12CH Channel DC12V/24V/AC220V Electric Wireless Remote Control Switch industrial Personal Computer
$110.48
frequency 433 MHz Voltage AC220V / frequency 315MHz Voltage 24V / frequency 315MHz Voltage AC220V / frequency 433 MHz Voltage 12V / frequency 433 MHz Voltage 24V / frequency 315MHz Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Overview
The wireless receiver controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to adopt traditional jumper or dial-code switch encoding. It only needs to receive and store the wireless signals transmitted by the remote control to realize the supporting use. If the learned remote control is lost in the process of use, the information stored in the receiving controller should be cleaned up. The lost remote control will not be able to remote control the receiving controller. In order to regain the right of use, the user must learn again before using it.
It is mainly used in the fields of electric door, window, lifting equipment, gate, elevator, industrial control and security.
Way of working
DC-12L has five working modes:signal self-locking, signal interlocking, signal non-locking, signal self-locking and non-locking coexistence.
1. Signal self-locking — press the remote control number 1 button
2. Signal is not locked — press the remote control number 2 button
3. Signal interlock – press the remote control button 3
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence – press remote control 4 key
5. Signal 1st self-locking and 2~12 way non-locking coexisting – press remote control 5 key
Output method
1. Signal self-locking:press the remote control button 1
Press the remote control No. 1 button, the relay corresponding to the No. 1 button is pulled in and held, and then press the No. 1 button again, the No. 1 relay is disconnected; Press the No. 2 button of the remote control, the No. 2 button corresponds to the relay is pulled in and hold, and then press No. 2 key again, the 2nd relay is disconnected; the 3~12 key works according to this cycle.
2. Signal is not locked:press the remote control button 2
Press and hold the remote control No. 1 button, and the relay corresponding to the No. 1 button is pulled in. After the hand is released, the relay is disconnected. Press the No. 2 button, and the relay corresponding to the No. 2 button is pulled in, and disconnected after being released; 3~12 button Work as usual.
3. Signal interlock:press the remote control button 3
Press the remote control No. 1 button, the corresponding No. 1 relay is pull in and held, press the No. 2 button, the No. 1 relay is disconnected, and the relay corresponding to the No. 2 button is pulled in and held; the 3~12 button works according to this cycle.
4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence:press remote control button 4
Among the 12 relays corresponding to the remote control, 1 to 6 are self-locking functions, and 7 to 12 are non-locking functions.
5. The signal 1st self-locking and 2~12 way non-locking coexistence:press the remote control button 5
Among the 12 relays corresponding to the remote control, the first one is a self-locking function, and the 2~12 are the non-locking function.
Note:If the learned receiver need to change to other functions, please clear the receiver and select the required button to re-code the code.
Learn method
When the receiver is powered on, press the learning button on the receiver to light up and release, enter the learning state; according to the function you need to select a key to learn by the remote control, the receiver flashes one time (the buzzer sounds once) means that the study is successful.
Clear method
When the receiver is powered on, press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out (the buzzer sounds for about 3 seconds), indicating that the code has been successfully cleared. This receiver can store about 30 different remote control codes.
Technical parameter
Working voltage:DC12V/DC24V/AC220V (Optional)
Quiescent current:≤7mA
Working temperature:-20 ° C – +70 ° C
Receive sensitivity:≥-107dBm
Operating frequency:315MHz to 433MHz
Control voltage:AC, DC optional
Output current:≤5A
Board size:120mmx73mmx18mm
Shell size:125mmx78mmx30mm
Industrial 12-key remote control parameters
Working voltage:DC6V (4 batteries on the 5th, the battery is not included)
Quiescent current:0mA
Working frequency:315MHZ/433MHZ (Optional)
Chip Type:Fixed Code (2264)
Oscillation resistance:Default 475
Launch distance:200-500M (open environment)
Modulation method:ASK amplitude modulation
Size:70 x 158 x 38mm
Package includes
1 x Receiver
1 x Remote control
Weight | 0.1 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.