Lichee Pi Zero 1.2GHz Cortex-A7 512Mbit DDR Core Board Development Board Mini PC
$32.22
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Introduction
Lichee pi Zero (hereafter referred to as Zero) is a delicate mini Cortex-A7 core board/development board, which can be used for beginners to learn Linux or for product development. Zero offers a wealth of peripherals (LCD, ETH, UART, SPI, I2C, PWM, SDIO…) and powerful performance (~24M~1.2G, 64MB DDR**) on a slightly longer SD card size (~ 45x26mm).Zero uses a compact PCB design that makes development and use very convenient
Inline breadboard
Inline 40P RGB LCD
Use OTG port for power supply and data transmission (virtual serial port, virtual Ethernet, etc.)
Networking with stacked WiFi modules
Direct patch
Zero provides Mainline Linux support. You can use any programming you are familiar with on Linux.
Hardware parameter
CPU:Allwinner V3S, ARM Cortex-A7, fastest 1.2GHz
RAM:integrated 64MB DDR2
Memory
– ReservedSOP8 SPI FlashPad(customizable patch 8~32MB SPI Nor Flash,128MB Nand Flash)
– On-board half-slot TF card holder, can be started by TF
Display
– General 40P RGB LCD FPC holder
1. Inline 40P 4.3/5/7 Inch screen(on-board backlight driver), 50P 7/9 inchscreen can be inserted through the adapter plate
2. Resolution support 272×480, 480×800,1024×600 etc.
3. On-board resistive touch screen chip,support resistive screen
– On-board RGB LED
Communication Interface
– SDIO x2,Can be used with the matching SDIO WiFi+BT module
– SPI x1
– I2C x2
– UART x3
– 100M Ether x1(include EPHY)
– OTG USB x1
– MIPI CSI x1
Other interface
– PWM x2
– LRADC x1
– Speakerx2 + Mic x1
Electrical characteristics
– Micro USB 5V power supply
2.54mm Pin 3.3V~5Vpower supply
1.27mm stamp hole power supply
– Output 3.3V and 3.0V(AVCC)
Optional input RTC voltage
– 1GHz linux no-load operating current 90~100mA
full-load operating current ~180mA
– Storage temperature -40~125→
Operating temperature -20~70→
Reference info. (Can click for more detail)
1. Lichee pi zero
2. github
3. Forum
Package Included
1x Lichee pi zero board
1x Adapter
2x Pins
The “2.54mm Pinout Inch means can be inserted directly into the breadboard or connected using standard DuPont wires.
The “1.27mm Inch mark is a pin that is less commonly used or inconvenient to manually wire. It is usually used during patching, or it can be used with a 2.54 pin to offset half of the needle position.
Weight | 0.02 kg |
---|
Customers Also Viewed
50pcs 3296W 50 ohm Trimpot Trimmer Potentiometer
$13.20Electronic Accessories & SuppliesAdd to cartSpecificationResistance:50 ohmPower (Watts):0.5W, 1/2W Tolerance:±10% Temperature Coefficient:±100ppm/°C Number of Turns:25 Adjustment Type:Top Adjustment Resistive Material:Cermet Mounting Type:Through Hole Termination Style:PC Pins Size / Dimension:9.53 x 4.83 x 10.03mmPackage included50 x Potentiometer
3pcs DC-DC 3V-35V To 4V-40V Step Up Power Module Adjustable Boost Converter Adjustable Voltage Board
$60.09Power Supply ModuleAdd to cartDescriptionInput Voltage:DC 3V-35VOutput Voltage:DC 4V-40V (continuously adjustable)Efficiency:94%(MAX)Size:L37mm*W32mm*H15mmWorking Temperature:-40-+85 degreesLoad capacity:Max 80WThe way of Connection:the connection terminal does not need to be soldered, the inchINinch is the input, and the inchOUTinch is the output.NoteWhen the output voltage is closer to the output voltage,the carrying capacity is higher,and the efficiency is also higher.Measurement reference tableInput voltage:Output voltage:Maximum …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mm
$28.42Power Supply ModuleAdd to cartParameterModel:S-120-12AC input voltage range:220VACInput current:0.5A/230VAC impulse current:Cold-start current 9A/230VDC output voltage:12VDC output power:120WRated output current:10AOutput voltage error:±1%Efficiency:85%Wave and noise:150mVp-pInlet stability:±0.5%Load stability:±0.5%Leakage currentOverload protection:105% – 150% rated power, automatically recoveryVibration:10500Hz,2G 10min./1cycle,Period for 60min,Each axesCooling method:Fan assisted cooling Working temperature and humidity:- 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost)Store temperature and …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mmRead More
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool Pump
$91.11Electrical Pump & ValveAdd to cartFeatures-Small size, high energy, low noise, long life, AC / DC dual-use-With a belt buckle,easy to carry-Stable performance,strong volume-Built-in high quality rechargeable lithium battery,cycle life>=500 times-Less than 150mA ultra-low power,full power continuous supply of oxygen for more then 24 hours-External 5V power supply input,can simultaneously oxygen and charging,longer batter life-Using waterproof technology, effective protection of …
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool PumpRead More
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USB
$153.05Smart Robot & Solar PanelAdd to cartFeatures1.Using the third-generation Sunpower solar panels imported from the United States, the photoelectric conversion rate is as high as 23% ~ 25%, and there is electricity when there is light.2. Dual USB output, charging speed 5V / 2.9A.3. High light transmission, tough and aging resistant material, worry-free charging.4. The external net bag can hold mobile …
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USBRead More
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster Demister
$113.39Temperature ControllersAdd to cartFeatures– Integrated heating and cooling, water heating system.– 4 Air outlet, 3 big fan, and 2 water pipe connections.– Use for defrosting, demisting, deicing.– Provide the comforts for travel, camping, glass defrost mist.– It can be installed at the bottom of the seat, next to the foot, or at any position on the car.– With …
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster DemisterRead More
EleksMaker EleksZAxis Z Axis & Spindle Motor Drill Chunk integrated Set DIY Upgrade Kit for Laser Engraver CNC Router
$186.29Engraving Parts & AccessoriesAdd to cartWhat’s the improvement EleksZAxis 2019 is not only a Z axis holder, but also equipped with a spindle motor and a drill chunk which means it’s a more powerful and ready-to-use integrated set.EleksMaker® 555 spindle motor gives this kit stable and qualified power source.Unlike the other loose shaft coupler, JT0 0.3-4mm drill chunk is more …
Reviews
There are no reviews yet.