3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
Product parameters
1:Operating voltage:6–30V, support microUSB 5.0V power supply
2:Trigger Source:Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
3:Output capability:You can control the DC 30VDC 5A or 220VAC 5A device.
4:Quiescent Current:20mA; Operating Current:50mA
5:Life:more than 10 million times; Working temperature:-40→-85 →; Size:6.2*3.8*1.7cm.
6:With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note:The relay outputs are passive contact, just a switch.
Operating mode
P1:trigger signal, the relay is on ‘OP’ time, and then disconnect; in the ‘OP’ time, as follows
P1.1:signal is triggered again, invalid
P1.2:signal is triggered again, the clock is reset
P1.3:Signal trigger again, relay off, stop the clock;
P-2:trigger signal, the relay off ‘CL’ of time, the relay on ‘OP’ time, and then disconnect relay;
P3.1:trigger signal, the relay is turned on after the ‘OP’ time, the relay off ‘CL’ time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ‘LOP ‘) can be set.
P3.2:without triggering signal, the relay is on ‘OP’ time, the relay off ‘CL’ time, and has been cycling; frequency ( ‘LOP’) cycle can be set;
P-4:signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ‘OP’ time, the relay is; if another signal during timing, timing is cleared.
Timing range
0.1 seconds (min) to 999 minutes (max) continuously adjustable
How to choose the time range
After setting the mode selection screen parameter value by a short press ‘STOP’ button to select the time range;
XXX. decimal point in the unit place, time range:1 second to 999 seconds.
XX. X decimal point in decade place, Timing range:0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range:1 minute to 999 minutes.
For example, you want to set ‘OP’ is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:’OP’ – conduction time, ‘CL’ – off time, ‘LOP’ – the number of cycles (1-999 times, ‘—‘ represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time ‘OP’ is 5 seconds, if you switch to P1.2 mode, it’s ‘OP’ will be 5 seconds too.
In the main interface (display 000), short press ‘SET’ button will display ‘OP’ ( ‘CL’, ‘LOP’) and the corresponding time XXX;
Some parameters only mode ‘OP’ (such as the mode P1.1, P1.2, P1.3), short press the ‘SET’ key to display only the “OP” and the corresponding time;
Some models have parameters ‘OP’,’CL’, ‘LOP’ (such as the mode P3.1, P3.2), short press ‘SET’ button will display ‘OP’ and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press ‘SET’ key to see information about the parameters of the current mode, very convenient!
How to set parameters
1. First, read the instructions to determine the required operating mode.
2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press ‘SET’ button for 2 seconds after release to enter mode selection interface; a short time by pressing ‘UP’, ‘DOWN’ key to select the mode (P1.1 ~ P-4).
3. Select the mode (such as P3.2), short press the ‘SET’ button, then the parameter to be set flashes ( ‘OP’on-time, ‘CL’ off time, ‘LOP’ cycles ( ‘—‘ represents infinite loop)), by ‘UP’, ‘DOWN’ keys to adjust the parameter value, support long press (rapid increase or decrease) and short press (increase or decrease one unit); then short press the ‘STOP’ key to select the decimal point position, select the time range (0.1 seconds to 999 minutes); short press the ‘SET’ button to set the next parameters of the current mode of procedure is as above.
4. After the parameters are set, long press ‘SET’ button for 2 seconds then release, the name of the current mode will flash once, and then return to the main screen, set the parameters of success!
The main interface:In the relay does not work status display ‘000’ (no decimal point), with a decimal point under relay state.
Mode selection screen:Long press the ‘SET’ key to enter, after setting is completed, long press the ‘SET’ key to exit back to the main screen.
‘STOP’ button extensions
Relays enable mode
1. ON:Relay allows conduction in the ‘OP’ on-time;
2. OFF:relay prohibit conduction is always closed;
In the main interface, short press the ‘STOP’ button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay)
Sleep mode
1. ‘C-P’ Sleep mode:five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. ‘O-d’ normal mode:digital display always open;
Press the ‘STOP’ button for two seconds and then release to switch ‘C-P’ and ‘O-d’ state, in which the current state of flashes and then return to the main screen.
