3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
Product parameters
1:Operating voltage:6–30V, support microUSB 5.0V power supply
2:Trigger Source:Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
3:Output capability:You can control the DC 30VDC 5A or 220VAC 5A device.
4:Quiescent Current:20mA; Operating Current:50mA
5:Life:more than 10 million times; Working temperature:-40→-85 →; Size:6.2*3.8*1.7cm.
6:With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note:The relay outputs are passive contact, just a switch.
Operating mode
P1:trigger signal, the relay is on ‘OP’ time, and then disconnect; in the ‘OP’ time, as follows
P1.1:signal is triggered again, invalid
P1.2:signal is triggered again, the clock is reset
P1.3:Signal trigger again, relay off, stop the clock;
P-2:trigger signal, the relay off ‘CL’ of time, the relay on ‘OP’ time, and then disconnect relay;
P3.1:trigger signal, the relay is turned on after the ‘OP’ time, the relay off ‘CL’ time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ‘LOP ‘) can be set.
P3.2:without triggering signal, the relay is on ‘OP’ time, the relay off ‘CL’ time, and has been cycling; frequency ( ‘LOP’) cycle can be set;
P-4:signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ‘OP’ time, the relay is; if another signal during timing, timing is cleared.
Timing range
0.1 seconds (min) to 999 minutes (max) continuously adjustable
How to choose the time range
After setting the mode selection screen parameter value by a short press ‘STOP’ button to select the time range;
XXX. decimal point in the unit place, time range:1 second to 999 seconds.
XX. X decimal point in decade place, Timing range:0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range:1 minute to 999 minutes.
For example, you want to set ‘OP’ is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:’OP’ – conduction time, ‘CL’ – off time, ‘LOP’ – the number of cycles (1-999 times, ‘—‘ represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time ‘OP’ is 5 seconds, if you switch to P1.2 mode, it’s ‘OP’ will be 5 seconds too.
In the main interface (display 000), short press ‘SET’ button will display ‘OP’ ( ‘CL’, ‘LOP’) and the corresponding time XXX;
Some parameters only mode ‘OP’ (such as the mode P1.1, P1.2, P1.3), short press the ‘SET’ key to display only the “OP” and the corresponding time;
Some models have parameters ‘OP’,’CL’, ‘LOP’ (such as the mode P3.1, P3.2), short press ‘SET’ button will display ‘OP’ and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press ‘SET’ key to see information about the parameters of the current mode, very convenient!
How to set parameters
1. First, read the instructions to determine the required operating mode.
2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press ‘SET’ button for 2 seconds after release to enter mode selection interface; a short time by pressing ‘UP’, ‘DOWN’ key to select the mode (P1.1 ~ P-4).
3. Select the mode (such as P3.2), short press the ‘SET’ button, then the parameter to be set flashes ( ‘OP’on-time, ‘CL’ off time, ‘LOP’ cycles ( ‘—‘ represents infinite loop)), by ‘UP’, ‘DOWN’ keys to adjust the parameter value, support long press (rapid increase or decrease) and short press (increase or decrease one unit); then short press the ‘STOP’ key to select the decimal point position, select the time range (0.1 seconds to 999 minutes); short press the ‘SET’ button to set the next parameters of the current mode of procedure is as above.
4. After the parameters are set, long press ‘SET’ button for 2 seconds then release, the name of the current mode will flash once, and then return to the main screen, set the parameters of success!
The main interface:In the relay does not work status display ‘000’ (no decimal point), with a decimal point under relay state.
Mode selection screen:Long press the ‘SET’ key to enter, after setting is completed, long press the ‘SET’ key to exit back to the main screen.
‘STOP’ button extensions
Relays enable mode
1. ON:Relay allows conduction in the ‘OP’ on-time;
2. OFF:relay prohibit conduction is always closed;
In the main interface, short press the ‘STOP’ button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay)
Sleep mode
1. ‘C-P’ Sleep mode:five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. ‘O-d’ normal mode:digital display always open;
Press the ‘STOP’ button for two seconds and then release to switch ‘C-P’ and ‘O-d’ state, in which the current state of flashes and then return to the main screen.
