YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/interlock Switch Relay Board
$26.43
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This programmable control board is designed with 3-channel relays.
– It supports time delay/interlock/self-latching/sequential starting.
– The module is powerful and convenient to operate.
– There are six kinds of commonly used functions to meet the demand of more applications.
– It can be used to control solenoid valves, pumps, motors, light belt, etc.
Specification
Model:YYS-4
Input voltage:DC/AC 7V~30V
Output power:Can control DC or AC loads within 5A
Time range:Adjustable from 0.1 seconds to 999 minutes
Wiring
1. AC/DC:Input power supply DC/AC 7V~30V
2. IN1:Signal input 1 (negative trigger)
3. IN2:Signal input 2 (negative trigger)
4. IN3:Signal input 3 (negative trigger)
5. NO:relay normally open interface, relay are disconnected before energized, and connected to COM after energized.
6. COM:relay COM interface
7. NC:relay normally closed interface, connected to COM before relay is energized, and disconnected after relay is energized.
Functions
Function can be set freely by user;Set parameters can be saved after power failure.
P–1:send signal 1, relay 1 is energized till A time automatically stop;
send signal 2, relay 2 is energized till B time automatically stop;
send signal 3, relay 3 is energized till C time automatically stop;
There is only one relay at work at the same time.
P–2:send signal 1, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;Send signal 1 again, repeat the former action.
Send signal 2, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;then relay 1 is energized till A time stop…an infinite cycle.
Send signal 3, relay 1 is energized for 100ms then stop, wait A time; relay 2 is energized for 100ms then stop, wait B time; relay 3 is energized for 100ms then stop, wait C time; relay 3 is energized for 100ms then stop, wait A time; relay 1 is energized for 100ms then stop… an infinite cycle.
P–3:After powered on, relay 1 is energized for A time then stop, wait C time;relay 2 is energized for B time then stop, wait C time;Relay 1 and relay 2 work in turn;During the period of relay 1 and relay 2 are energized, relay 3 stops;During the period of relay 1 and relay 2 are de-energized,relay 3 is energized;
P–4:send signal 1, relay 1 will be energized after a delay of A time, then relay 2 will be energized after a delay of B time, and then relay 3 will be energized after a delay of C time;
send signal 2, relay 1 will be de-energized after a delay of A time, then relay 2 will be de-energized after a delay of B time, and then relay 3 will be de-energized after a delay of C time;
send signal 3, emergency reset signal;
P–5:send signal 1, relay 1 would work;send signal 1 again, relay stops; sending signal 2, 3 is respectively corresponding to each relay action; 3 channels are independent from each other.
P–6:send a signal 1, relay would work, while other relays stop;send signal 1 again, relay stops;sending signal 2, 3 is respectively corresponding to each relay action;There is only one relay at work at the same time.
Button setting instructions
After powered on, it shows inch—-inch to enter standby state;
press K1,
screen display:P–1:K2 and K3 adjust mode
Press K1 again, screen display:A001:K2 and K3 adjust the first time A, K4 adjust decimal point (time units)
Press K1 for the third time, screen display:B001:K2 and K3 adjust the second time B, K4 adjust decimal point (time units)
Press K1 for the forth time, screen display:C001:K2 and K3 adjust the third time C, K4 adjust decimal point (time units)
Press K1 for the fifth time, it shows inch—-inch to enter standby state;
Decimal point and unit of time
XX.X:The decimal point in the inchtensinch position, timing range:0.1 seconds ~ 99.9 seconds.
XXX:No decimal point, timing range:1 second~9999 seconds.
XXX.:The decimal point in the units position, timing range:1 minute ~ 999 minutes.
Package Included
1 x YYS-4 3 Channel Programmable Relay Control Module
Weight | 0.093 kg |
---|
Customers Also Viewed
CC2530F256RHAR cc2530 Module Serial Port Transparent Transmission with ZB502 Development Board Kit
$52.47Module KitsAdd to cartNoteAt least two CC2530 modules are needed to realize Z1gBee networking, this product contains only one.Two methods can be usedApplication method:(The bottom layer is implemented by the board, you only do the application)Use the firmware associated with the board. In this way, the board is a Z1gBee wireless serial port module, the operation is as …
H2519-5 Dual Row Plastic Terminal 600V 36A 6 Positions Screw Terminal Block Cable Connector Barrier Terminal Strip Block
$12.14ConnectorsAdd to cartSpecificationModel:H2519-5Type:Terminal block Working frequency:High frequencyInterface type:AC/DCRated current:36ARated voltage:600VConductor cross section:0.5-6mm2Number of pin:6Number of bits:6Contact material:CopperInsulation material:Insulation plasticSize:55.6mm x 21mm x21mmFeature:1) High precision2) Excellent inoxidability3) High corrosion resistance4) Great ingredient accuracy and high intensity5) Widely used in lamp, decorated lighting, factory, household appliances, distribution boxes and other transmission equipment, specially point at wire, cable access and …
2 Lamp Backlight Universal LCD CCFL 10V-28V inverter
$8.73Other Module BoardAdd to cart2 Lamp Backlight Universal LCD CCFL 10V-28V Inverter For 10 Inch To 22 Inch ScreenFeatureVoltage:10V ~ 28VCable:300mm(L) / 6 pinSize:122 x 27mm ( L x W )Interface:double light small interfaceInterface definition:1. VCC 2. GND 3. NULL 4. NULL 5. ON/OFFPackage included1 x 2 lamp backlight universal laptop LCD CCFL inverter 10V-28V1 x Cable
Wanptek NPS306W 110V/220V 0-30V 0-6A Adjustable Digital DC Power Supply 180W Regulated Laboratory Switching Power Supply
$170.09Electrical DC Power SupplyAdd to cartProduct descriptionThe Wanptek NPS-W series is a three-window display mini DC power supply that simultaneously displays voltage, current, and power.This product improves the shortcomings of traditional linear power supplies that are bulky, heavy, and inefficient.The output voltage and current of the product can be controlled and adjusted by coarse adjustment and fine adjustment potentiometer respectively, …
5pcs CJMCU-5102 PCM5102A Stereo Digital To Analog Converter DAC PLL Voice Module
$50.58Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionBrand:CJMCUPCM5102A Stereo DAC Digital To Analog Converter PLL Voice ModuleMore infos:!Package included5 x CJMCU-5102 Stereo DAC Digital To Analog Converter PLL Voice Module
1Channel RS485 MODBUS RTU Serial Port Multi-function Relay Module PLC Controller for Smart Home 12V DC
$12.66Relay ModuleAdd to cart>>> Manual:Click here to open SpecificationsWorking voltage:DC 12VWorking current:standby 11-13mA, 1 relay is on 44mA.Size:45 x 30 x 18 mmWeight:18 gramsMaximum load:10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDCFeatures-Six working modes:open, close, jog, self-lock, interlock, delay-AT command mode and MODBUS command control mode-Maximum delay of 9999 seconds under …
Reviews
There are no reviews yet.