XY-DJ01 DC6-30V 30A 1CH Digital Display Relay Module Delayed Power off Trigger Delay Cycle Timing Circuit Switch Rail Type
$26.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low level trigger, switch value control, support NPN, PNP sensor access, suitable for most occasions;
3. Wide voltage supply (6~30V),Rail installation, very convenient to use;
4. There is a key pausing function, with reverse connection protection, reverse connection does not burn;
5. Added sleep mode. After enabling, without any operation for about 5 minutes, the LCD backlight will be automatically turned off; any key to wake up;
6. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
7. All set parameters are automatically saved after power-off.
Operating mode
P0:After the signal is triggered, the relay is turned on for OP time, and then off; within the OP time, the signal is triggered again invalid
P1:After the signal is triggered, the relay is turned on for OP time and then off; within the OP time, the signal is triggered again to re-timing
P2:After the signal is triggered, the relay is turned on for OP time and then turned off; within the OP time, the signal triggers reset again, the relay is turned off, and the timing stops
P3:After the signal is triggered, the relay is turned off for CL time, and then the relay is turned on;
P4:After the trigger signal is given, the relay is turned on for OP time, the relay is disconnected for CL time, and then the above actions are cycled, the signal is given again in the cycle, the initial state is restored, and the timing is stopped; the number of cycles (LOP) can be set; the cycle ends, keep the relay off ;
P5:Give the trigger signal, after the relay is disconnected from the CL time, the relay will be turned on for OP time, and then cycle the above actions, give the signal again in the cycle, restore the initial state, and stop timing; the number of cycles (LOP) can be set; the cycle ends, keep the relay on ;
P6:After power-on, no trigger signal is needed, the relay is on for OP time, the relay is off for CL time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle is over, keep the relay off;
P7:There is no need to trigger signal after power-on, the relay is off CL time, the relay is on OP time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle ends and the relay is kept on;
P8:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains on; when the signal disappears, the relay is disconnected after timing OP; during the timing, there is a signal again, and the timer is clear;
P9:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains off; when the signal disappears, the relay is turned on after timing CL; during the timing, there is another signal, and the timer is cleared;
(P0~P7) mode, short press the pausing button, when the system does not trigger the timing, the system starts timing; when the system is already timing, the system pauses timing, the relay is disconnected, and flashes ‘OUT’ as a reminder;
In P8 P9 mode, the pausing button on the running interface is used as the trigger signal, and its button function is disabled by short press/long press;
Product parameter
Working voltage:6-30V power supply
Trigger signal source:high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch).
Output capacity:can control equipment within DC 30v 30A or AC 220v 30A
Quiescent current:15mA
Working current:50-130mA
Service life:more than 100,000 times;
Working temperature:-40-85→;
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Timing range
0.01 second (minimum) ~ 9999 minutes (maximum) continuously adjustable
How to choose the timing range
In the OP/CL parameter modification interface, short press the pausing button to select the timing range;
XXXX No decimal point, timing range 1 second~9999 seconds
XXX.X The decimal point is in the tenth place, and the timing range is 0.1 seconds to 999.9 seconds
XX.XX The decimal point is in hundreds, and the timing range 0.01 seconds to 99.99 seconds
X.X.X.X All decimal points are lit, timing range 1 minute to 9999 minutes
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the tens place, and the LCD will display 003.2
Parameter description:OP on time, CL off time, LOP cycle times (1-9999 times, ‘—-‘ represents infinite cycles)
parameter settings
a) Enter the setting interface by long pressing the setting button;
b) First set the work mode, the work mode flashes to remind, short press the increase/decrease button to set the work mode;
c) Short press the setting button, select the working mode, and enter the system parameter setting;
