3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for Phone MP3 MP4
$10.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class.
Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge.
Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W.
This module uses multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)!
This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone.
Specification
Module properties:Non-isolated step-up module (BOOST)
Input voltage:2.5-6V
Output voltage:4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v)
Output current:1000mA (Max)
Efficiency:92%(Max) (the higher the input voltage, the higher the efficiency)
Switching frequency:1MHz
Output ripple:20mV (MAX)
Operating temperature:Industrial (-40°c to +85°c)
Voltage regulation:±2.5%
Short circuit protection:None (please use the lithium battery with protection)
Input:IN + postive, IN – negative
Output:USB output
Size:3 x 1.3 x 0.8cm
Application
This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging.
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
Note
This module is a fixed 5V output module
Modules indicated above IN – (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module
This module has an LED light, when the charge when the LED lights can be used as indicator
Package included
3 x USB boost module
Weight | 0.0024 kg |
---|
Customers Also Viewed
20pcs DC-DC Buck Regulator Module 9V/12V/24V to 5V USB Charging Vehicle Power Supply Buck Module
$41.78Power Supply ModuleAdd to cartDescriptionProduct size:35.5*17*8.3mmInput voltage range:6-26VThe output voltage is 5.2V (considering the loss of charging line, the output terminal is about 5.2V, and the load terminal is about 5V).The maximum output current is 3A (without the heat sink, the output current is 2A).Note 1:Positive and negative can not be reversed, and the input voltage should not exceed …
3pcs AT Firmware DT-W5G1 5G WiFi Module 2.4g/5g Dual-band Module with Antenna interface for Wireless Image Transmission
$39.69Smart ModuleAdd to cartDescriptionSOC characteristicsBuilt-in 160MHz MIPS RISC processor512K SRAMCommunication rate:72Mbps (20MHz)Optimal balance & LLR quantificationWi-Fi featuresSupport 802.11 a/b/g/n, 2.4-2.5GHz, 4.9-5.85GHz2.4GHz Rx sensitivity:-75dBm/11n HT20 MCS7, Tx Power:21dBm5GHz Rx sensitivity:-74dBm/11n HT20 MCS7, Tx Power:16.5dBmSupport Station, SoftAP modeSupport Wi-Fi Direct (P2P)Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRCP2P discovery, P2P GO mode/GC mode and P2P …
Geekcreit LCR-T3 LCR-T4 Mega328 Transistor Tester Diode Triode Capacitance ESR Meter Assembled
$34.98Power Supply ModuleAdd to cartSpecificationsResistor:0.1ω-50MωCapacitor:25pF-100000uFInductance:0.01mH – 20HWorking power:DC-9VStandby current:0.02uAOperating current:25mAMaterial:Metal+PlasticSize:about 11.1cm/4.37inchx2.6cm / 1.02inchx8.5cm/3.34inch[Conversion:1cm=0.3937 inch, 1inch=2.54 cm]Description1. Add boot voltage detection function2. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components3. Automatic test out the pin element and displayed on the LCD4. Can be detected …
1Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included1 Pair x 13MM Waterproof Aviation Connector
5Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$30.28Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included5 Pair x 13MM Waterproof Aviation Connector
230W 7R DJ Disco Stage Head Light Lamp Moving Beam Ballast Power Supply Module
$45.91Power Supply ModuleAdd to cartTechnical SpecificationsMini size, compact design.sturdy and durable.Easy to use and convenient to operate.Application:Commercial, Engineering, Indoor, Outdoor, Professional, SailingFeatures and BenefitsMaterial:PCBVoltage:110-220VWattage:230WType:7R BallastLength:13cm/5inchPackage Includes1 x Power Supply ModuleNotice1. Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.2. The color may have different as the difference display,pls understand.
Emakefun DC5V Gesture Sensor Module with 4PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$15.17Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:4PIN anti-reverse connection Dupont line 12C3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x Gesture Sensor Module(the other items are not includes)
5pcs 5V 0.6A 3W Qi Standard Wireless Charging DIY Coil Receiver Module Circuit Board Wireless Charging Coil for Smart Phone
$40.93Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsOutput:5V 0.6APower:3WCircuit board size:20 x 20 x 1 mmMagnetic shield size:28 x 28 x 0.1 mmCoil size:24 x 8 x 0.5 mmCoil outer diameter:24mmCoil inner diameter:8 mmApplication:Can be used for wireless charging …
Reviews
There are no reviews yet.