600W 12A DC 8V To 16 V Or DC 12V To 60V Adjustable Boost Converter Power Supply Board Step-Up Module
$39.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
600W high power boost module
Input voltage:12-60V or 8-16V Selectable
Wide output voltage (12-80V) adjustable
Output current (0.1-12A) Adjustable
High efficiency
Ultra-low dropout voltage
Module parameters
Module Properties:non-isolated step-up module (BOOST)
Input voltage:two input voltage ranges selectable (selectable with jumper on board)
1). 8-16V input ( In this input mode,please do not over-voltage input, otherwise it will burn module)
2). 12-60V input(default)
Input Current:16A (MAX) Please enhance heat dissipation when current over than 10A
Static Current:15mA (12V to 20V. The output voltage increase, the static current will increase a little)
Output voltage:12-80V (continuously adjustable) ( the default output about 19V )
Output Current:12A MAX, if over 10A please enhance heat dissipation ( the higher the dropout voltage, the smaller the current )
Constant current range:0.1-12A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W, Input 36V * 10A = 360W, input 48V * 10A = 480W, input 60V * 10A = 600W. If you need more high-power, two modules can be used in parallel , for example if you need 15A output, then connect two modules in parallel ,the current of each module set to 8A then is OK.
Operating temperature:-40°C to +85°C ( if temperature too high , please enhance heat dissipation)
Operating Frequency:150KHz
Conversion efficiency:up to 95% ( affected by input voltage, output volage, current and dropout voltage )
Operating Ripple:about 100mV
Load Regulation rate:about 0.2%
Voltage regulation rate:about 2%
Overcurrent protection:Yes ( input exceeds 17A, automatically reduces the output voltage , maybe have errors)
Short-circuit protection:Yes (input with 20A fuse) double circuit protection, more safe.
Input Reverse Polarity Protection:No , ( if necessary , input add one diode in series)
Output prevent backflow:Yes, no need to add prevent backflow diode for charging .
Installation:two 3mm screws
Wiring:terminals, no welding.
Size:76mm(L) x 60mm(W) * 56mm(H, the height of the heatsink is included)
Net weight:205 g
Applications
DIY a regulated power supply, only 12V input, output 12-80V adjustable.
Power supply for your electronic device , according to your system can set the output voltage value .
As a vehicle power supply, power supply for your laptop/PDA etc.
DIY a laptop mobile power supply, with 12V high capacity lithium battery pack, travel no worry.
Solar panels regulator.
Charge for the battery.
Drive high-power LED.
Instructions
Choose input voltage range. Default input voltage range is 12-60V. If you need 8-16V input, please short connect the jumper on the board
Output current adjustment method
Adjust CV potentiometer, according to your battery or LED, set the output voltage value to your need.
Counterclockwise adjust CC potentiometer about 30 laps, make the output current in the minimum. Connect the LED, adjust CC potentiometer to the desired current. If charge for the battery, the battery should fully discharge at the first, then connected to the output, adjust CC potentiometer to desired current. (Must use completely discharged battery to set, otherwise inaccurate. Because the more battery power remain, the smaller the charge current. ) Please do not use short-circuit way to adjust current, because special circuit structure of the boost converter can not adjust in that way.
Package included
1 x DC-DC Boost Converter Module 600W
Weight | 0.209 kg |
---|
Customers Also Viewed
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home Smart
$8.73Relay ModuleAdd to cartManual:http://myosuploads3.hobbyant.com/products/20190219/20190219034014C255V9V12V.pdfApplicationsThis module is a switch instant turn-on trigger delay module, which can be applied to home intelligent systems, anti-theft alarm delay, door control system, automation equipment control, PLC industrial control, electronic development and so on.Description1. Using advanced high-quality timing chip control, accurate timing, performance is much better than 555 chip;2. The trigger terminal has optocoupler …
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home SmartRead More
2.5W Mini Laser Engraving Machine 2-axis Engraving Machine for Wood Plastic Paper Bamboo Horns Leather Sponge Paper
$503.82Laser Engraving MachineAdd to cartProduct instruction and installation please:https://drive.google.com/openid=1MH931sFiPqf-L45WqXmfEAN4TrrFrlu-SpecificationsName:2-axis Engraving MachineModel:969407Size:600*550*150mm/24*22*6inStroke:380*260mm/15*10inCommunication Interface:miniUSBLaser Power:2500mwStepper Motor:42H34SVoltage:AC110-220V to DC12VControl Board Selection:DVP SE 2-axis engraving machine control boardSoftware Support:wifidevelo, Candle, Benbox, GrblController, LiteFire, etc. All GRBL-enabled softwareFeatures-The new custom V-slot aluminum matching rolling bearing X24, the accuracy is better and more stable.-There is no limit to the size and height of the engraving …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage Meter
$20.60Test & Measuring ModuleAdd to cartFeature1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected.2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage MeterRead More
6W 6V 260x140x2.5mm S0506 Portable Semi-flexible Solar Panel with Back Junction Box Single USB Charger + 4xSucker + 2x Carabiner Kit
$32.26Smart Robot & Solar PanelAdd to cartFeatures– Portable and frame design– Standard USB output– thin design make it very easy to carry.– Monocrystalline silicon solar cells and epoxy resin surface seal.– Comes with four suckersSpecifications– Size:Approx. 26x14x0.3cm/ 10.24×5.51×0.12inch-Actual Power:6W– Solar output:6V 1700mA– Voltage regulator tube output:5V 1200mA– USB regulated output:5V 1200mAh– Output:USB 5V ,1200mAh– Charge time:3-5h– Solar open circuit voltage:6.8V (max)– …
DC 7V-24V Audio input Switch Board 4-way Audio Source Switch Board Audio Signal input Switch Board Switch Relay DIY Kit
$18.83DIY Electronic KitsAdd to cartSpecificationName:Audio signal switcherVoltage:DC 7V-24V, AC 6V-18VFunction:Four groups of audio signals are connected at the same time, and one group of signals is outputMethod:Rotary switching, switching once when rotating.Relay switching, zero loss.Application:computer, TV, mobile phone, home theater.Package included1set of Audio signal switcher
22.5V 1.25A 33W AC Power Adapter Charger for iRobot
$66.81AC/DC AdaptersAdd to cartSpecificationsName:AC Power Adapter ChargerInput:AC 100-240V 1.5A 50/60HzOutput:DC 22.5V 1.25A 33WInterface:5.5mm*2.5mmSafe:CE,RohsColor:BlackMaterial:PCSize ①Length:11.3cm ②Width:4.5cm ③Height:3.1cm ④Total Length:120cm (including wire)Fit for iRobot 400 500 600 700 770Features1.With heat dissipation intelligent chip and environmentally friendly material.2.Avoid power leakage and fire prevention.3.Strong and durable,long serve life.4.The tool is simple & easy to use.5.Small and beautifully designed and strong practicability.6.High performance …
22.5V 1.25A 33W AC Power Adapter Charger for iRobotRead More
Desktop Game Fun Game Penguin Ice Breaking Save the Penguin Great Family Education Toys
$28.42MathematicsAdd to cartFeatureThe One Who Make The Penguin Fall OffThe Will Lose This GameDon’t Fall Into The Trap Of The Opponent!See Who Can Get The Final Victory!SpecificationColor:As pictureSize:About 23*23*6CMMaterial:Environmentally Materials,ABS PlasticPackage Include1Set x Penguin Ice BreakingPlease NoteThe Picture is only for reference, please make the object as the standard.
Reviews
There are no reviews yet.