5110 LCD Module Display Monitor White Backlight Adapter PCB 84×84 5110 Screen for Arduino
$10.65
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. 84 X 84 dot matrix LCD,can show 4 lines of characters
2. Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND. Support different types of MCU, such as the SPI, MCS51 serial mode 0 of AVR. Transfer rate up to 4Mbps, can full speed write display data without waiting time.
3. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
4. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
5. Low power supply,the working current in normal situation is lower than 200┢A,and has power-down mode
Specification
LCD5110 Module
Power supply voltage2.7V-3.3V,5V is OK,but part of the screen becomes black when tested
Data interface level2.7-5V
Backlight power supply voltagehighest 3.3V
Module size43.6mm x 43.1mm(width X height)
Installation diameter2mm
BacklightWhite
Note
LIGHT linked with GND, the backlight to be lit.
Need you to compress the screen and PCB tighter, might got loose after the delivery.
Use a 3.3V controller, otherwise the display could be quite vague.
RST——— reset
CE————chip selection
DC———–data/commands choice
DIN———–serial data line
CLK————serial Clock Spee
3.3V————VCC
LIGHT——— backlight control terminal
GND———–power negative
BL ———– backlight control end.
Package Included
1 x 5110 LCD Module
1 x Row needles
Weight | 0.025 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.