Package Included
3 x DC 1 Channel Time Delay Relay Module
3 x Shell Case
Weight | 0.222 kg |
---|
Customers Also Viewed
10Pcs Mesh Pot Net Basket Hydroponic Aeroponic Flower Container Plant Grow Pot Cup Planting Baskets
$16.19Lab Clamp & StandAdd to cartSpecification Material:Plastic Height:100mm Weigh:10gThe upper edge of the outer diamete:70mmThe outer diameter:63mmThe lower end of the outer diameter:54mmFeatures1.Good permeability:these net cups are designed with slotted mesh, can promote a more efficient plant growth through aeration.2.Growing by its own way:net pot with holes in the bottom, produce healthy roots with even drainage, which let the roots …
2Pcs Yellow Color Cute Pattern Silicone Protective Case for Micro:bit Expansion Board DIY Part
$19.02Smart Robot & Solar PanelAdd to cartFeatures1. Appearance and fun, make accessories safer2. Food Grade Safety Silicone Materials3. Protect Microbit from external wearSpecifications– Product Size:56*45mm– Thickness:12mm– Color:Yellow– Material:silica gel– Fit for:Micro:bit Expansion Board– Quantity:2Package Inlcuded2 x Yellow Micro:bit Silicone Protective Case (Not included the Micro:bit control board)
Hepa Filter Accessory for ELECTROLUX H13 Vacuum Cleaner
$22.26Switch AccessoriesAdd to cartHEPA H13 Filter for Most Modern ELECTROLUX Vacuum CleanerSpecificationsMaterial:PlasticFit For:Electrolux,Boldio,Excellio,Oxygen,Oxy3-Systems,Praxio,Powersystem,Smartvac,Ultra Silencer Series,FC8031 SeriesPackage Included1 x Filter
Wood Heating Stove Door Gasket Round Fiberglass Rope Seal High Density Fibreglass Strips Rope
$22.67FabricsFibers & TextilesAdd to cart2m 9.5mm High Density Fibreglass Rope Wood Fire Stove & Heater Door Seal 550°CSpecificationType:Fibreglass RopeColor:WhiteMaterial:FibreglassFire-resistant temperature:550 (°C)Tear strength:300Compressive strength:100Tensile strength:300Elongation at break:100Size:approx.9.5mm*2m(1cm=10mm=0.39inch)Measurement Details in the attached picture.Package Included1X Fibreglass RopeFeatureIt is tough, durable and strong yet flexible enough to make installation as a door seal easy.Our Fibreglass Rope has a maximum operating temperature of 550°C. …
100Pcs PCB DIY Soldering Copper Prototype Printed Circuit Board 70mm x 90mm
$104.88Electronic Accessories & SuppliesAdd to cartSpecificationMaterial:Single Side Copper PCB (Made of bakelite)Quantity:5PcsSize:70 x 90mm / 2.75 x 3.54inch(Approx. L*W)Thickness:1.5mm / 0.59inch(Approx)Hole pitch:2.54mm / 0.1inch(Approx)Diameter of Hole:1mm / 0.04inch(Approx)For DIY solderingEasy to installGreat for electronic accessoriesPackage includes100 x Circuit Board
10pcs KSD9700 250V 5A 45 Plastic thermostatic Temperature Sensor Switch NC
$9.96Sensor & Detector ModuleAdd to cartFeaturesKSD9700 product widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.SpecificationModel.No.:KSD9700Material:PlasticNet Weight:3gOptional:Normally Closed (NC)Rated Voltage:250VCurrent:5ACable Length (Approx.):7.3cm/ 2.9 inchHead Dimension (Approx.):21 x 7.5 x 3.6mm / 0.8 x 0.3 x 0.14 inch (L*W*T)Temperature:45→Package included10 x Temperature Control Switch
Electronics Component Super Kit with Jumper wires Color Led Resistors Register Card Buzzer for Arduino
$43.00DIY Electronic KitsAdd to cartFeatureElectronics component super kit perfect for anybody who use for Arduino, raspberry piPackage included1 x Project Box1 x Power Supply Module1 x 830 Holes Breadboard10 x Resistor(100┯)10 x Resistor(220┯)10 x Resistor(330┯)10 x Resistor(560┯)10 x Resistor(1k)10 x Resistor(2k)10 x Resistor(4.7k)10 x Resistor(10k)10 x Resistor(20k)10 x Resistor(51k)10 x Resistor(1M)10 x Resistor(10M)5 x 100uf Electrolytic Capacitors5 x 100nf …
Keyes NEO-7M GPS Module Satellite Positioning onboard Ceramic Antenna Serial Port Driver
$34.98Smart ModuleAdd to cartOverviewThis GPS module is based on the NEO-7M, can be used for satellite positioning. The module supports NMEA standard protocol output, built-in FLASH, and can save the setting information after power-off without external EEPROM. This module has an on-board ceramic antenna, which can easily locate the satellite in an open place without an external antenna. …
Keyes NEO-7M GPS Module Satellite Positioning onboard Ceramic Antenna Serial Port DriverRead More
Reviews
There are no reviews yet.