10V 12V 24V 36V PWM DC Controller with Positive inversion Switch PWM DC Controller for DC Motor Speed Controller 150W
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
3. Potentiometer knob. Adjusting the potentiometer knob can change the output duty ratio of the governor and the motor speed.
Specifications
1. Input voltage requirement:10V-40VDC (wide range)
2. Output power:150W
3. Continuous current:5A, overload short circuit protection current 8A, short circuit time no more than 30 seconds
4. PWM pulse width modulation range:0%-100%
5. Size:length 74mm*width 46mm height about 27mm
according to the center distance of the mounting hole 63.5mm*36.5mm
positioning hole diameter 3.5mm
6. Weight:60 grams.
Introduction to PWM
The full name of pulse width modulation is:Pulse WidthModulator, or PWM for short. Because of its special performance, it is often used as a lamp dimming in a DC loop or a DC motor speed regulating. This circuit is a motor controller made using the principle of pulse width modulation (PWM). Using this method to control the motor speed has two advantages
1. It is mainly by changing the duty cycle of the output square wave to change the average on-time on the load from 0-100% to achieve the purpose of adjusting the brightness/speed of the load. The advantage of using pulse width modulation (PWM) to achieve dimming/speed regulation is that the energy of the power supply can be fully utilized and the efficiency of the circuit is high. For example:when the output is a 50% square wave, the power source energy consumed by the pulse width modulation (PWM) circuit is also 50%, that is, almost all energy is converted into load power output. When the common resistor step-down speed regulation is used, to make the load obtain 50% of the maximum output power of the power supply, the power supply must provide more than 71% of the output power, of which 21% is consumed by the voltage drop and heat consumption of the resistor.
2. The pulse width modulation (PWM) method can make the load get the full power supply voltage when it is working, which is beneficial to overcome the internal coil resistance of the motor and make the motor generate greater torque.
Wiring
1. Connect the power cord, ensure that the positive and negative switches are in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 10V and less than 40V, and ensure that the output power of the power supply meets the needs of the motor. Do not connect the positive and negative terminals of the DC power supply in reverse, otherwise The governor may be damaged.
Package Inlcuded
1 x 10V 12V 24V 36V PWM DC Controller
Weight | 0.065 kg |
---|
Customers Also Viewed
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel Tool
$56.69Mesh & Wire ClothAdd to cartSpecificationsColor:White+blueMaterial:ABSSize:49×31.5cm / 19×12′Deepth of net:52cm / 20′Fits for:Extension poles of the diameter of 3cm/1.2′Feature– Making cleaning and maintaining the pool simple, fast, and convenient, for safe and sanitary.– Spring-loaded locking clips on the handle to attach extension poles.– Deep bag and fine-mesh are great for grabbing dirt and small debris from the pool bottom.– Made …
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel ToolRead More
18650 Battery Box Rechargeable Battery Holder Board with Switch for 2×18650 Batteries DIY kit Case
$4.36Other Module BoardAdd to cartSpecificationsNumber of sections:2Uses:for 18650 battery (without battery)With switch:YesSize:42*22*90mmCable:15cmPackage Included1 x 18650 Battery Box Rechargeable Battery Holder
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit Breaker
$18.21Switch AccessoriesAdd to cartSpecificationsName:Overload ProtectorBrand:KUOYUHRated current:25ARated Voltage:125/250V AC, 32V DC, 50-60HZBreak capacity:1000A x 125V AC, 200A x 250V ACPressure ability:1500V AC for 1 minute, the leakage current is less than 0.5mAMinimum Voltage:less than 0.25VReset time:within 60 secondInsulation resistance:500V DC continuous for 5S, the insulation resistance will be more than 100MΩWeight:35gCertificate:UL,CSA,VDE, RoHSFeatures– When the load exceeds the rated current, …
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit BreakerRead More
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
3pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$6.87Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
Mini-Whip MF/HF/VHF SDR Antenna Miniwhip Shortwave Active Antenna for Ore V6N7
$56.85Motherboard & Development BoardAdd to cartDescriptionAccessory Type:USB To DC CableCompatible With:HackRF RTL-SDRColor:greenMaterial:metal + pcProduct DescriptionEffective bandMedium waveShortwaveUltrashort waveApplicable environmentIndoorOutdoorVoltage range:9V-15VPackage includes2 x Antenna2 x Module1 x Power cable
5pcs W1701 12V DC Digital Temperature Controller Switch thermostat Adjustable thermostat Temperature Switch Cooling Controller
$41.51Sensor & Detector ModuleAdd to cartSpecificationModel:W1701Size:Approx. 36.5×36.5×18 mm/1.44×1.44×0.71 inchInstallation screw:M3 * 2 diagonal size 39.5mmTemperature range:20-90 °Control Mode:Heating, Cooling, Heat dissipationControl Accuracy:0.1 °Hysteresis Setting:1-10 °Refresh Rate:0.5SSupply Voltage:DC 12VOutput Voltage:DC 12VOutput Power:Max 200WStatic Current:≤ 3MA, attract current ≤ 60MATemperature Probe:10K thermistorB25 = 10K 395030cm Waterproof SensorEnvironmental Requirements:-10 ~ 60 °Humidity 20% -85%Can be used in the (liquid, mold, space) and other …
Reviews
There are no reviews yet.