3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for Phone MP3 MP4
$10.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class.
Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge.
Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W.
This module uses multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)!
This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone.
Specification
Module properties:Non-isolated step-up module (BOOST)
Input voltage:2.5-6V
Output voltage:4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v)
Output current:1000mA (Max)
Efficiency:92%(Max) (the higher the input voltage, the higher the efficiency)
Switching frequency:1MHz
Output ripple:20mV (MAX)
Operating temperature:Industrial (-40°c to +85°c)
Voltage regulation:±2.5%
Short circuit protection:None (please use the lithium battery with protection)
Input:IN + postive, IN – negative
Output:USB output
Size:3 x 1.3 x 0.8cm
Application
This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging.
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
Note
This module is a fixed 5V output module
Modules indicated above IN – (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module
This module has an LED light, when the charge when the LED lights can be used as indicator
Package included
3 x USB boost module
Weight | 0.0024 kg |
---|
Customers Also Viewed
WQ-BX-S2 Water Filter Activated Carbon Cartridge Replacement Refrigerator Filter for SAMSUNG
$52.64Switch AccessoriesAdd to cartSpecificationsMaterial:PC+Activated CarbonMin.Working pressure:207 kPa/30 psiMax.working pressure:689 kPa/100 psiMin.operating temperature:0.6°C/33°FMax.operating temperature:38°C/100°FRated service flow:0.5gpm(1.89L/min)Rated capacity:300 gallons(1136 liters)Features-Replace the filter every 6 months.-Made of coconut shell carbon fiber and PC,nice quality and filter performance.-Help to filter water,reduce residual chlorine and peculiar smell,which makes water taste better.-The refrigerator water filter have been tested and certified by NSF International against …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266
$26.23Smart ModuleAdd to cartDescriptionESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technology, power and optimized RF characteristics, which is safe, reliable, …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266Read More
DIY Holographic Projection Building Block Virtual Imaging Blocks Toys
$19.97PhysicsAdd to cartName:DIY Holographic Projection Building Block Virtual ImagingModel:JY-WIZT00300SpecificationNet weight:189.4gPackaging size:395*285*5mmComposite finished product size:140*140*55mmColour:Log colourMaterial:WoodFeatures– Training of Practical Ability– Types of Science and Education:Physics– Intelligence trainingNote1. Because there may be slight deviation in manual measurement, please refer to the actual object.2. The picture is the finished product after installation and the shipment is the installation material package.3. …
DIY Holographic Projection Building Block Virtual Imaging Blocks ToysRead More
Laser Protective Goggles Glasses 405nm 445nm 650nm Red Blue Blue-violet Laser Eye Protection Safety
$26.31Laser Safety GlassesAdd to cartSpecificationName:Laser Protective GogglesMaterial:PlasticOptical Density (OD):OD4+Typical Laser Wavelength:650nm, 445nm, 405nmFeatures– Good protective performance, can filter 80% strong laser light.– Perfect for laser protection of 650nm red laser, 445nm blue laser, 405nm blue-violet laser.– Offer effective protection for your eyes in laser engraving operation.Package Included1 x Laser Protective Goggles1 x Storage Pouch
5Pcs Rain Sensor Water Level Measure Module Raindrop Analog Sensor Board
$12.88Sensor & Detector ModuleAdd to cartParameterWorking voltage:DC 5VWorking current:less than 35MAType:Analog SensorTest area:40 mm x 18 mmOperating temperature:10 → to 30 →Working humidity:10% – 90% No condensationFixing hole size:Φ3mmProduct size:60mm x 22mmApplicable occasions:Design of water level alarmFeatures:Simple, easy to use, small size, light, cost-effectivePackage includes5 x Rain Sensor
3pcs 36*IR LED Board for CCTV Camera Night Vision 60mm for CS LEN infrared Light Board DC12V
$12.06LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsLED Number:36PCSBoard Diameter:60 mm (outside) / 34mm (inside)Power Supply:DC12V / 220mA (typical)Operation …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$27.46Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
Reviews
There are no reviews yet.