CC2530F256RHAR cc2530 Module Serial Port Transparent Transmission with ZB502 Development Board Kit
$52.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Note
At least two CC2530 modules are needed to realize Z1gBee networking, this product contains only one.
Two methods can be used
Application method:(The bottom layer is implemented by the board, you only do the application)
Use the firmware associated with the board. In this way, the board is a Z1gBee wireless serial port module, the operation is as simple as operating the serial port, you do not need to understand the complex Z1gBee protocol.
Development method:(Re-develop the board and implement the bottom layer yourself)
Write your own Z1gBee communication protocol. In this way, you need CC Debugger, etc., you also need to learn and understand the complex Z1gBee protocol.
Serial port related
Operation is as simple as operating the serial port
Support three kinds of serial port transparent transmission firmware:coordinator, router and terminal
The factory default configuration is a router (by downloading the coordinator or terminal firmware, it can be changed to the coordinator or terminal)
Support serial port to send big data packets and broadcast fast packet sending
Support serial port download program (firmware supports serial port bootloader; serial port module required)
Support the host computer software to set working mode, serial channel, baud rate, channel and other parameters
Other
Supports automatic networking (at least one coordinator and one router are required for networking)
Real-time monitoring of the signal strength between the coordinator, routing and terminal
With RXF2401 power amplifier
Parameter
Main control chip:CC2530F256RHAR
Communication distance:communicable:over 1500 meters; reliable communication over 1300 meters; automatic reconnection:over 1000 meters (working environment:open area)
Working frequency band:2.4GHz
Working voltage:2.0V-3.6V
Temperature range:-40→∥85→
Serial port baud rate:38400bps (default), can be set to other baud rate
Interface:All I/O interfaces except P1_1 and P1_4
Interface spacing:pin spacing:2.54mm; pin spacing on both sides 22.86mm (9×2.54)
Antenna:Use 2.4G, 2DB omnidirectional antenna
CC2530F256 Core Parameters
Working frequency band:2.4GHz
16 transmission channels, switch reliable communication channels according to the environment
Wireless transmission rate up to 250kbps
High-performance, low-power 8051 microcontroller core
RF transceiver for 2.4GHz IEEE 802.15.4
Wide power supply voltage range (2.0∥3.6V)
Watchdog, battery monitor and temperature sensor
12-bit ADC with 8 inputs
2 USARTs supporting multiple serial communication protocols, 1 infrared generating circuit
1 general purpose 16-bit and 2 8-bit timers
Advanced Encryption Standard (AES) coprocessor
21 general purpose I/O pins, 2 with 20mA current sink or current supply capability
ZB502 baseboard introduction
The onboard battery slot supports multiple power supply methods.
Lead out all IOs to facilitate user function expansion.
There is a CP2102 onboard, which is convenient for users to debug and update the program.
Onboard basic LED and buttons are convenient for users to operate.
Package includes
1 x ZB502 development board
1 x XCor 2530
1 x Antenna
1 x USB cable type A male port to mini-B male port
1 x 4PIN+2PIN cable package
Interface
1. Core board slot
2. I/O interface
3. USB interface
4. UART/SPI interface
5. 1-wire interface
6. Debug interface
7. 5V and 3.3V power input and output interface (usually used for external power supply, or common ground with user board)
Device
8. CP2102
9. AMS1117-3.3
10. Power switch
11. Serial port transceiver indicator
12. Power LED
13. User LED
14. User buttons
15. Reset button
Jumper Description
16. UART0 JMP
17. LED JMP
18. KEY JMP
Weight | 0.171 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.