2PCS KSA80 Field Effect Tube Class A Power Amplifier Board J162 K1058
$338.28
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Use original J162/K1058 field effect tube bile taste tube, MJE15032/MJE15033, MJE340/MJE350.
2. The capacitor between coupling stages adopts 2.2UF WIMA capacitor imported from Germany, with natural sound and wide sound field
3. The resistance uses five-ring metal resistors, and the main circuit uses five-ring metal film resistors with an accuracy of ÷1% to ensure a good signal-to-noise ratio of the whole machine.
4. The PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and full tinning process to ensure good passing performance of large and small currents. First-class PCB quality.
5. This board uses the current advanced C1237 speaker protection circuit, which effectively eliminates the impact sound of turning on and off and the DC output protection function, making your speakers safer.
6. The wiring layout of the whole circuit board is quite rigorous and reasonable, and the whole PCB wiring adopts one-point grounding method. The power amplifier board works stably and reliably, with large output power; the sound is beautiful and round, and the sound field is open. It has a strong stereo effect, stable and powerful low frequency, excellent signal-to-noise ratio, wide dynamic range; clear details, excellent transient response, and can play all kinds of music with ease, and has a very good performance in the home environment.
Basic parameter
1. Power supply parameters:one set:DC +-40V (AC:transformer 300W double 28V, need to add rectifier board)
The other group:single AC15V (note:each board is powered by a single AC15V power supply, that is, one board uses a single AC15V power supply)
2. The power amplifier board can use master-slave integrated power supply. When the master-slave integrated power supply, each channel uses 26-28V voltage and 6-8A current. The official recommendation is DC 70V, so our maximum working voltage is not more than 80V, which is plus or minus 40V. . That is, the transformer outputs 26-28V AC. When the master and slave are powered separately, the current amplification part adopts 26-28V, and the voltage amplification adopts 26 to 30V transformer voltage
3. Class A 80W, measured under 4 ohm load
4. Speaker impedance:4-8 ohms.
5. This circuit is easy to debug, just adjust the quiescent current, string a multimeter on the positive pole, set the multimeter to the 10A or 20A position, adjust the potentiometer VR1 clockwise to adjust the current to 1.5A, this board has no temperature No need to adjust repeatedly. This adjustment is based on the recommended radiator size adjustment parameters in this article. If the radiator is too large or too small, the debugging will be changed. If the radiator is relatively large, the maximum quiescent current should not exceed 2A. If the radiator is too small, the temperature of the radiator should not exceed 60 degrees. When any point is reached, the quiescent current must be reduced to ensure safety.
6. Radiator requirements:350 X 150 X 50 (length. width. tooth height) recommended above 2KG
7. The size of the board with the radiator:328*120MM
8. Weight:0.65KG+0.65KG
Package included
2 x Power Amplifier Board
Weight | 1.39 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.