3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;
2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.
4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
6. After the module is powered down, all parameter settings are not lost.
Product parameters
1:Operating voltage:6–30V, support microUSB 5.0V power supply
2:Trigger Source:Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
3:Output capability:You can control the DC 30VDC 5A or 220VAC 5A device.
4:Quiescent Current:20mA; Operating Current:50mA
5:Life:more than 10 million times; Working temperature:-40→-85 →; Size:6.2*3.8*1.7cm.
6:With optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note:The relay outputs are passive contact, just a switch.
Operating mode
P1:trigger signal, the relay is on ‘OP’ time, and then disconnect; in the ‘OP’ time, as follows
P1.1:signal is triggered again, invalid
P1.2:signal is triggered again, the clock is reset
P1.3:Signal trigger again, relay off, stop the clock;
P-2:trigger signal, the relay off ‘CL’ of time, the relay on ‘OP’ time, and then disconnect relay;
P3.1:trigger signal, the relay is turned on after the ‘OP’ time, the relay off ‘CL’ time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ‘LOP ‘) can be set.
P3.2:without triggering signal, the relay is on ‘OP’ time, the relay off ‘CL’ time, and has been cycling; frequency ( ‘LOP’) cycle can be set;
P-4:signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ‘OP’ time, the relay is; if another signal during timing, timing is cleared.
Timing range
0.1 seconds (min) to 999 minutes (max) continuously adjustable
How to choose the time range
After setting the mode selection screen parameter value by a short press ‘STOP’ button to select the time range;
XXX. decimal point in the unit place, time range:1 second to 999 seconds.
XX. X decimal point in decade place, Timing range:0.1 seconds to 99.9 seconds
X. X. X. decimal full brightness, Timing range:1 minute to 999 minutes.
For example, you want to set ‘OP’ is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2
Parameter description:’OP’ – conduction time, ‘CL’ – off time, ‘LOP’ – the number of cycles (1-999 times, ‘—‘ represents infinite loop).
These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time ‘OP’ is 5 seconds, if you switch to P1.2 mode, it’s ‘OP’ will be 5 seconds too.
In the main interface (display 000), short press ‘SET’ button will display ‘OP’ ( ‘CL’, ‘LOP’) and the corresponding time XXX;
Some parameters only mode ‘OP’ (such as the mode P1.1, P1.2, P1.3), short press the ‘SET’ key to display only the “OP” and the corresponding time;
Some models have parameters ‘OP’,’CL’, ‘LOP’ (such as the mode P3.1, P3.2), short press ‘SET’ button will display ‘OP’ and the corresponding time, “CL” and the corresponding time, “LOP” and the corresponding number of times;
In the main interface by short press ‘SET’ key to see information about the parameters of the current mode, very convenient!
How to set parameters
1. First, read the instructions to determine the required operating mode.
2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press ‘SET’ button for 2 seconds after release to enter mode selection interface; a short time by pressing ‘UP’, ‘DOWN’ key to select the mode (P1.1 ~ P-4).
3. Select the mode (such as P3.2), short press the ‘SET’ button, then the parameter to be set flashes ( ‘OP’on-time, ‘CL’ off time, ‘LOP’ cycles ( ‘—‘ represents infinite loop)), by ‘UP’, ‘DOWN’ keys to adjust the parameter value, support long press (rapid increase or decrease) and short press (increase or decrease one unit); then short press the ‘STOP’ key to select the decimal point position, select the time range (0.1 seconds to 999 minutes); short press the ‘SET’ button to set the next parameters of the current mode of procedure is as above.
4. After the parameters are set, long press ‘SET’ button for 2 seconds then release, the name of the current mode will flash once, and then return to the main screen, set the parameters of success!
The main interface:In the relay does not work status display ‘000’ (no decimal point), with a decimal point under relay state.
Mode selection screen:Long press the ‘SET’ key to enter, after setting is completed, long press the ‘SET’ key to exit back to the main screen.
