicon solar cells and epoxy resin surface seal.– Comes with four suckersSpecifications– Size:Approx. 26x14x0.3cm/ 10.24×5.51×0.12inch-Actual Power:6W– Solar output:6V 1700mA– Voltage regulator tube output:5V 1200mA– USB regulated output:5V 1200mAh– Output:USB 5V ,1200mAh– Charge time:3-5h– Solar open circuit voltage:6.8V (max)– …
DC 7V-24V Audio input Switch Board 4-way Audio Source Switch Board Audio Signal input Switch Board Switch Relay DIY Kit
$18.83DIY Electronic KitsAdd to cartSpecificationName:Audio signal switcherVoltage:DC 7V-24V, AC 6V-18VFunction:Four groups of audio signals are connected at the same time, and one group of signals is outputMethod:Rotary switching, switching once when rotating.Relay switching, zero loss.Application:computer, TV, mobile phone, home theater.Package included1set of Audio signal switcher
22.5V 1.25A 33W AC Power Adapter Charger for iRobot
$66.81AC/DC AdaptersAdd to cartSpecificationsName:AC Power Adapter ChargerInput:AC 100-240V 1.5A 50/60HzOutput:DC 22.5V 1.25A 33WInterface:5.5mm*2.5mmSafe:CE,RohsColor:BlackMaterial:PCSize ①Length:11.3cm ②Width:4.5cm ③Height:3.1cm ④Total Length:120cm (including wire)Fit for iRobot 400 500 600 700 770Features1.With heat dissipation intelligent chip and environmentally friendly material.2.Avoid power leakage and fire prevention.3.Strong and durable,long serve life.4.The tool is simple & easy to use.5.Small and beautifully designed and strong practicability.6.High performance …
22.5V 1.25A 33W AC Power Adapter Charger for iRobotRead More
Desktop Game Fun Game Penguin Ice Breaking Save the Penguin Great Family Education Toys
$28.42MathematicsAdd to cartFeatureThe One Who Make The Penguin Fall OffThe Will Lose This GameDon’t Fall Into The Trap Of The Opponent!See Who Can Get The Final Victory!SpecificationColor:As pictureSize:About 23*23*6CMMaterial:Environmentally Materials,ABS PlasticPackage Include1Set x Penguin Ice BreakingPlease NoteThe Picture is only for reference, please make the object as the standard.
Reviews
There are no reviews yet.