DIY Electronic Kit Rechargeable FM Stereo Digital Radio DIY Parts
$23.52
Style #1 / Style #2 / Style #3 / Style #4 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Use advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation technology (PLL) to make the sound quality more realistic, the performance more stable, and the long-term working frequency has no deviation
The reception signal is good, 22 stations can be received locally.
2. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference.
3. It has the functions of automatic search and storage of radio stations, easy to operate and use.
4. Built-in 30-level digital volume adjustment, key operation can be easily completed.
5.Automatically memorize the data before the power failure.
6.Using quartz crystal for frequency stabilization, the emission frequency will no longer drift when the temperature changes.
7. Full frequency band (76-108MHZ) automatically search for signal frequency band and store memory.
8.Built-in rechargeable lithium battery and charging circuit, it can be charged with a mobile phone charger, the blue light is on when charging, and the light is off when it is full.
Specification
PCB board size:7.1CM*3.6CM
Shell size:8.2CM*4.9CM*2.0CM
Support headset:in-ear headset
Output power:500mW (drive earphone)
Frequency response range:50Hz-18KHz
Channel:stereo
Receiving frequency adjustment range
Turn off campus radio 87.0MHz-108.0MHz, turn on campus radio 76.0MHz-108.0MHz
Equivalent noise:◎30dB
Supply voltage:3.0V-5.0V
Current:40mA
Battery size:5x20x30 (thickness X width X length)
Package battery capacity:250MAH, it can be used for about 4-5 hours when fully charged.
Style:1:Parts + shell 2:Parts + shell + earphone 3:Finished product + shell
4:Finished product + shell+ earphone
Note
Do not touch the back components of the module when working, so as not to affect the normal operation of the module or cause a short circuit to burn the module.
This module is a radio sensitive device. Interference from the power supply or nearby may affect the normal operation of the module.
Therefore, it is recommended to use a battery or a power frequency transformer to obtain a stable voltage obtained by stabilizing the power supply for the module. Cannot use switching power supply
(Such as mobile phone chargers, and any other switching power supplies), power banks, and no working Class D amplifiers, microwave ovens and other equipment are nearby.
Otherwise, the interference generated by these devices will affect the receiving effect of this module. Those who buy the module and develop it by themselves, please pay attention.
Instructions for use
After each module is completed, the channel will be searched automatically first. Long press ‘Auto Search (AUTO key)’ to start automatic search and store the radio stations that can be listened to,
After the search is completed, the first station P01 will be played automatically. The user can press the ‘previous station’ or ‘next station’ button to switch the searched station.
This module can set the backlight state and whether to listen to the campus broadcast frequency band according to the user’s specific usage. The setting method is as follows.
When the power is off, press and hold the VOL+, VOL- button and power on the LCD display C1 to turn on the campus broadcast C0 to turn off the campus broadcast band, and the settings will take effect after restarting.
To set the backlight state, press and hold the up and down radio buttons at the same time when the power is off. B1 indicates that the backlight is always on, and B0 indicates that the backlight is turned off for 20 seconds. The settings will take effect after restarting. Change the setting status and repeat this step to switch. The factory unified setting is not to turn on the campus broadcast frequency band, and the backlight goes out for 20 seconds without operation.
Pakage included
1 x PCB board
1 x Audio stand
6 x 6*6*14 button
1 x USB MICOR socket (fixed feet are plug-ins)
1 x 12D07 side switch
2 x TP4054
3 x 104 monolithic capacitor
2 x 10K resistor
1 x 510 ohm resistor
1 x 3MM LED white hair blue
1 x Radio module
Weight | 0.069 kg |
---|
Customers Also Viewed
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire Connectors
$70.86ConnectorsAdd to cartSpecificationModel:SC6-6~SC35-10Material:Tin Plated CopperColor:SilverSize:6mm²/10mm²/16mm²/25mm²/35mm²Mount Hole:6 mm/8 mm/10 mmBox Size(L*W*H):280 x 126 x 14 mmQuantity:100 PcsFeaturesElectro-plated tin exterior.Premium quality copper material, environmentally friendly, safe for using.These tube lugs have a bell shaped end allowing for easy insertion of the cable.Acceptable working temperature is -55℃ to 100℃ and are suitable for applications in the Australian Climate.Copper lugs are …
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire ConnectorsRead More
TDA7377 Subwoofer Amplifier Audio Board 38Wx3 Mini Home Amp 2.1 Channel HiFi Stereo Power Amplifier DIY
$21.86Amplifier BoardAdd to cartDescriptionThe power amplifier board uses 7377 amplifier chip, dual circuit design, optional DC12V / AC12V power supply, and uses 2.1 three-channel output. Available for Bluetooth / Wireless Microphone / Fan. Separate design, easy installation, provides volume and subwoofer adjustment. ParametersWorking voltage:DC12V / AC12V Chip:TDA7377 Op amp:LT084 / 324 Working voltage:DC12V / AC12V Output power:38Wx3 Channel …
XH-W1411 220V 10A Smart Electronics LED Digital thermometer Temperature Controller Switch Module
$17.48Test & Measuring ModuleAdd to cartSpecificationsTemperature range:-55- + 120→Temperature measurement accuracy:± 0.3→Resolution:0.1→Temperature range:-19 ~ 99→Control accuracy:1→Temperature probe:NTC10K / B3950 comes standard with 1 meter waterproof probeSupply voltage:220VTemperature:-25 ~ 55→ Humidity 20% -85% (non-condensing)Output Type:10A relay outputsSize:90*60mm/3.54 Inch*2.36 InchHole size:70*50mm/2.76 Inch*1.96 InchFeatures– The board and plastic panels fixed column compartment and lock nut– Connect the power supply according to the drawings …
3Pcs HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
$24.99DIY Electronic KitsAdd to cartDescriptionIt is DIY Kit, must be assemble to work. User need technical operation ability.Package included3 x HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpa
$60.74Carbon FiberAdd to cartSpecificationSize;100 x 100cmWidth; 0.25mmMaterial:Carbon fiberCompressive strength:3900 mpaFeaturesa.Uniform texture, without color. Weaving skills, good gloss.b.Mainly used in aircraft main, tail and body; automotive engine synchronizer, hood, bumpers, decorative pieces; bike frame, wheels, leading; racket, cone; kayaking, snowboarding; various models, helmets , watches, pens, bags.Main purpose1. Aerospace:fuselage, rudder, rocket engine shells, missiles casual flow, such as solar …
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpaRead More
3pcs EQKIT 60 Seconds Electronic Timer Kit DIY Parts Soldering Practice Board
$28.54DIY Electronic KitsAdd to cartInstruction:http://img.staticbg.com/file/products/20180726215941ETI-60-timer-kit.pdfFeatureOperating voltage:DC5VStandby current:≤8mAWorking current:≤10mACountdown:60 secondsCountdown ends prompt:three alarmsSoludering difficulty:GeneralBoard size:84 x 84mmNote:Electronic production kit, require buyer soldering assembly.Package included3 x Electronic Timer K
Reviews
There are no reviews yet.