3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
Product parameters
1:Operating voltage:6–30V, support microUSB 5.0V power supply
2:Trigger Source:Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
3:Output capability:You can control the DC 30VDC 5A or 220VAC 5A device.
4:Quiescent Current:20mA; Operating Current:50mA
5:Life:more than 10 million times; Working temperature:-40→-85 →; Size:6.2*3.8*1.7cm.
6:With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note:The relay outputs are passive contact, just a switch.
Operating mode
P1:trigger signal, the relay is on ‘OP’ time, and then disconnect; in the ‘OP’ time, as follows
P1.1:signal is triggered again, invalid
P1.2:signal is triggered again, the clock is reset
P1.3:Signal trigger again, relay off, stop the clock;
P-2:trigger signal, the relay off ‘CL’ of time, the relay on ‘OP’ time, and then disconnect relay;
P3.1:trigger signal, the relay is turned on after the ‘OP’ time, the relay off ‘CL’ time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ‘LOP ‘) can be set.
P3.2:without triggering signal, the relay is on ‘OP’ time, the relay off ‘CL’ time, and has been cycling; frequency ( ‘LOP’) cycle can be set;
P-4:signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ‘OP’ time, the relay is; if another signal during timing, timing is cleared.
Timing range
0.1 seconds (min) to 999 minutes (max) continuously adjustable
How to choose the time range
After setting the mode selection screen parameter value by a short press ‘STOP’ button to select the time range;
XXX. decimal point in the unit place, time range:1 second to 999 seconds.
XX. X decimal point in decade place, Timing range:0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range:1 minute to 999 minutes.
For example, you want to set ‘OP’ is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:’OP’ – conduction time, ‘CL’ – off time, ‘LOP’ – the number of cycles (1-999 times, ‘—‘ represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time ‘OP’ is 5 seconds, if you switch to P1.2 mode, it’s ‘OP’ will be 5 seconds too.
In the main interface (display 000), short press ‘SET’ button will display ‘OP’ ( ‘CL’, ‘LOP’) and the corresponding time XXX;
Some parameters only mode ‘OP’ (such as the mode P1.1, P1.2, P1.3), short press the ‘SET’ key to display only the “OP” and the corresponding time;
Some models have parameters ‘OP’,’CL’, ‘LOP’ (such as the mode P3.1, P3.2), short press ‘SET’ button will display ‘OP’ and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press ‘SET’ key to see information about the parameters of the current mode, very convenient!
How to set parameters
1. First, read the instructions to determine the required operating mode.
2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press ‘SET’ button for 2 seconds after release to enter mode selection interface; a short time by pressing ‘UP’, ‘DOWN’ key to select the mode (P1.1 ~ P-4).
3. Select the mode (such as P3.2), short press the ‘SET’ button, then the parameter to be set flashes ( ‘OP’on-time, ‘CL’ off time, ‘LOP’ cycles ( ‘—‘ represents infinite loop)), by ‘UP’, ‘DOWN’ keys to adjust the parameter value, support long press (rapid increase or decrease) and short press (increase or decrease one unit); then short press the ‘STOP’ key to select the decimal point position, select the time range (0.1 seconds to 999 minutes); short press the ‘SET’ button to set the next parameters of the current mode of procedure is as above.
4. After the parameters are set, long press ‘SET’ button for 2 seconds then release, the name of the current mode will flash once, and then return to the main screen, set the parameters of success!
The main interface:In the relay does not work status display ‘000’ (no decimal point), with a decimal point under relay state.
Mode selection screen:Long press the ‘SET’ key to enter, after setting is completed, long press the ‘SET’ key to exit back to the main screen.
‘STOP’ button extensions
Relays enable mode
1. ON:Relay allows conduction in the ‘OP’ on-time;
2. OFF:relay prohibit conduction is always closed;
In the main interface, short press the ‘STOP’ button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay)
Sleep mode
1. ‘C-P’ Sleep mode:five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. ‘O-d’ normal mode:digital display always open;
Press the ‘STOP’ button for two seconds and then release to switch ‘C-P’ and ‘O-d’ state, in which the current state of flashes and then return to the main screen.
