4-20mA LCD Digital Signal Generator Module DC 12V 24V for Signal Sources Valve Adjustment Analog Transmitter Module
$25.95
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Easy to use and connect the wire, good performance.
2.Knob operation, immediately after adjusting the response output, no delay.
3.The power port has polarity protection, will not damage the components with power reverse.
4.Power supply voltage:DC 12V or 24V(tolerance ÷25%), total power
5.Output load impedance range:0-350 ohms(DC12V); 0-800 ohms(DC 24V).
6.The test output is normal, you can use a multimeter shorted ‘4-20mA output’ terminal.
7.Can be used for signal sources, valve adjustment, output meter test, the light emitting diode test, analog transmitter.
Specifications
Power Supply:DC 12V or 24V
Current:4-20mA
Total Power
Output Load Impedance:0-350 ohms(DC12V); 0-800 ohms(DC 24V)
PCB Board Size:50 * 50mm / 1.97 * 1.97in
Product Weight:38g / 1.37oz
Package Included
1 x Signal Generator Module
Weight | 0.042 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.