Lichee Pi Zero 1.2GHz Cortex-A7 512Mbit DDR Core Board Development Board Mini PC
$32.22
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Introduction
Lichee pi Zero (hereafter referred to as Zero) is a delicate mini Cortex-A7 core board/development board, which can be used for beginners to learn Linux or for product development. Zero offers a wealth of peripherals (LCD, ETH, UART, SPI, I2C, PWM, SDIO…) and powerful performance (~24M~1.2G, 64MB DDR**) on a slightly longer SD card size (~ 45x26mm).Zero uses a compact PCB design that makes development and use very convenient
Inline breadboard
Inline 40P RGB LCD
Use OTG port for power supply and data transmission (virtual serial port, virtual Ethernet, etc.)
Networking with stacked WiFi modules
Direct patch
Zero provides Mainline Linux support. You can use any programming you are familiar with on Linux.
Hardware parameter
CPU:Allwinner V3S, ARM Cortex-A7, fastest 1.2GHz
RAM:integrated 64MB DDR2
Memory
– ReservedSOP8 SPI FlashPad(customizable patch 8~32MB SPI Nor Flash,128MB Nand Flash)
– On-board half-slot TF card holder, can be started by TF
Display
– General 40P RGB LCD FPC holder
1. Inline 40P 4.3/5/7 Inch screen(on-board backlight driver), 50P 7/9 inchscreen can be inserted through the adapter plate
2. Resolution support 272×480, 480×800,1024×600 etc.
3. On-board resistive touch screen chip,support resistive screen
– On-board RGB LED
Communication Interface
– SDIO x2,Can be used with the matching SDIO WiFi+BT module
– SPI x1
– I2C x2
– UART x3
– 100M Ether x1(include EPHY)
– OTG USB x1
– MIPI CSI x1
Other interface
– PWM x2
– LRADC x1
– Speakerx2 + Mic x1
Electrical characteristics
– Micro USB 5V power supply
2.54mm Pin 3.3V~5Vpower supply
1.27mm stamp hole power supply
– Output 3.3V and 3.0V(AVCC)
Optional input RTC voltage
– 1GHz linux no-load operating current 90~100mA
full-load operating current ~180mA
– Storage temperature -40~125→
Operating temperature -20~70→
Reference info. (Can click for more detail)
1. Lichee pi zero
2. github
3. Forum
Package Included
1x Lichee pi zero board
1x Adapter
2x Pins
The “2.54mm Pinout Inch means can be inserted directly into the breadboard or connected using standard DuPont wires.
The “1.27mm Inch mark is a pin that is less commonly used or inconvenient to manually wire. It is usually used during patching, or it can be used with a 2.54 pin to offset half of the needle position.
Weight | 0.02 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.