9V-12V MP3 WMA WAV APE USB bluetooth Lossless Audio Decoder Board Support bluetooth / Hands-free Calls with Headset Output
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1:Size:83mm (L) ≠ 28mm (H) ≠ 30mm (inner depth) center hole pitch:76mm
2:Play with tfcard or USB flash disk
3:9v-12v power supply
4:The decoding board is equipped with blue backlight LED lamp, which can increase the music atmosphere when playing.
5:FM function 87.5-108.0mhz.
6:Aux input function.
7:Support handsfree Bluetooth call function.
8:Fast forward / backward
9:Power off memory volume
10:Power on default Bluetooth mode
11. The decoding board supports:full loop play, single loop play
Instructions
Mp3 play operation
Insert the U disk or SD card with MP3 songs copied in the power on state, and the machine will automatically recognize and play
When playing MP3, the functions are as follows
‘Previous’ short press to play the previous song, long press to decrease the volume;
‘Next song’ short press to play the next song, long press the volume increase;
‘Mode’ machine mode selection:cycle in FM, aux and MP3;
‘Play / pause’ press to pause the song being played for the first time and press again to restore the playing state.
RPT key of remote control:press this key for single loop or full loop. The display ‘one’ is a single loop. All is full loop
EQ key:press this key for equal sound effect:there are six sound effects respectively.
The key functions in FM sta tus are as follows
‘Previous’ short press from high to low search station, long press volume reduction;
‘Next song’ short press from low to high search station, long press volume increase;
‘Mode’ machine working mode selection:cycle in of USB / SD / Aux / FM / blue;
‘Play / pause’ short press to jump to the next stored station, long press for 3 seconds to perform automatic search and store the station
Aux function operation
Press the ‘mode’ key on the following board to switch the machine to the ‘aux’ state. At this time, other function keys are invalid, and only the ‘mode’ key is valid.
The sound source is input by the 3P interface on the board, and the volume is controlled by the external sound source equipment.
LED display part
Mp3 sta tus:display whether the currently played songs are from the U disk or SD card, and display the playing time progress;
When adjusting the volume:display the volume level, which is level 16
Aux sta tus:display the current working sta tus;
FM sta tus:display the current station frequency.
Bluetooth operation
Press ‘mode’ on the panel to switch the machine to ‘blue’ state. At this time, the three LED lights are in continuous flashing state. Turn on the audio device with Bluetooth function, search for ‘yxy-cy04-bt’ and connect it. The LED lights stop flashing continuously and enter the normal playing state. The volume can be controlled by the external sound source device, or adjusted by long pressing ‘previous’ and ‘next’; Short press ‘play / pause’ for incoming call and long press for rejection.
Press ‘play / pause’ briefly when calling out or during a call to hang up.
The operation on the remote control is the ‘play / pause’ key on the remote control
Wiring Instructions
1. 2p red seat:GND is connected to the negative pole of power supply, + 12V is connected to the positive pole of DC dc7-12v;
2. 3P white seat:outr is the audio right channel output, agnd is the audio ground wire, outl is the audio left channel output;
3. 3P white seat:Lin is the left channel input of the external voice, agnd is the ground line of the external voice, and Rin is the right channel input of the external voice;
4. The ant white pad is the location for welding the radio antenna. The radio antenna can be copper wire or pull rod antenna with a length of more than 1 m, and the radio effect depends on the geographical environment.
Package Included
1 x USB bluetooth Lossless Audio Decoder Board
Weight | 0.037 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.