2Pcs 17S 60V 45A Li-ion Lithium Battery Protection Board BMS PCB System
$74.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Note:The protective plate cannot be used in parallel.
Specifications
Continuous discharging current:45A
Instantaneous diacharge current:100A
Charging voltage:67.2V
Charging current:45A
Over-charge detect:4.28±0.05V
Protect delay:100ms
Over-charge release:4.08±0.05V
Balance
Detect voltage:4.2±0.025V
Release voltage:4.2±0.05V
Balance current:60±5mA
Over-discharge:2.55±0.08V
Over-discharge detect delay:50mS
Release voltage:2.9±0.1V
Detect voltage:150mV
Detect delay:15mS
Current detect:130±10A
Resistance:≤15mΩ
Working current:≤60uA
Sleep current (when over-discharge):≤10uA
Working temperature:-30~80→
Size:120 x 60 x 9mm
:Details:Specification:Unit:Remark
Charge:Charging voltage:71.4:V
Recharging current:45 (max):A
Discharge:Continuous discharge current:45 (max):A
Instantaneous discharge current:150 (max):A
Overcharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single core
Overcharge protection delay:100:mS
Overcharge release voltage:4. 05 ±0.05:V:Single core
Battery balance:Cell balance detection voltage:4. 2 ±0.025:V
Cell balance release voltage:4.2±0.05:V
Cell balance current:42±5:mA
Over-discharge protection:Over-discharge detection voltage:2.8±0.08:V
Over-discharge detection delay:100:mS
Over-discharge release voltage:3.0±0.1:V
Over-discharge protection release condition:Load disconnect or charge activation:
Overcurrent protection:Overcurrent detection voltage:150:mV
Overcurrent detection delay:10:mS
Overcurrent protection current:180±20:A
Overcurrent protection release condition:Load disconnect or charge activation:
Short circuit protection:Short circuit protection conditions:Short circuit of external load:
Short-circuit detection delay:200:uS
Short-circuit protection release condition:Disconnect load:
Temperature protection:Temperature protection:/:°C:Need to match by yourself
Internal resistance:Main circuit conduction internal resistance
Self-consumption:Working current
Sleep current (when the current is over-discharged)
Operating temperature:Temperature range:-30~80:°C
Main function
Over charge protection, over discharge protection function, short circuit protection function, over current protection function,with band balance.
Connections
Step1:Connect charging /discharging wire, battery pack negative wire
Step2:After confirm the wires are connected OK, plug the connector cable in the BMS
DO NOT plug CONNECTOR CABLE in the BMS before connect wire!!
Attention, ESD protection during work
Package includes
2 x 60V 17S 45A Protection board
2 x Cabel wire
Weight | 0.16 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.