9V-12V MP3 WMA WAV APE USB bluetooth Lossless Audio Decoder Board Support bluetooth / Hands-free Calls with Headset Output
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1:Size:83mm (L) ≠ 28mm (H) ≠ 30mm (inner depth) center hole pitch:76mm
2:Play with tfcard or USB flash disk
3:9v-12v power supply
4:The decoding board is equipped with blue backlight LED lamp, which can increase the music atmosphere when playing.
5:FM function 87.5-108.0mhz.
6:Aux input function.
7:Support handsfree Bluetooth call function.
8:Fast forward / backward
9:Power off memory volume
10:Power on default Bluetooth mode
11. The decoding board supports:full loop play, single loop play
Instructions
Mp3 play operation
Insert the U disk or SD card with MP3 songs copied in the power on state, and the machine will automatically recognize and play
When playing MP3, the functions are as follows
‘Previous’ short press to play the previous song, long press to decrease the volume;
‘Next song’ short press to play the next song, long press the volume increase;
‘Mode’ machine mode selection:cycle in FM, aux and MP3;
‘Play / pause’ press to pause the song being played for the first time and press again to restore the playing state.
RPT key of remote control:press this key for single loop or full loop. The display ‘one’ is a single loop. All is full loop
EQ key:press this key for equal sound effect:there are six sound effects respectively.
The key functions in FM sta tus are as follows
‘Previous’ short press from high to low search station, long press volume reduction;
‘Next song’ short press from low to high search station, long press volume increase;
‘Mode’ machine working mode selection:cycle in of USB / SD / Aux / FM / blue;
‘Play / pause’ short press to jump to the next stored station, long press for 3 seconds to perform automatic search and store the station
Aux function operation
Press the ‘mode’ key on the following board to switch the machine to the ‘aux’ state. At this time, other function keys are invalid, and only the ‘mode’ key is valid.
The sound source is input by the 3P interface on the board, and the volume is controlled by the external sound source equipment.
LED display part
Mp3 sta tus:display whether the currently played songs are from the U disk or SD card, and display the playing time progress;
When adjusting the volume:display the volume level, which is level 16
Aux sta tus:display the current working sta tus;
FM sta tus:display the current station frequency.
Bluetooth operation
Press ‘mode’ on the panel to switch the machine to ‘blue’ state. At this time, the three LED lights are in continuous flashing state. Turn on the audio device with Bluetooth function, search for ‘yxy-cy04-bt’ and connect it. The LED lights stop flashing continuously and enter the normal playing state. The volume can be controlled by the external sound source device, or adjusted by long pressing ‘previous’ and ‘next’; Short press ‘play / pause’ for incoming call and long press for rejection.
Press ‘play / pause’ briefly when calling out or during a call to hang up.
The operation on the remote control is the ‘play / pause’ key on the remote control
Wiring Instructions
1. 2p red seat:GND is connected to the negative pole of power supply, + 12V is connected to the positive pole of DC dc7-12v;
2. 3P white seat:outr is the audio right channel output, agnd is the audio ground wire, outl is the audio left channel output;
3. 3P white seat:Lin is the left channel input of the external voice, agnd is the ground line of the external voice, and Rin is the right channel input of the external voice;
4. The ant white pad is the location for welding the radio antenna. The radio antenna can be copper wire or pull rod antenna with a length of more than 1 m, and the radio effect depends on the geographical environment.
Package Included
1 x USB bluetooth Lossless Audio Decoder Board
Weight | 0.037 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.