3Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module for Phone MP3 MP4
$10.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class.
Module with undervoltage protection, undervoltage protection into state below 2.5V, can be more better protect the battery, to avoid excessive discharge.
Module can modify the fixed resistor adjusts the output voltage can be adjusted up to 12V output, but to ensure that the output power of less than 5W.
This module uses multilayer ceramic capacitors as main filter capacitor, the output ripple can be as low as 20mV (5V1A output case)!
This module uses a standard USB interface, you can use all universal USB charging mobile phones, MP3, MP4 and other equipment, the perfect support for IPHONE and other mobile phone.
Specification
Module properties:Non-isolated step-up module (BOOST)
Input voltage:2.5-6V
Output voltage:4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v)
Output current:1000mA (Max)
Efficiency:92%(Max) (the higher the input voltage, the higher the efficiency)
Switching frequency:1MHz
Output ripple:20mV (MAX)
Operating temperature:Industrial (-40°c to +85°c)
Voltage regulation:±2.5%
Short circuit protection:None (please use the lithium battery with protection)
Input:IN + postive, IN – negative
Output:USB output
Size:3 x 1.3 x 0.8cm
Application
This module can be used for DIY mobile power output, enabling single or two ordinary lithium battery to 5V boost to the mobile phone or PSP device charging.
DIY a mobile power supply, only need one battery, you can output 5V voltage for your phone, MP3, MP4, PSP charger, very easy.
In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.
Note
This module is a fixed 5V output module
Modules indicated above IN – (negative input), IN + (positive input), OUT-(negative output), OUT + (positive output) must be connected correctly, otherwise it may cause damage to the module
This module has an LED light, when the charge when the LED lights can be used as indicator
Package included
3 x USB boost module
Weight | 0.0024 kg |
---|
Customers Also Viewed
3Pcs RobotDyn RTC DS1307 Real Time Clock Battery Shield with Pin Headers Set
$18.67Expansion Board & ShieldAdd to cartPINOUT:http://img.staticbg.com/file/products/20171226001032PINOUT-RTCDS1307.pdfSchematic:http://img.staticbg.com/file/products/20171226001140Schematic-RTCDS1307.pdfFeatureType:Logic ICsPackage includes3 x RTC DS1307 (real time clock) + battery3 x Wemos D1 mini shield6 x Male Pin Header 8pins6 x Female Pin Header -BLACK 8pins6 x Stackable Header – BLACK 8pins
110V Electric Pet Heating Mat Winter Heated Blanket 2 Speeds Waterproof Cat Dog Heater Pads Bed Bite Resistant
$40.49Laboratory Heating EquipmentsAdd to cartSpecificationsType:CushionRated voltage:110V 50HzRated power:20WPlug:US Plug(We will provide adapter according to delivery country)Material:Polyester + cottonSize:45cmx45cm/17.7inchx17.7inchFeature-Soft cotton texture and vivid prints attract pets’ attention.-Two-speed temperature adjustment (high temperature 50 °C,low temperature 30 °C),can be adjust the temperature level.-The heating rate is fast, warm and comfortable,overheat protection.-Scratch and bite resistant,not easily damaged,thick and durable.-Keep warmer in winter,safe and …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G Module
$19.67Motherboard & Development BoardAdd to cartDescriptionFull integration on one board:Uno R3 ATmega 328 and WiFi ESP8266 with memory 32Mb (MegaByte). All of the modules can work together or each separately. And everyone has their own pinout headers.The convenient solution for the development of new projects requiring Uno and WiFi.Via USB you can update sketches and firmvare for ATmega328 and for …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G ModuleRead More
3pcs CA-255 10-42inch LED TV Constant Current Board Universal inverte LED TV Backlight Driver Board
$16.47Driver ModuleAdd to cartSpecificationInput Vol:10.8-28VOutput Vol:15-88vsize:8.5×4.5CM1.VCC:power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)2.ON / OFF, ON, EN, ON_BL etc:switch foot, foot switch signal (The voltage range is between 2.5V-5V)3. PWM, PDIM, VDAJ, BL-PWM et al:brightness adjustable feet (Dimming have two modes, one is in digital mode -PWM, one is analog dimming -DC4.The …
30pcs A4988 Driver Module Stepper Motor Driver Board with Heatsink
$54.70Motor PWM Speed ControllerAdd to cartFeature1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes:full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate5. Automatic current decay mode detection/selection6. Overheat shutdown circuit, under-voltage lockout, cross-current …
30pcs A4988 Driver Module Stepper Motor Driver Board with HeatsinkRead More
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$79.70Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
5pcs W3231 incubator Temperature Controller thermometer Cool/Heat Digital Dual Display with NTC Sensor DC12V
$41.22Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionTemperature Control:-55C~120C/-67F~ 248FTemperature Control Accuracy:0.1 C / 0.1 FDisplay Color:Red + BlueWorking Power Supply:DC12VTemperature Sensor:1M NTC 10K Product Size:79.2mm≠41.9mm≠26.3mmHole Size:72.1mm≠39.2mmOperation and Display PanelWarning codeCodeReason for errorSolutionHHHTemperature exceeds alarm temperatureThe temperature drops below …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted Tank
$68.84ConnectorsAdd to cartTechnical SpecificationsColor:WhiteMaterial:ABS and MetalTube Inner Size:4mmFeatures and Benefits Easy to set up CO2 system is designed for low cost planted tank use. 2 air-pipe locks on the bottle cap, prevent the air-pipe get loose ABS bottle caps, good pressure resistance, NO deformation Specialized pressure gauge, build-in automatic safe valve,Keeps pressure in the safe level, never …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted TankRead More
Reviews
There are no reviews yet.