YYD-4 Double MOS Timer Relay Module 2 Channel Cycle Delay Timing Relay for Control Solenoid Valve Water Pump Switch
$22.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– To achieve high frequency, fast and frequent switching of the circuit. – The on-off process will not produce noise.
– No sparks.
– There will be no electromagnetic interference.
– Often used to control motors, light bulbs, LED strips, DC motors, micro pumps, solenoid valves, etc.
– The function mode can be set freely by the customer, and the power-off automatically memorizes the function and time set last time.
– Delay time range:0.1 seconds for 9 seconds, 1 second to 999 seconds, 1 minute to 999 minutes, the customer can adjust.
– After the parameter is cut off, it can be memorized forever. The input and output are isolated by optocoupler to enhance the anti-interference ability.
Specifications
Output capacity:DC 5A
Working voltage:DC DC 7~30V (common general working voltage 9v 12V 24V)
Quiescent current:20mA Operating current:60mA
Size:80mm*51mm*15mm
Signal terminal:high level trigger, can be connected to PNP sensor, proximity switch, button, button switch, etc.
Functions
Function 1:P——1
Give signal 1, OUT1 output, and stop automatically after delay time .
Signal 2, OUT2 output, after the delay time , automatically stop.
During the delay period, the trigger again can be freely set
A:The trigger is invalid again;
B:Trigger re-timed again;
C:The reset timing is triggered again and the motor stops immediately.
If the delay time is set to 0;
Give signal 1, OUT1 output, keep output;
Give signal 2, OUT2 output, keep output;
Function 2:P——2
No signal terminal is required, and the energized motor automatically works in turn;
Specific working mode:stop Y (seconds, minutes) – OUT1 work X (seconds, minutes) – stop Y (seconds, minutes) – OUT2 work …. cycle work. ……. Cycle work.
If the stop delay time is set to 0;
Specific working mode OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) — OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) ……….. Cycle work.
Package Included
1 x YYD-4 2 Channel Cycle Delay Timing Relay
Weight | 0.039 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.