Package Included
3 x DC 1 Channel Time Delay Relay Module
3 x Shell Case
Weight | 0.222 kg |
---|
Customers Also Viewed
7L 2 Hole Plastic Fuel Oil Gasoline Tank Air Heater Diesel Car Caravan Motorhome
$56.69Solar CollectorsAdd to cartFeature1. Made of thick and durable plastic.2. 7L large capacity, suitable for for cars / truck air diesel parking heater.3. Fuel level can be noticed by the plastic box.4. Easy to use.Specifications1. Name:7L Fuel Oil Gasoline Tank2. Model:D303633. Color:White & Blue4. Capacity:7L5. Size:approx.39x22x8cm(HxWxD)6. Material:Plastic & MetalPackage Included1 x Fuel Oil Gasoline Tank1 x Screw Kit
3Pcs XKC-Y25-T12V Non-Contact Liquid Level Switch Stick Type Durable Level Sensor Module
$40.82Sensor & Detector ModuleAdd to cartParameterInput voltage:(InVCC) DC 5 ~ 24 VCurrent consumption:5mAOutput voltage(High level):InVCCOutput voltage (Low level):0VOutput current:1 ~ 50mAResponse time:500mSWorking temperature:0 ~ 100 degreeInduction thickness (Sensitivity) Range:0 ~ 20mmCommunication:RS485Humidity:5% to 100%Material:ABSWaterproof:IP67Package included3 x XKC-Y25-T12V Non-Contact Liquid Level Switch
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5V
$17.04Power Supply ModuleAdd to cart>>>Manual:Click here to openOverviewThe IB_LD-1W & IB_LS-1W series are specifically designed for power applications in distributed power systems on the board that require isolation from the input supply. This product is suitable for1) The input power supply voltage changes ≤ ± 5%;2) The isolation voltage between input and output is required to be ≤1000VDC;3) High …
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5VRead More
20pcs DC-DC 12V 3A Power Supply Module Buck Regulator Module 24V 18V To 12V Fixed Output Step Down
$43.40Power Supply ModuleAdd to cartSpecificationsInput voltage:14 – 26VOutput voltage:12VOutput current:3A (Max), the current should be controlled within 0.8A for working long hoursConversion efficiency:96% (Max)Output rippleOperating temperature:-40→ – 85→Dimension:22.3 x 17 x 4.2mm (L x W x H)Package included20 x DC-DC 12V 3A Power Supply Module
5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 Turn
$21.55Electronic Accessories & SuppliesAdd to cart5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 TurnDescription1. Color:As Pictures2. Resistance:10k ohm3. Resistance Tolerance:±5%.4. Power:2W5. Working Temperature:1→±125→6. Size:L x Dia / 40 x 20mm / 1.57 x 0.78inch7. Diameter of Shank:5mm/0.19inch8. Life Hour:1000 Hours9. Rotating Life:1,000,000 timesPackage include5 x Rotary Wirewound Precision Potentiometers
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instal
$9.18Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Installation steps1. Press and hold the corner of the acrylic on the left, and talk about installing the acrylic on the left to the acrylic on the back.2. Attach the acrylic film …
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instalRead More
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave Converter
$166.04InvertersAdd to cartFeatures– The inverter can convert DC12V to AC 110V.– Overload, over temperature, short circuit, low voltage, overvoltage protection.– Stable and precise output voltage.– Built-in cooling fan with low noise.– Comes with a car charger and a pair of alligator clip, convenient to use.– Perfect for TV, DVD player and other home appliances.SpecificationsColour BlackContinuous Output:3000 W …
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave ConverterRead More
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote Control
$139.71Solar PanelAdd to cartFeatures– 80 LEDs High-brightness 3030 LED lamp beads, energy saving, even light, longer lasting.– Polycrystalline Solar Panel convert solar energy into electricity, more environmentally friendly.– ABS one-piece housing, high hardness, sealed and waterproof– Easy installation, maintenance-free dependable operation without the need for wiring or trench. Rustproof, waterproof aluminum heavy duty casing. – Please turn on …
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote ControlRead More
Reviews
There are no reviews yet.