DIY Electronic Kit Rechargeable FM Stereo Digital Radio DIY Parts
$23.52
Style #1 / Style #2 / Style #3 / Style #4 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Use advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation technology (PLL) to make the sound quality more realistic, the performance more stable, and the long-term working frequency has no deviation
The reception signal is good, 22 stations can be received locally.
2. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference.
3. It has the functions of automatic search and storage of radio stations, easy to operate and use.
4. Built-in 30-level digital volume adjustment, key operation can be easily completed.
5.Automatically memorize the data before the power failure.
6.Using quartz crystal for frequency stabilization, the emission frequency will no longer drift when the temperature changes.
7. Full frequency band (76-108MHZ) automatically search for signal frequency band and store memory.
8.Built-in rechargeable lithium battery and charging circuit, it can be charged with a mobile phone charger, the blue light is on when charging, and the light is off when it is full.
Specification
PCB board size:7.1CM*3.6CM
Shell size:8.2CM*4.9CM*2.0CM
Support headset:in-ear headset
Output power:500mW (drive earphone)
Frequency response range:50Hz-18KHz
Channel:stereo
Receiving frequency adjustment range
Turn off campus radio 87.0MHz-108.0MHz, turn on campus radio 76.0MHz-108.0MHz
Equivalent noise:◎30dB
Supply voltage:3.0V-5.0V
Current:40mA
Battery size:5x20x30 (thickness X width X length)
Package battery capacity:250MAH, it can be used for about 4-5 hours when fully charged.
Style:1:Parts + shell 2:Parts + shell + earphone 3:Finished product + shell
4:Finished product + shell+ earphone
Note
Do not touch the back components of the module when working, so as not to affect the normal operation of the module or cause a short circuit to burn the module.
This module is a radio sensitive device. Interference from the power supply or nearby may affect the normal operation of the module.
Therefore, it is recommended to use a battery or a power frequency transformer to obtain a stable voltage obtained by stabilizing the power supply for the module. Cannot use switching power supply
(Such as mobile phone chargers, and any other switching power supplies), power banks, and no working Class D amplifiers, microwave ovens and other equipment are nearby.
Otherwise, the interference generated by these devices will affect the receiving effect of this module. Those who buy the module and develop it by themselves, please pay attention.
Instructions for use
After each module is completed, the channel will be searched automatically first. Long press ‘Auto Search (AUTO key)’ to start automatic search and store the radio stations that can be listened to,
After the search is completed, the first station P01 will be played automatically. The user can press the ‘previous station’ or ‘next station’ button to switch the searched station.
This module can set the backlight state and whether to listen to the campus broadcast frequency band according to the user’s specific usage. The setting method is as follows.
When the power is off, press and hold the VOL+, VOL- button and power on the LCD display C1 to turn on the campus broadcast C0 to turn off the campus broadcast band, and the settings will take effect after restarting.
To set the backlight state, press and hold the up and down radio buttons at the same time when the power is off. B1 indicates that the backlight is always on, and B0 indicates that the backlight is turned off for 20 seconds. The settings will take effect after restarting. Change the setting status and repeat this step to switch. The factory unified setting is not to turn on the campus broadcast frequency band, and the backlight goes out for 20 seconds without operation.
Pakage included
1 x PCB board
1 x Audio stand
6 x 6*6*14 button
1 x USB MICOR socket (fixed feet are plug-ins)
1 x 12D07 side switch
2 x TP4054
3 x 104 monolithic capacitor
2 x 10K resistor
1 x 510 ohm resistor
1 x 3MM LED white hair blue
1 x Radio module
Weight | 0.069 kg |
---|
Customers Also Viewed
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5V
$26.35Power Supply ModuleAdd to cartDescriptions3-Cell(3S) VersionInput voltage:DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about:4.05V-5.1VCharging current about:230mA-240mAUSB power protectionShort circuit protection and zero volt battery activationBattery protectionOperating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30x 15 x 4mmNoteThe output voltage cannot be measured with a multimeter without a battery. But can be observed with an oscilloscope.Applicationskids toys carDigital CamerasSolar chargingBluetooth ApplicationsAudio equipmentDigital CameraElectronic …
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5VRead More
5Pcs/Pack 5V 1000mA 165*165mm Monocrystalline Solar Panel Cells with Positive&Negative Cables
$85.54Smart Robot & Solar PanelAdd to cartFeaturesProvide you with high conversion rate and incredibly efficient output.Excellent performance even under the weak sunlight.Portable and solid casing.Application:to charge, for home lighting and different kinds of low-power appliances, for science projects, for solar powered water pump, small solar power system, etc.SpecificationsType:Monocrystalline Size:165*165mmCurrent:1000mA Net Weight:about 600g one packPackage Content:5Pcs x Poly Solar PanelVoltage:5VMPN:Does Not ApplyPackage …
Waveshare 1.54 inch ink Screen Module 152×152 Electronic Paper SPI interface Yellow Black and White 3-color Display
$45.91Display ScreenAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openDatasheet:Click here to openGithub:Click here to openFeaturesNo backlight is needed, and the display content of the last screen can be kept for a long time after power offVery low power consumption, basically only consumes power when refreshingSPI control interface, can be connected to Raspberry/Nucleo and other main control …
Geekcreit DIY Creative Electronic Watch Kit 51 Single-chip LED Digital Tube Clock Training Production Kit
$15.30DIY Electronic KitsAdd to cartDescriptionName:LED Electronic Watch KitPower supply:CR2025 3V button battery (available for testing, there are inevitably extra factors causing insufficient power.)Display:LED red digital tube displaySize:52*52*18mmInstallation:the board need to solder yourself and then assembly the caseFunction:You can press the digital tube button when need to wacth time; it will enter the power saving mode automatically after 5 seconds. …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal Board
$3.56Expansion Board & ShieldAdd to cartQFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardSpecificationDimension:20.25 x 40.64mm / 0.79inch x 1.60inchThickness:1.5mmPanel:FR4DescriptionThe PCB board has two sides.A side for pin pitch size 0.80mm, B side for pin pitch size 0.80mm.It can be used to convert QFN32/QFP32 (600mil width, 2.54mm pin pitch).You can solder filter capacitors or resistors to increase stability and …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardRead More
YJ0007 180W Car Stereo Audio Amplifier Power Boost Board Single 12V input Conversion Double 32V Output
$52.41Boost & Buck ModuleAdd to cartDescriptionAll parts and components of this product are original products, unpretentious and pure in quality; using high-quality original parts not only guarantees safety and quality, but also has a long service life, and more importantly, it is a strong guarantee that the actual performance can reach the design goals.Features1. All components are genuine.2. The main …
Reviews
There are no reviews yet.