Package Included
3 x DC 1 Channel Time Delay Relay Module
3 x Shell Case
Weight | 0.222 kg |
---|
Customers Also Viewed
3Pcs NodeMcu Lua WIFI internet Things Development Board Based ESP8266 CP2102 Wireless Module
$33.62Smart ModuleAdd to cartDescriptionMaterial:Experimental Board + Mixed AlloyColor:BlackChip Module:CP2102Working Temperature:-40 → ~ +125 →Power Input:4.5V ~ 9V (10VMAX), USB-poweredDrive Type:Dual high-power H-bridge driverCurrent:continuous transmission ≈70mA (200mA MAX)StandbySize:(L)X(W)4.8X2.5cm/1.89inchX0.98inch(appr.)FeaturesA great set of tools to develop ESP8266.ESP8266 has IO Pin.ESP8266 full IO mouth leads directly download without resetting.Open-source, interactive, programmable, low cost, simple, smart, WI-FI enabled.Greatly speed up your IOT application …
3pcs 500W Thyristor Electronic Regulator Accessaries Dimming Speed Regulation with Switch Temperature Adjustment Knob Module
$13.41Motor PWM Speed ControllerAdd to cartSpecificationsPCB board size:3.2CM*3.3CMRated power:P=UI; 500W=220V*2.27AModel:500W dimming governor;Rated power:500W;Suitable for dimming speed control of AC motors, lamps, etc. above 100W and below 500W;NoteThis module is connected to the AC voltage of 220V, so be sure to pay attention to safety when debugging, to prevent the occurrence of electric shock accidents, the store is not responsible for …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree Protractor
$42.51Laboratory Thermostatic DevicesAdd to cartSpecificationsMaterial:Stainless Steel + PlasticSize Range:0-300mmMeasuring Range:0-360°Resolution:0.05°Accuracy:±0.3°Repeatability:0.05°Battery:1 * 3V CR2032 Lithium Battery (Built-in)Features ACCURATE & Fast:Calculating angles quickly and accurately, digital display clearly TWO SCALE DISPLAY:Both measure the angle and length, metric and imperial scale 360° MEASUREMENT RANGE:Stable locking function can lock the measurement at any angle INTELLIGENT & SAVE POWER:Automatically shut down after 6 minutes …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree ProtractorRead More
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering Kit
$43.73DIY Electronic KitsAdd to cartDescriptionCircuit board size:7.7CMX6.1CM;Shell size:8.4cm*7.6CM*5.5CMWorking voltage:DC 5V (positive inside DC seat)Frequency modulation range:87MHZ-108MHZ;FM button:press the button once to 0.1MHZ, long press the FM button to continuously add and subtract;Weight:265GFunction:digital display frequency function, power off memory function, power saving function;Power-off memory function:After turning off the power, power on again to play the radio station before the power-off.Power …
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering KitRead More
LILYGO TTGO T-Watch Sensor Development Kit STEM Programming Educational Sensor Module Multiple Function Sensor
$216.66Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.More informationhttps://t-watch-document-en.readthedocs.io/en/latest/introduction/index.htmlhttps://github.com/Xinyuan-LilyGO/TTGO_TWatch_LibraryHardware SpecificationsChipset:ESP32, dual-core MCU, PMU power managementFLASH:QSPI flash 16MB / PSRAM 8MBSRAM:520 kB SRAMButton:power key, IO36Extended function:Reference enhanced version and sensor kitUSB to TTL:CP2104Modular interface:UART, SPI, SDIO, I2C, LED PWM, PWM, …
CCM5D DC 6V-30V 6A DC Motor Speed Controller LED Display PWM Variable Speed Regulator with Shell
$17.48Motor PWM Speed ControllerAdd to cartFeatures• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). • Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.• The display range of 3-digit LED display is “000 Inch-“100 Inch. ( For example, displayed “60 Inch, it means that the PWM output …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle Glassware
$73.55Laboratory BottleAdd to cartDescriptionTransparent Detachable Pipe Bottle for Eliminating Unwanted Odors and HarmSpecificationColor:ClearJoint Diameter:14 mmHeight:355 mm/14inchMaterial:High Borosilicate GlassFeatures1. Convenient to carry.2. Attractive appearance.3. Reusable and easy to clean.4. Help eliminate unwanted odors from your finger tips.5. Made from borosilicate glass for the smoking experience.6. Allow you to enjoy the full flavor of your smoke while reducing the tar …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle GlasswareRead More
Reviews
There are no reviews yet.