DIY Electronic Kit Rechargeable FM Stereo Digital Radio DIY Parts
$23.52
Style #1 / Style #2 / Style #3 / Style #4 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Use advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation technology (PLL) to make the sound quality more realistic, the performance more stable, and the long-term working frequency has no deviation
The reception signal is good, 22 stations can be received locally.
2. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference.
3. It has the functions of automatic search and storage of radio stations, easy to operate and use.
4. Built-in 30-level digital volume adjustment, key operation can be easily completed.
5.Automatically memorize the data before the power failure.
6.Using quartz crystal for frequency stabilization, the emission frequency will no longer drift when the temperature changes.
7. Full frequency band (76-108MHZ) automatically search for signal frequency band and store memory.
8.Built-in rechargeable lithium battery and charging circuit, it can be charged with a mobile phone charger, the blue light is on when charging, and the light is off when it is full.
Specification
PCB board size:7.1CM*3.6CM
Shell size:8.2CM*4.9CM*2.0CM
Support headset:in-ear headset
Output power:500mW (drive earphone)
Frequency response range:50Hz-18KHz
Channel:stereo
Receiving frequency adjustment range
Turn off campus radio 87.0MHz-108.0MHz, turn on campus radio 76.0MHz-108.0MHz
Equivalent noise:◎30dB
Supply voltage:3.0V-5.0V
Current:40mA
Battery size:5x20x30 (thickness X width X length)
Package battery capacity:250MAH, it can be used for about 4-5 hours when fully charged.
Style:1:Parts + shell 2:Parts + shell + earphone 3:Finished product + shell
4:Finished product + shell+ earphone
Note
Do not touch the back components of the module when working, so as not to affect the normal operation of the module or cause a short circuit to burn the module.
This module is a radio sensitive device. Interference from the power supply or nearby may affect the normal operation of the module.
Therefore, it is recommended to use a battery or a power frequency transformer to obtain a stable voltage obtained by stabilizing the power supply for the module. Cannot use switching power supply
(Such as mobile phone chargers, and any other switching power supplies), power banks, and no working Class D amplifiers, microwave ovens and other equipment are nearby.
Otherwise, the interference generated by these devices will affect the receiving effect of this module. Those who buy the module and develop it by themselves, please pay attention.
Instructions for use
After each module is completed, the channel will be searched automatically first. Long press ‘Auto Search (AUTO key)’ to start automatic search and store the radio stations that can be listened to,
After the search is completed, the first station P01 will be played automatically. The user can press the ‘previous station’ or ‘next station’ button to switch the searched station.
This module can set the backlight state and whether to listen to the campus broadcast frequency band according to the user’s specific usage. The setting method is as follows.
When the power is off, press and hold the VOL+, VOL- button and power on the LCD display C1 to turn on the campus broadcast C0 to turn off the campus broadcast band, and the settings will take effect after restarting.
To set the backlight state, press and hold the up and down radio buttons at the same time when the power is off. B1 indicates that the backlight is always on, and B0 indicates that the backlight is turned off for 20 seconds. The settings will take effect after restarting. Change the setting status and repeat this step to switch. The factory unified setting is not to turn on the campus broadcast frequency band, and the backlight goes out for 20 seconds without operation.
Pakage included
1 x PCB board
1 x Audio stand
6 x 6*6*14 button
1 x USB MICOR socket (fixed feet are plug-ins)
1 x 12D07 side switch
2 x TP4054
3 x 104 monolithic capacitor
2 x 10K resistor
1 x 510 ohm resistor
1 x 3MM LED white hair blue
1 x Radio module
Weight | 0.069 kg |
---|
Customers Also Viewed
300W Digital Amplifier Speaker Protection Board 2.1 Channel Relay Speaker Protection Module Boot Delay DC Protection
$15.30Relay ModuleAdd to cartFeatures1.With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)2. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,3. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.4. Since the input end of the optocoupler belongs …
AB18 2SA1943/2SC5200 High Power 300W + 300W Dual Channel Class A/B Power Amplifier Board for Sound Speaker DIY
$125.17Amplifier BoardAdd to cartProduct description1. Using Japan imported original brand new 2SA1943/2SC52002. Electrolytic capacitor adopts imported electrolysis to ensure strong continuous power support.3. The resistor uses high-precision resistors, and the main circuit uses high-precision resistors with an accuracy of ÷ 1% to ensure a good signal-to-noise ratio for the whole machine.4. The PCB adopts 1.6mm thick double-sided sheet, …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart Home
$28.82Smart ModuleAdd to cartDescriptionThe core processor of DMP-L1 module adopts industrial chip ESP8285. The chip integrates an enhanced version of the Tensilica’s L106 Diamond Series 32-bit core processor in smaller size packages. ESP8285 has a complete Wi-Fi network function, which can be used independently from the controller. Its built-in cache memory greatly provides CPU performance.DMP-L1 module supports standard …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart HomeRead More
Wareshare 5.5 inch AMOLED HDMI Display Capacitive Touch Screen with Tempered Glass Support for NVIDIA Jetson Nano Raspberry Pi
$229.66Display ScreenAdd to cartDocumentsManual:Click here to openDatasheet:Click here to openSoftwarePanasoni SDFormatterWin32DiskImagerPuTTYOverviewThis product is a universal 5.5-inch HDMI display with 1080≠1920 ultra-clear resolution and a capacitive touch panel. Support for Raspberry Pi and various mini PCs, also as a computer monitor.Features5.5inch AMOLED, 1080×1920 resolution.Toughened glass capacitive touch panel.Supports popular mini PCs such as Raspberry Pi, as well as general …
5pcs 20x20x15mm DIY CPU IC Chip Heat Sink Extruded Cooler Aluminum Heat Sink
$4.36Electronic Accessories & SuppliesAdd to cartFeatureAluminum heat sinks for electronics, computers, electrical facilities, play a cooling effectSpecificationMaterials:AluminumSize:20*20*15mm (L*W*H)Color:SilverQty:5pcsPackage includes5 x CPU IC Chip Aluminum Heat Sink
5Pcs Yellow Backlight 1602 Character LCD Display Module
$24.89Display ScreenAdd to cartDescriptionLCD display module with yellow backlightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in:copiers, fax machines, laser printers, industrial test equipment,networking equipment such as routers and storage devicesLCM type:CharactersCan display 2-lines X 16-charactersOperate with 5V DCModule dimension:80mm x 36mm x 12mmViewing area size:64.5mm x 16mmPackage included5 X LCD display module
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack Stand
$106.76FoamAdd to cartSpecificationMaterial:BambooColor:WoodSize:(L)X(W)X(H)105X22X4cm/41.34inchX8.66inchX1.57inch(appr.)Features1. Constructed from durable bamboo and metal supporting frame in excellent craftsmanship for many years use.2. Varnish processing on surface, lightweight and easy to operate.3. Books can be held with metal rack stably for reading when bathing.4. Books, phone, towl, and food can be placed on it for convenient reach.5. Its length is adjustable between …
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack StandRead More
Reviews
There are no reviews yet.