YX-815 Battery Charging Controller Battery Protection Module for Undervoltage Control Over-discharge Protection Board 6V-48V
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
– The battery charge controller has adjustable parameters and power-off memory function.
– Control voltage is 5V-60V, accuracy is up to 0.1V.
– The battery charge controller is suitable for batteries, lithium batteries, etc.
– The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications
Model:YX815
Control voltage:5V-60V
Control current:20A
Control accuracy:0.1V
Voltage error:±0.1V
Scope:battery, lithium battery, etc.
Packing:anti-static bag
Size:7.9 x 4.3 x 2.8cm
Installation size:76 x 39.5mm
Voltage Setting Method
*In the setting state (digital tube flashing)
S1:Up-regulation voltage
S2:Down voltage
*S1 undervoltage setting button (charge start, load stop)
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start)
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note:When s1 cannot increase the voltage, first set s2, s2 can’t lower the voltage, first set s1)
Package Included
1 x YX-815 Battery Charging Controller Battery Protection Module
Weight | 0.041 kg |
---|
Customers Also Viewed
20pcs WEAH-122 Speaker Professional Frequency Divider Car Horn Sound Power Crossover
$139.47Amplifier BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureBrand:WEAHModel:122Power:110WResistance:4-8ohmSize:100x 54 x 28mmFrequency:750-2000HzFiltering Characteristics:Pure Alto CrossoverPackage includes20 x Frequency Divider
DS18B20 Expansion Board Shield for D1 Mini DS18B20 Temperature Measurement Sensor Module
$6.55Expansion Board & ShieldAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included1 x DS18B20 Module2 x Long female pin2 x Short female pin2 x Normal pin
Human Body Pyroelectric infrared induction Alarm Circuit Kit Welding Electronic Training DIY
$8.73DIY Electronic KitsAdd to cartFeatureBoard size:5*4.9cmPower supply voltage:5-6V DCFunction realizationThe human body infrared sensor alarm circuit is composed of pyroelectric infrared sensor PIR1 (D203S), infrared sensor signal processor U1 (BISS0001), voice chip IC1 (C002) and alarm circuit. The circuit can be used as a home anti-theft, without sound, light, vibration, even in a dark state, once it enters the …
CPU info 1.6 inch LCD 84×48 Memory Display Module with Backlight for Raspberry Pi Zero / 1/2 / 3 /3B+
$22.95Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis CPU Info 1.6-inch LCD resolution is 84*48, which can be used in the Pi0/Pi1/Pi2/Pi3 full range of Raspberry Pi. It features a 26Pin GPIO pin header design. The female pin on …
BESTEP 6 Channel 5V Relay Module High And Low Level Trigger
$19.67Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage is 5V.Each channel of the module can be set up by high jumper or low level trigger.Fault tolerant design, even if the control line is broken, the relay will not act.Power indicator (green), 6 relay status indicator (red).The …
BESTEP 6 Channel 5V Relay Module High And Low Level TriggerRead More
Reviews
There are no reviews yet.