12CH Channel DC12V/24V/AC220V Electric Wireless Remote Control Switch industrial Personal Computer
$110.48
frequency 433 MHz Voltage AC220V / frequency 315MHz Voltage 24V / frequency 315MHz Voltage AC220V / frequency 433 MHz Voltage 12V / frequency 433 MHz Voltage 24V / frequency 315MHz Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Overview
The wireless receiver controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to adopt traditional jumper or dial-code switch encoding. It only needs to receive and store the wireless signals transmitted by the remote control to realize the supporting use. If the learned remote control is lost in the process of use, the information stored in the receiving controller should be cleaned up. The lost remote control will not be able to remote control the receiving controller. In order to regain the right of use, the user must learn again before using it.
It is mainly used in the fields of electric door, window, lifting equipment, gate, elevator, industrial control and security.
Way of working
DC-12L has five working modes:signal self-locking, signal interlocking, signal non-locking, signal self-locking and non-locking coexistence.
1. Signal self-locking — press the remote control number 1 button
2. Signal is not locked — press the remote control number 2 button
3. Signal interlock – press the remote control button 3
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence – press remote control 4 key
5. Signal 1st self-locking and 2~12 way non-locking coexisting – press remote control 5 key
Output method
1. Signal self-locking:press the remote control button 1
Press the remote control No. 1 button, the relay corresponding to the No. 1 button is pulled in and held, and then press the No. 1 button again, the No. 1 relay is disconnected; Press the No. 2 button of the remote control, the No. 2 button corresponds to the relay is pulled in and hold, and then press No. 2 key again, the 2nd relay is disconnected; the 3~12 key works according to this cycle.
2. Signal is not locked:press the remote control button 2
Press and hold the remote control No. 1 button, and the relay corresponding to the No. 1 button is pulled in. After the hand is released, the relay is disconnected. Press the No. 2 button, and the relay corresponding to the No. 2 button is pulled in, and disconnected after being released; 3~12 button Work as usual.
3. Signal interlock:press the remote control button 3
Press the remote control No. 1 button, the corresponding No. 1 relay is pull in and held, press the No. 2 button, the No. 1 relay is disconnected, and the relay corresponding to the No. 2 button is pulled in and held; the 3~12 button works according to this cycle.
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence:press remote control button 4
Among the 12 relays corresponding to the remote control, 1 to 6 are self-locking functions, and 7 to 12 are non-locking functions.
5. The signal 1st self-locking and 2~12 way non-locking coexistence:press the remote control button 5
Among the 12 relays corresponding to the remote control, the first one is a self-locking function, and the 2~12 are the non-locking function.
Note:If the learned receiver need to change to other functions, please clear the receiver and select the required button to re-code the code.
Learn method
When the receiver is powered on, press the learning button on the receiver to light up and release, enter the learning state; according to the function you need to select a key to learn by the remote control, the receiver flashes one time (the buzzer sounds once) means that the study is successful.
Clear method
When the receiver is powered on, press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out (the buzzer sounds for about 3 seconds), indicating that the code has been successfully cleared. This receiver can store about 30 different remote control codes.
Technical parameter
Working voltage:DC12V/DC24V/AC220V (Optional)
Quiescent current:≤7mA
Working temperature:-20 ° C – +70 ° C
Receive sensitivity:≥-107dBm
Operating frequency:315MHz to 433MHz
Control voltage:AC, DC optional
Output current:≤5A
Board size:120mmx73mmx18mm
Shell size:125mmx78mmx30mm
Industrial 12-key remote control parameters
Working voltage:DC6V (4 batteries on the 5th, the battery is not included)
Quiescent current:0mA
Working frequency:315MHZ/433MHZ (Optional)
Chip Type:Fixed Code (2264)
Oscillation resistance:Default 475
Launch distance:200-500M (open environment)
Modulation method:ASK amplitude modulation
Size:70 x 158 x 38mm
Package includes
1 x Receiver
1 x Remote control
Weight | 0.1 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.