X860 M.2 NGFF 2280/2260/2242/2230 SATA SSD NAS Storage Expansion Board with USB 3.0 Jumper for Raspberry Pi

Overview
The new member of the Raspberry Pi storage expansion board family – X860 (M.2 NGFF SATA 2280/2260/2242/2230 ) is coming. 2280/2260/2242/2230
Features
– Ideal storage solution for Raspberry Pi – M.2 NGFF SATA SSD Shield
– Supports up to 2TB m.2 NGFF SSD solid-state drive
– Supports multiple M.2 NGFF SSD lengths including:2280, 2260, 2242, 2230
– Supports operating system installation and booting from your SSD
– Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
– Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
– USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
– Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
– USB bus-powered
– LED blue indicator indicates drive status
– Specially-made USB3.0 connector to connect with Raspberry Pi – no additional cables needed
– On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
– Fully compatible with X720, X730 and X735 for intelligent and safe power management
– PCB Size:87mm x 56mm
Note
– *The Raspberry Pi main board is not included.
– USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
– NGFF SATA SSD is not included
– Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
– As with all SSDs, new media must be formatted before use
– Performance depends on host system, workload, and SSD media used
– SSDs use exceptionally high performance storage media that will run hot when under load
– Older SSD drives with less efficient flash media may not perform as well as newer drives
– We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;
Power supply request
5Vdc +/-5% , Powered by Raspberry Pi
Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
5Vdc via on-board micro-USB or XH2.5 2Pin connector
Ports & Connectors
– USB socket – USB 3.0 type A x 1
– Micro-USB SSD power socket x 1
– XH2.54 SSD power input port x 1
– 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1
Click for more info
Package included
1 x X860 Board
1 x USB3.0 Connector
1 x USB 3.0 A-Male to A-Male Data cable(about 60cm)
1 x Screws Pack