5pcs 3V/3.7V To 5V 1A Lithium Battery Step Up Module Board Mini Mobile Power Boost Charger Module with Undervoltage indication
$28.62
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Using high quality chips and expanding MOS tubes.
2. The output current is expanded to 1A, and the maximum output is 1.5A. The 2A Schottky diode is used to recharge the balance.
3. With the new scheme design, the circuit design does not require electrolytic capacitors and tantalum capacitors (the electrolytic capacitors have a short life and the tantalum capacitors are in danger of explosion). 3 ceramic capacitors (MCC) used in high-end circuits.
4. The same load indicator and undervoltage indication (when the battery voltage is less than 2.7V, the indicator will go out under load, when the battery voltage is greater than 2.7V with load, the indicator light is on, when there is no load, the indicator light is micro bright).
5. Ultra-small size, 14.1*18.8*5.5 mm.
6. The circuit conversion efficiency is high, the efficiency is higher than 90%, and the efficiency of the single-cell lithium battery is also less than 80%.
7. Input low power reverse connection protection. If your battery has 2A protection board, the protection board will protect when you input the positive and negative poles of the power supply. Note that when there is no protection board or the input current is greater than 2A, the input reverse connection protection Will fail, will cause the module to be damaged, remember.
8. Ultra-low quiescent current, new version, quiescent current will be less than 100 microamps. No connection is required to connect to the battery.
Specifications
Input voltage:1-5V
Output voltage:5.1-5.2V
Output current:rated 1A-1.5A (single-cell lithium battery input), maximum 1.5A (single-cell lithium battery input)
Conversion efficiency:up to 96% (the higher the input voltage, the higher the efficiency)
Switching frequency:500KHz
Output ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
Undervoltage indication:LED with load LED is on (input voltage is lower than 2.7V LED is off)
Operating temperature:industrial grade (-40 ° C to +85 ° C)
Full load temperature rise:30 ° C
Quiescent current:130uA
Load adjustment rate:±1%
Voltage regulation rate:±0.5%
Dynamic response speed:5% 200uS
Short circuit protection:None, if you want to have short circuit protection, you can input the lithium battery protection board or use a protected lithium battery.
Input reverse connection protection:none
Wiring method:welding
Input mode:IN+ input positive, IN- input negative
Applications
1).DIY a mobile power supply, you only need to input a battery power input, you can output 5V voltage to charge your mobile phone, MP3, MP4, PSP, very simple and convenient.
2). Power your electronic equipment. When your equipment needs 5V power supply, but now you only have lithium battery power supply, use this module to directly boost to 5V, solve your troubles.
3). The system is powered by the front stage. When you input the battery (1-5V) when you are working on a project, and your system board needs 5V stable power, then you choose this module will be your most. Good choice, you can work without commissioning directly on the machine, easily achieve high efficiency and high power boost.
Frequently Asked Questions and Answers
1. Why is my module designed to this shape
A:Our module is designed for your convenience. You can also remove the USB holder and solder the module directly to the PCB. The package is DIP-24.
2. How efficient is the module working I use it on the battery and it is very efficient. Can I use it
A:The efficiency of this module is very high in non-synchronous rectification. The highest efficiency of our test can reach 96%. There is also friends who do not blindly pursue high efficiency, high efficiency is proportional to the price, for example, you need 5V 0.5A power supply, 80% efficiency loss energy is 0.625W, 90% efficiency loss energy is 0.278W, Do you think it is necessary to double the cost of this 0.3W power It is ok to choose a combination.
3. Is this power module short-circuit protected When I use it, I accidentally output a short circuit and it will burn out
A:There is no short circuit protection. If you need short circuit protection, please connect the self-recovery fuse in series at the input.
4. Does this power module have input reverse connection protection When I use it, I accidentally input the power supply and it will burn out when I reverse it.
A:There is no reverse protection
5. Can this module current run at 5V 500mA for a long time
A:This module has a design power of 2.5W. It can run for a long time at 2.5W, and 5V*0.5A=2.5W can be operated for a long time. .
6. I need a current of about 2A. Can this module work in parallel
A:Direct parallel connection is not possible. There will be a large circulation between them. If you want to output parallel operation, you need to adjust the voltage of each module to a uniform error of less than 50 mV, so that it can work. Care should be taken to avoid overloading a single module and the output power should not exceed 70% of the total power of the module.
7. What is the working temperature of this module, can it reach the industrial level
A:Yes, the working temperature is -40 to 85 degrees.
Weight | 0.015 kg |
---|
Customers Also Viewed
BG01 GPS Module GPS+BDS Beidou Dual-mode Satellite Positioning and Navigation Module Wireless Transmission
$16.15Smart ModuleAdd to cartDescriptionThe BG01 is a highly integrated GNSS SOC module, Main chip is GK9501.It is a high-integration Multi-GNSS SOC that supports BDS/GPS/GLONASS/GALILEO/QZSS/SBAS with low power consumption. It integrates DC/DC,LDO, LNA, RF receiver,Base Band, 32-bit RISC CPU, RAM, Flash, RTC and PMU,and provides kinds of interfaces like UART, I2C, SPI and GPIO.The BG01 supports crystal and TCXO …
Wareshare 5 inch VGA HDMI High Definition Display Capacitive Touch Screen Support for NVIDIA Jetson Nano Raspberry Pi
$99.13Display ScreenAdd to cartOverviewThis product is a universal 5-inch HDMI display with 800 x 480 HD resolution and a capacitive touch panel. Support for Raspberry Pi, NVIDIA Jetson Nano and various mini PCs, as well as computer monitors.FeaturesThe hardware resolution is 800*480, and the resolution can be configured by software (up to 1920*1080)Support mainstream mini PCs such as …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter for
$12.46Electronic Accessories & SuppliesAdd to cartDescriptionUSB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO BRD. To your computer, via the usb port.SpecificationBuilt-in TTL COM PC-PL2303HX ChipStandard USB type A male and TTL 4 pin connectorCable length:1000mm (39 3/8 in)Simple and Easy way to give …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter forRead More
Desktop Telephone Wireless Telephone 4G Wireless GSM Desk Phone SIM Card Desktop Telephone Machine
$66.81Switch AccessoriesAdd to cartProtable Wireless Terminal GSM Desk Phone SIM Card Mobile Desktop Telephone SpecificationOperating Frequency:GSM900MHz and GSM1800MHzOutput PowerGSM900 way:Class 4 (2W)GSM1800 mode:Class 1 (1W)Working Temperature:0 ~ 55 degreeRelative Humidity:5 % to 95%Adapter Input Voltage:AC 50Hz, 220V +10%Backup Battery:Ni-MH battery ,1000 mAhStandby Time:48-72 hours , depending on the network status may be ( battery power )Talk Time:2-6 hours, …
CBB60 5Pcs 55UF 450V Water Pump Motor Run Capacitor
$68.39Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 55UF 450V Water Pump Motor Run CapacitorRead More
3pcs 2S 10A 7.4V 8.4V 18650 Lithium Battery Protection Board Balanced Function Overcharged Protection
$8.59Power Supply ModuleAdd to cartSpecificationsModel:HX – 2S – D20 Overcharging range:4.25-4.35V ( ±0.05V)Over voltage range:2.5-3.0V (± 0.05 V)Maximum working current:13A Working temperature:- 40 – 50 →Maximum instantaneous current:20A Storage conditions:- 40 – 80 →Static current:less than 10uAResistance:less than 300 m ΩShort circuit protection:to protect and restore must chargeCharging Voltage:8.4 V – 9VBoard Size:46 x 20 x 3.6 mmWelding PointB:battery …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.