YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/interlock Switch Relay Board
$26.43
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This programmable control board is designed with 3-channel relays.
– It supports time delay/interlock/self-latching/sequential starting.
– The module is powerful and convenient to operate.
– There are six kinds of commonly used functions to meet the demand of more applications.
– It can be used to control solenoid valves, pumps, motors, light belt, etc.
Specification
Model:YYS-4
Input voltage:DC/AC 7V~30V
Output power:Can control DC or AC loads within 5A
Time range:Adjustable from 0.1 seconds to 999 minutes
Wiring
1. AC/DC:Input power supply DC/AC 7V~30V
2. IN1:Signal input 1 (negative trigger)
3. IN2:Signal input 2 (negative trigger)
4. IN3:Signal input 3 (negative trigger)
5. NO:relay normally open interface, relay are disconnected before energized, and connected to COM after energized.
6. COM:relay COM interface
7. NC:relay normally closed interface, connected to COM before relay is energized, and disconnected after relay is energized.
Functions
Function can be set freely by user;Set parameters can be saved after power failure.
P–1:send signal 1, relay 1 is energized till A time automatically stop;
send signal 2, relay 2 is energized till B time automatically stop;
send signal 3, relay 3 is energized till C time automatically stop;
There is only one relay at work at the same time.
P–2:send signal 1, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;Send signal 1 again, repeat the former action.
Send signal 2, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;then relay 1 is energized till A time stop…an infinite cycle.
Send signal 3, relay 1 is energized for 100ms then stop, wait A time; relay 2 is energized for 100ms then stop, wait B time; relay 3 is energized for 100ms then stop, wait C time; relay 3 is energized for 100ms then stop, wait A time; relay 1 is energized for 100ms then stop… an infinite cycle.
P–3:After powered on, relay 1 is energized for A time then stop, wait C time;relay 2 is energized for B time then stop, wait C time;Relay 1 and relay 2 work in turn;During the period of relay 1 and relay 2 are energized, relay 3 stops;During the period of relay 1 and relay 2 are de-energized,relay 3 is energized;
P–4:send signal 1, relay 1 will be energized after a delay of A time, then relay 2 will be energized after a delay of B time, and then relay 3 will be energized after a delay of C time;
send signal 2, relay 1 will be de-energized after a delay of A time, then relay 2 will be de-energized after a delay of B time, and then relay 3 will be de-energized after a delay of C time;
send signal 3, emergency reset signal;
P–5:send signal 1, relay 1 would work;send signal 1 again, relay stops; sending signal 2, 3 is respectively corresponding to each relay action; 3 channels are independent from each other.
P–6:send a signal 1, relay would work, while other relays stop;send signal 1 again, relay stops;sending signal 2, 3 is respectively corresponding to each relay action;There is only one relay at work at the same time.
Button setting instructions
After powered on, it shows inch—-inch to enter standby state;
press K1,
screen display:P–1:K2 and K3 adjust mode
Press K1 again, screen display:A001:K2 and K3 adjust the first time A, K4 adjust decimal point (time units)
Press K1 for the third time, screen display:B001:K2 and K3 adjust the second time B, K4 adjust decimal point (time units)
Press K1 for the forth time, screen display:C001:K2 and K3 adjust the third time C, K4 adjust decimal point (time units)
Press K1 for the fifth time, it shows inch—-inch to enter standby state;
Decimal point and unit of time
XX.X:The decimal point in the inchtensinch position, timing range:0.1 seconds ~ 99.9 seconds.
XXX:No decimal point, timing range:1 second~9999 seconds.
XXX.:The decimal point in the units position, timing range:1 minute ~ 999 minutes.
Package Included
1 x YYS-4 3 Channel Programmable Relay Control Module
Weight | 0.093 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.