5pcs 2S Li-ion 18650 Lithium Battery Charger Protection Board
$17.94
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. The protection board uses imported lithium polymer rechargeable battery protection IC
2. Built-in three overcurrent detection circuit (current 1, current 2, load short circuit)
3. Through the MOS tube can control the battery charge and discharge
4. Connect the terminals of the charger with high withstand voltage devices
5. Operating temperature range:negative 40 degrees to 60 degrees
6. Built-in high-precision voltage detection circuit
7. Low current consumption
Welding point Description
B + is connected to the positive side of the battery pack
MB Connect the contacts in battery 1 and battery 2
B – Connect the negative of the battery pack
P + is connected to the positive terminal (charge side / discharge side)
P-negative / negative terminal (shared with charge / discharge)
Voltage:Charging voltage:DC9V CC/CV (Max.12V)
Single-section equalization voltage:/
Current:Single-phase equalization current:/
Single section current consumption (self-consumption):≤6uA
Maximum sustained discharge current:4A
Overcharge protection:Overcharge detection voltage:4.29V
Accuracy:≤ ±0.025V
Overcharge detection delay time:1s
Overcharge detection recovery voltage:4.05V
Accuracy:≤ ±0.025V
Overdischarge protection:Overdischarge detection voltage:3V
Accuracy:≤ ±0.1V
Overdischarge detection delay time:128ms
Overdischarge detection recovery voltage:3.2V
Accuracy:≤ ±0.1V
Overcurrent protection:Overcurrent detection voltage:200mv
Accuracy:≤ ±30mv
Overcurrent detection current:9.8A
Accuracy:≤ ±3A
Overcurrent detection delay time:12ms
Recovery status:Automatic recovery
Short circuit protection:Detection status:External short circuit
Detection delay time:≤50us
Recovery status:Automatic recovery
Internal resistance:Protection circuit (MOSPET):≤21mΩ
Temperature:Working temperature range:-40~+52°C
Storage temperature range:-40~+125°C
Product Usage
2 strings of nickel cobalt manganese, lithium cobalt oxide, lithium manganese oxide rechargeable batteries
2 series lithium polymer rechargeable battery
Notice
1. During connection,pay attention to input/output voltage,load current using condition, and make sure that board power consumption will not surpass tolerance consumption
2. When connect with battery,it may not discharge;in this condition,continuous charging can let it restore to normal operating state
3. When overcharging battery and overdischarging battery are mixed up,it will become charging and overdischarging state, both of them cannot perform charging and discharging
4. Although this protection board internallt installs anti-static protection circuit, please don’t force too high static electricty on protection board
Package included
5 x 2S Li-ion 18650 Lithium Battery Charger Protection Board
Weight | 0.075 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.