10pcs Stereo Audio Isolator Common Anti-interference Signal Generator Noise Filter Computer Audio Current Sound Canceller
$53.12
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Parts selection:two independent audio are used, and the former material is selected from aerospace materials.
High sensitivity and high reductivity, higher sensitivity than 10-120DB of similar low-end formers, full tone and pure sound quality.
2. Line design:stereo dual-channel independent design, circuit board specifications:45MM X 30MM, very small, suitable for small spaces and other automotive interior installation.
3. Connection method:Two connection methods, which can be input and output through the 3.5MM headphone jack, or directly through two blue wiring sockets.
4. Main function:Eliminate current sound. The common isolated audio former eliminates the current sound brought by the AUX common ground, and the output and output ground wires are isolated by the former, and there is no common ground.
What is the common ground
This product is an audio common ground isolator, which effectively suppresses the noise caused by the common ground for the sound source and the receiving device.
So what is the common ground To put it simply, the ground point of the two electrical appliances is not at the same point. Due to the difference in grounding resistance, noise is mitted into the electrical equipment through the ground wire to form interference. Because the grounding points of the two devices are different, it is possible to generate common ground noise. The noise is mainly reflected in the car audio, that is, there is an audio interference, like the whistling sound, the frequency of this noise will change with the engine speed. Therefore, this product can only eliminate the noise and current sound generated by the common electricity, and can not eliminate the noise caused by other reasons, so you need to confirm the source of the noise yourself.
Determine if noise is caused by common ground
1. Use the earphone to connect with the car MP3 and car navigation AUX (3.5mm interface). If the sound heard from the earphone is no noise at this time, it can be confirmed that the noise of the car device is caused by the common ground.
2. Use the audio cable to connect the battery-powered mobile phone, or MP3 (note that the mobile phone, MP3 is not connected to any power source on the car, such as a telephone), and the AUX of the car center console, and play the music of the mobile phone. Noise can confirm that the noise was caused by the common ground.
3. Computer, amplifier, stereo, CD:Use a passive headset to plug in the computer to hear if there is noise, use the phone to plug in the amplifier, audio audition, if there is no noise, the basic judgment is caused by the common ground.
4. After starting the car, the installed amplifier has a current sound. In some models, the throttle is larger and the current is louder. This product can solve this problem.
5. There is a current sound between the amplifier and the speaker or the sound. This product can be installed between the amplifier and the speaker.
6. When the laptop is connected to the projector and the amplifier is connected with noise, you can connect the adapter to the power supply or use the battery. At this time, unplug the amplifier and disappear, or unplug the projector and the noise will disappear. Then you can use the headphone jack and amplifier of the computer. Add a common ground isolator to eliminate noise.
Package Included
10 x Stereo Audio Isolator Common Anti-interference Signal Noise Filter
Weight | 0.02 kg |
---|
Customers Also Viewed
WQ-BX-S2 Water Filter Activated Carbon Cartridge Replacement Refrigerator Filter for SAMSUNG
$52.64Switch AccessoriesAdd to cartSpecificationsMaterial:PC+Activated CarbonMin.Working pressure:207 kPa/30 psiMax.working pressure:689 kPa/100 psiMin.operating temperature:0.6°C/33°FMax.operating temperature:38°C/100°FRated service flow:0.5gpm(1.89L/min)Rated capacity:300 gallons(1136 liters)Features-Replace the filter every 6 months.-Made of coconut shell carbon fiber and PC,nice quality and filter performance.-Help to filter water,reduce residual chlorine and peculiar smell,which makes water taste better.-The refrigerator water filter have been tested and certified by NSF International against …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266
$26.23Smart ModuleAdd to cartDescriptionESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technology, power and optimized RF characteristics, which is safe, reliable, …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266Read More
DIY Holographic Projection Building Block Virtual Imaging Blocks Toys
$19.97PhysicsAdd to cartName:DIY Holographic Projection Building Block Virtual ImagingModel:JY-WIZT00300SpecificationNet weight:189.4gPackaging size:395*285*5mmComposite finished product size:140*140*55mmColour:Log colourMaterial:WoodFeatures– Training of Practical Ability– Types of Science and Education:Physics– Intelligence trainingNote1. Because there may be slight deviation in manual measurement, please refer to the actual object.2. The picture is the finished product after installation and the shipment is the installation material package.3. …
DIY Holographic Projection Building Block Virtual Imaging Blocks ToysRead More
Laser Protective Goggles Glasses 405nm 445nm 650nm Red Blue Blue-violet Laser Eye Protection Safety
$26.31Laser Safety GlassesAdd to cartSpecificationName:Laser Protective GogglesMaterial:PlasticOptical Density (OD):OD4+Typical Laser Wavelength:650nm, 445nm, 405nmFeatures– Good protective performance, can filter 80% strong laser light.– Perfect for laser protection of 650nm red laser, 445nm blue laser, 405nm blue-violet laser.– Offer effective protection for your eyes in laser engraving operation.Package Included1 x Laser Protective Goggles1 x Storage Pouch
5Pcs Rain Sensor Water Level Measure Module Raindrop Analog Sensor Board
$12.88Sensor & Detector ModuleAdd to cartParameterWorking voltage:DC 5VWorking current:less than 35MAType:Analog SensorTest area:40 mm x 18 mmOperating temperature:10 → to 30 →Working humidity:10% – 90% No condensationFixing hole size:Φ3mmProduct size:60mm x 22mmApplicable occasions:Design of water level alarmFeatures:Simple, easy to use, small size, light, cost-effectivePackage includes5 x Rain Sensor
3pcs 36*IR LED Board for CCTV Camera Night Vision 60mm for CS LEN infrared Light Board DC12V
$12.06LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsLED Number:36PCSBoard Diameter:60 mm (outside) / 34mm (inside)Power Supply:DC12V / 220mA (typical)Operation …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$27.46Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
Reviews
There are no reviews yet.