‘STOP’ button extensions
Relays enable mode
1. ON:Relay allows conduction in the ‘OP’ on-time;
2. OFF:relay prohibit conduction is always closed;
In the main interface, short press the ‘STOP’ button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay)
Sleep mode
1. ‘C-P’ Sleep mode:five minutes without any operation, the digital display automatically turns off, the program running as usual;
2. ‘O-d’ normal mode:digital display always open;
Press the ‘STOP’ button for two seconds and then release to switch ‘C-P’ and ‘O-d’ state, in which the current state of flashes and then return to the main screen.
Package Included
3 x DC 1 Channel Time Delay Relay Module
3 x Shell Case
Weight | 0.222 kg |
---|
Customers Also Viewed
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable Dryer
$147.81ConnectorsAdd to cartFruit Dehydrator 5 Layer Household Vegetable Herb Meat Drying Machine Snacks Small Food Dryer Good Package Air DryerTechnical SpecificationsModel:JZE-R2Color:PinkProduct:Food DehydratorVoltage:220VFrequency:50HzCapacity:5 LayersPower:245WMachine size:215*245*245mm/8.5*9.6*9.6inch ( Height 300mm/11.8inch after raising the shelf) Features and Benefits 5 Interchangeable & Height adjustable trays 35 degrees to 70 degrees, different ingredients, different temperatures, eight-speed adjustmen Transparent trays allow you to check …
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable DryerRead More
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module Kit
$22.46Smart ModuleAdd to cartDescriptionThis is 433Mhz RF transmitter with receiver kit for ARM MCU wirelessApplication environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote …
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module KitRead More
3pcs Voltage Frequency Converter 0-10V To 0-10KHz Conversion Module 0-10V to 0-10KHZ Frequency Module
$17.50Converter BoardAdd to cartOverviewThe voltage to frequency module LM331_V2F is a module that can generate different frequencies depending on the input voltage. It is capable of converting 0-10V voltage into a frequency pulse signal of 0-10KHz.Features1. Input voltage, output frequency signal.2. The output signal can be fine-tuned, and the potentiometer can be adjusted to calibrate the correspondence between …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable Organizer
$87.06Switch AccessoriesAdd to cartSpecificationName:4 PortsUSB 3.0 HubModel:XDUH-334Color:BlackMaterial:PlasticSize:69 *24* 60mminch / 2.71inch*0.94inch*2.36inchPower plug:EUplugRated voltage:100V-240VFeature-Support for Windows and Mac operating systems;-The line length is 75CM, which can extend the USB interface from the chassis to the desktop, so you can connect any USB device on the desktop.-Equipped with an external power connector to connect to the power supply-Readable data; rechargeable; …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable OrganizerRead More
Catda 8GB RAM Raspberry Pi 4B + Cover Box + Power Supply + 32/64GB Memory Card +Micro HDMI DIY Kit
$238.94Raspberry Pi & Orange PiAdd to cartCapacity 32G Plug US Plug / Capacity 64G Plug US Plug / Capacity 32G Plug EU Plug / Capacity 32G Plug UK Plug / Capacity 32G Plug AU Plug / Capacity 64G Plug EU Plug / Capacity 64G Plug UK Plug / Capacity 64G Plug AU Plug /
Car Speaker Amplifier bluetooth 4.1 Audio Receiver Module Modification Accessories Motherboard Stereo
$8.73Amplifier BoardAdd to cartFeatureSupport bluetooth 4.1, support automatic connection back, support WAV+APE+FLAC+MP3 lossless decoding, stereo output.Power Supply:3.7-5VSNR:90dBTHD+N:-70dBCrosstalk:-86dBDNR:91dBSupport:A2DP / AVCTP / AVDTP / AVRCP / HFPLOS:>15MInterface detailsUSB powered:Universal Micro USB 5V powered3.7-5V power supply pad:realize external 3.7-5V lithium battery power supply modificationLED indicator:Bluetooth mode blue light is always on3.5mm stereo audio interface:standard 3.5mm interface, output stereo, can be plugged …
Reviews
There are no reviews yet.