10pcs Stereo Audio Isolator Common Anti-interference Signal Generator Noise Filter Computer Audio Current Sound Canceller
$53.12
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Parts selection:two independent audio are used, and the former material is selected from aerospace materials.
High sensitivity and high reductivity, higher sensitivity than 10-120DB of similar low-end formers, full tone and pure sound quality.
2. Line design:stereo dual-channel independent design, circuit board specifications:45MM X 30MM, very small, suitable for small spaces and other automotive interior installation.
3. Connection method:Two connection methods, which can be input and output through the 3.5MM headphone jack, or directly through two blue wiring sockets.
4. Main function:Eliminate current sound. The common isolated audio former eliminates the current sound brought by the AUX common ground, and the output and output ground wires are isolated by the former, and there is no common ground.
What is the common ground
This product is an audio common ground isolator, which effectively suppresses the noise caused by the common ground for the sound source and the receiving device.
So what is the common ground To put it simply, the ground point of the two electrical appliances is not at the same point. Due to the difference in grounding resistance, noise is mitted into the electrical equipment through the ground wire to form interference. Because the grounding points of the two devices are different, it is possible to generate common ground noise. The noise is mainly reflected in the car audio, that is, there is an audio interference, like the whistling sound, the frequency of this noise will change with the engine speed. Therefore, this product can only eliminate the noise and current sound generated by the common electricity, and can not eliminate the noise caused by other reasons, so you need to confirm the source of the noise yourself.
Determine if noise is caused by common ground
1. Use the earphone to connect with the car MP3 and car navigation AUX (3.5mm interface). If the sound heard from the earphone is no noise at this time, it can be confirmed that the noise of the car device is caused by the common ground.
2. Use the audio cable to connect the battery-powered mobile phone, or MP3 (note that the mobile phone, MP3 is not connected to any power source on the car, such as a telephone), and the AUX of the car center console, and play the music of the mobile phone. Noise can confirm that the noise was caused by the common ground.
3. Computer, amplifier, stereo, CD:Use a passive headset to plug in the computer to hear if there is noise, use the phone to plug in the amplifier, audio audition, if there is no noise, the basic judgment is caused by the common ground.
4. After starting the car, the installed amplifier has a current sound. In some models, the throttle is larger and the current is louder. This product can solve this problem.
5. There is a current sound between the amplifier and the speaker or the sound. This product can be installed between the amplifier and the speaker.
6. When the laptop is connected to the projector and the amplifier is connected with noise, you can connect the adapter to the power supply or use the battery. At this time, unplug the amplifier and disappear, or unplug the projector and the noise will disappear. Then you can use the headphone jack and amplifier of the computer. Add a common ground isolator to eliminate noise.
Package Included
10 x Stereo Audio Isolator Common Anti-interference Signal Noise Filter
Weight | 0.02 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.