d) In the system parameter setting interface, short press the setting button to switch the system parameter to be modified, and short press/long press the increase/decrease button to modify;
(Note:Short press the setting button is invalid in P0~P3/P8/P9 mode);
e) In the OP/CL parameter modification interface, short press the pausing button to switch the timing unit (1s/0.1s/0.01s/1min)
f) After setting all parameters, long press the setting button to save the parameter setting and exit the setting interface;
Additional functions
a)Automatic sleep function:In the running interface (P0~P7 mode), long press the pausing button to start or close the automatic sleep function (LP selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off , The system is running normally, any key is pressed to wake up; off is to close the sleep function);
b) Parameter view:In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;
c) Display content switching:In P4 ~ P7 mode, short press the DOWN key to switch the display content (operating time/cycle times);
Package included
1 x Relay Module Switch
Weight | 0.03 kg |
---|
Customers Also Viewed
PLZ 35-4400MHz Simple Spectrum Sweep Frequency Signal Source Power Meter CNC Aluminum Alloy Case
$116.99RF amplifierAdd to cartFeatures1. Signanl generator and spectrum analyzer frequency range:35M-4.4G2. MIN step:1K3. Output power(reference):0dBm@1G4. Frequency accuary(calibration):+-0.1k@1GHz5. Spectrum analyzer max liner input power:-10dBm6. Spectrum analyzer not damage input power:+10dBm7. MiniUSB power:+5V/0.3A8. Interface:USB, SMA@50┯9. Size(L*W*H):88*59*13mm10. Weight:140g11. Support XP/WIN7/WIN10 systemsPackage included1 x Spectrum analyzer 1 x USB cable
3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42Power Supply ModuleAdd to cartSpecificationModule name:400W boost constant current moduleModule nature:non-isolated boost module (BOOST)Input voltage:DC8.5V-50VInput current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipationStatic working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)Output voltage:10-60V continuously adjustable (suitable for applications where the input …
2Pcs 65*27mm Orange+Transparent Color Rubber Wheels for TT Motor Smart Chassis Car
$8.45Smart Robot & Solar PanelAdd to cartSpecifications– Diameter:65mm– Width:27mm– Centre hole:5.3 x 3.66mm (two sides is semicircle)– Material:Rubber(TPE)– Weight:about 50g– Color:Orange– For:TT motor/Smart Chassis Car DIY Part– Quantity:2PcsPackage Included2 x Orange Wheels
100 pcs DC 5V 5mW 650nm 6mm Laser Dot Diode Module Red Copper Head Tube
$44.86Other Module BoardAdd to cartFeaturesWorking life:more than 2000 hoursSpot mode:dot facula, continuous outputLaser wavelength:650nm (red)Copper head diameter:6mmLight powerSupply voltage:5V DCOperating currentOperating temperature:-36→ ~ 65→Power lead length:120mmShell material:brassSingle weight:1gPackage included100 x Laser diode dot
5pcs FXD-82B 12V Battery indicator Board Module Load 4 Digit Electricity indication with LED Lamp
$16.89Other Module BoardAdd to cartSpecificationsOn-board high-precision voltage detection chip and power supply voltage regulator chip onboard 4 power indicator LED lamp, divided into 3 colors display, red, yellow, yellow, green represents 20%, 50%, 80%, 100 (%) of the electricity Three Reserve a battery test interface and two mounting holes on-board high-precision voltage detection chip and power supply voltage regulator …
8FT 2.4m Strong Nylon Mesh Fishing Net Bait Easy Throw Hand Casting 3/4 w/ Sinker
$113.39Mesh & Wire ClothAdd to cartSpecificationName:Fishing NetMaterial:Nylon+GalvanizedColor:brownDiameter:2.4mFeatures1. Strong and durable material.2. Easy to use.3. Help you get more fish.Package Included1 x Fishing Net
1500 Pcs 2pF-0.1F Ceramic Capacitors Kit 30 Types with Component Box
$47.10Electronic Accessories & SuppliesAdd to cartFeatureCapacity:2pF-0.1μFCapacity:Quantity:Capacity:Quantity:Capacity:Quantity2pF:10:75pF:10:2200pF (2.2nF 222):103pF:10:82pF:10:3300pF (3.3nF 332):105pF:10:100pF (101):10:4700pF (4.7nF 472):1010pF:10:150pF (151):10:6800pF (6.8nF 682):1015pF:10:220pF (221):10:10nF (103):1022pF:10:330pF (331):10:15nF (153):1030pF:10:470pF (471):10:22nF (223):1033pF:10:680pF (681):10:47nF (473):1047pF:10:1000pF (1nF 102):10:68nF (683):1068pF:10:1500pF (1.5nF 152):10:100nF (0.1uF 104):10Package includes1500 x Ceramic Capacitors5 x Component Box
3pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$11.02Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
Reviews
There are no reviews yet.