10pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$21.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Introduction
NF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.
NF-04 can be widely used in various Internet of Things applications, and is suitable for wireless mouse and keyboard, wireless remote control, somatosensory equipment, active RFID, NFC, low-power self-organizing network wireless sensor network nodes. Ideal solution for IoT applications
Feature
1. DIP-8 ultra small package, built-in 2.4G antenna, compact size, easy to use
2. Support data reception of six channels
3. Support normal modulation methods such as GFSK/FSK
4. Support 2Mbps/1Mbps/250Kbps data rate
5. Multi-frequency point:126 frequency points to meet the needs of multi-point communication and frequency hopping communication
6. Internally integrated high PSRR LDO
7. Wide power supply voltage range:1.9~3.6V
8. Average emission current as low as 110mA
9. Receive sensitivity:-96dBm@250kbps
10. Maximum transmit power:+7dBm
11. With four-wire SPI interface, the speed can up to 10MHz
12. Internal integrated intelligent ARQ baseband protocol engine
13. Transceiver data hardware interrupt output
14. Support 1bit RSSI output
15. Low application cost:BK2425 integrates all high-speed signal processing parts related to RF protocol, such as:automatic retransmission of lost data packets and automatic generation of response signals, etc. The BK2425 SPI interface can be connected with the hardware SPI port of the microcontroller or with a single-chip microcomputer. The I/O port is simulated, and the internal FIFO can interface with various high and low speed microprocessors, which is convenient for using low-cost single-chip microcomputers.
16. Easy to develop:Since the link layer is fully integrated on the module, it is very easy to develop. Automatic retransmission function, automatic detection and retransmission of lost data packets, retransmission time and number of retransmissions. Software control automatically stores the packet auto-answer function without receiving the response signal. After receiving valid data, the module automatically sends a response. Signal, no need to separately program carrier detection – fixed frequency detection built-in hardware CRC error detection and point-to-multipoint communication address control packet transmission error counter and carrier detection function can be used for frequency hopping setting can simultaneously set six receiving channel addresses, which can be selective The open receiving channel stamp hole has a 2.54mm pitch for easy embedded applications.
PIN:Name:Direction:Function
1:VCC:-:Power supply must be between 2.0 ~ 3.6V
2:GND:-:Ground wire, connected to the power reference ground
3:CSN:Input:Module chip select pin for starting an SPI communication
4:CE:Input:Module control pin
5:MOSI:Input:Module SPI Data Input Pin
6:SCK:Input:Module SPI bus clock
7:IRQ:Output:Module interrupt signal output, active low
8:MISO:Output:Module SPI Data Output Pin
Module model:NF-04
Package:DIP-8
Size:28.5*15.2 mm
Communication Interface:SPI (up to 10Mbps)
Air speed:250k~2Mbps 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Spectrum range:2400MHz~2525MHz adjustable, 1MHz stepping
Antenna form:Onboard PCB antenna, gain 2dBi
Maximum transmit power:7dBm
Receiving sensitivity:-96dBm@250kbps
Average current:Emission current:25mA (7dBm)
Receive current:15mA (2Mbps)
Shutdown current:1.0uA (Shutdown mode)
Power supply range:1.9~3.6V, typical value 3.3V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-20 °C ~ 90 °C,
Package includes
10 x 2.4G Wireless module
Weight | 0.05 kg |
---|
Customers Also Viewed
3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB Breadboard
$17.32Electronic Accessories & SuppliesAdd to cart3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB BreadboardDescription1 terminal Strip, tie-point 6302 Distribution Strips, tie-point 200Solderless breadboard (MB-102)Wire size:Suitabe for 29-20 AWG wiresSize:About 16.5*5.6*1 cmNote:May has different types random delivery.Package included3 x MB102 Breadboard 830 Hole Solderless PCB
Laser Ceramic Body 28mm Fiber Laser Cutting Machine Head Nozzle Holder Ceramic Ring Parts
$27.89Engraving Parts & AccessoriesAdd to cartSpecificationMaterial:CeramicDiameter:28mmHeight:12mmThe installation type:Internal thread connectionApplication:Fiber laser cutting machinePackage Included1 x Laser Ceramic
MTOLASER PCA-K Pillar Limiter Lens Frame Elevating Set Optical Adjustment Laser Module Holder
$15.27Engraving Parts & AccessoriesAdd to cartDescriptionThe PCA-K pillar limiter elevating set is designed to locate the position of the adjusting rod, which can easily realize the fine-tuning of the optical path calibration without any other optical elements.SpecificationBrand:MTOLASER Model:PCA-KMaterial:Aviation AluminumMain Color:Black + SilverInstallation Diameter:12mm ColumnSize:22mm x 12mmFeatures1. The pillar limited elevating set is designed to locate the position of the adjusting …
Metal Film Resistor Assortment kit LED Diodes Electrolytic Capacitor Ceramic Set Transistor Plastic Bag Package DIY Electronic Components Kits
$32.79Electronic Accessories & SuppliesAdd to cartLED diodes:100pcs LED Assorted KitWhite 5mm 20pcs 3V-3.2V 20mARed 5mm 20pcs 1.8V-2V 20mAGreem 5mm 20pcs 1.8V-2V 20mAYellow 5mm 20pcs 2V-2.3V 20mABlue 5mm 20pcs 3 V-3.2V 20mAWhite 3mm 20pcs 3V-3.2V 20mARed 3mm 20pcs 1.8V-2V 20mAGreem 3mm 20pcs 1.8V-2V 20mAYellow 3mm 20pcs 2V-2.3V 20mABlue 3mm 20pcs 3 V-3.2V 20mAResistance package600pcs 30 values Metal Film Resistor Kit 10R-1M …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital input
$57.38Network ModuleAdd to cartFunction descriptionControl the pull-in and release of 1 relay through the Ethernet network, with a shell. The module supports both TCP and UDP two operation modes, the instructions are simple and easy to understand, and the jog and 1-65535 seconds delay can be specified in the instruction. The module is equipped with VB, host computer …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital inputRead More
STC89C52 DIY Learning Board Kit Suit the Parts 51/AVR Microcontroller Development Board Learning Board
$13.11DIY Electronic KitsAdd to cartThis board to 51 interface designed for platform double reset circuit, the monolithic support are1, On STC series such as STC89, STC11, STC12, STC90 DIP encapsulation (40 feet). Need to download a program via a serial port (COM).2, The AT89S series such as AT89S51 and AT89S52 devices such as DIP encapsulation (40 feet). Need to …
1/2 inch Micro Water Filter Purifier Stainless Steel Front Facing Wire Mesh
$17.00Mesh & Wire ClothAdd to cartDescriptionMicro Water Filter Purifier Stainless Steel Front-facing Wire MeshSpecificationMaterial:PlasticSize:as the picture shows(Pls allow 1-3mm measurement error)FeaturesStrict processConvenient in usePackage include1 x Water Filter Parts
Reviews
There are no reviews yet.