817 Optocoupler 4 Channel Voltage Isolation Board Voltage Control Switching Module Optical Isolation Module 3.3V 5V
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This module is used when the actual operation requires isolation control and voltage conversion.
– It can realize 3.3V or 5V to control the interface of 3.6–24V voltage level. After the control terminal is turned on, the controlled terminal will also be turned on.
– Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
– If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
– Through the jumper cap can achieve whether the output is high potential output or low output.
– The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
Specifications
The drive terminal signal voltage:3.6-24V
The output voltage range:3.6-30V (output current depends on the specific situation, but the maximum is not 10MA, the total power is certain, the voltage and current are inversely proportional)
Board size:Length:48mm;Width:38mm; Long side hole distance:42mm; Wide side hole distance:32mm
Package Included
1 x 817 Optocoupler 4 Channel Voltage Isolation Board
Weight | 0.015 kg |
---|
Customers Also Viewed
5pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$17.37Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
MTOLASER 100mW 405nm Blue-violet Dot Laser Module Generator Variable Focus industrial Marking Position Alignment Diode Generator
$71.59Laser ModuleAdd to cartDescriptionThis variable focus 100mW 405nm Blue-violet dot laser module employs qualified 405nm red laser diode, generates the stable and reliable blue-violet laser dot applicable for various industrial alignments and positioning work. Compact size, easy to install, multi-angle adjustment of installation, easy to operate.SpecificationBrand:MTOLASERLaser Power:100mWWavelength:405nmBeam Shape:Dot Variable Focus:YESOutput Light:Visible LightWorking Voltage:DC 5VWorking Current:30-210mAOptics:Focus Lens Shell Material:Aviation …
DIY WiFi(APP Version) bluetooth Colorful Canton Tower LED Lighting Cube Music Spectrum Electronic Kit
$52.47DIY Electronic KitsAdd to cartDescription1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone bluetooth connection, available phone with the sound playback music. After using …
10pcs CJMCU-4599 Si4599 N and P Channel 40V (D -S) MOSFET Expansion Board Module
$24.37Expansion Board & ShieldAdd to cartFeaturesHalogen-freeTrenchFET power MOSFET100% UIS TestedApplicationsBackling inverter for LCD displayFull bridge converterPackage Included10 x CJMCU Expansion Board ModuleSize:8cm x 8cm x 5cm (3.15in x 3.15in x 1.97in)
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry Pi
$36.73Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesSupports any revision of Raspberry Pi (directly-pluggable)Onboard 4 ≠ 8 RGB LED (WS2812B)Control pin is configurable via jumpers (0┯ resistor)Break out control pins, easy for working with other MCUComes with development resources …
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry PiRead More
IR908-7C PT908-7C SideTransmitter and Receiver Paired Tube 1.5mm Transparent 940nm
$2.82Electronic Accessories & SuppliesAdd to cartFeaturesHigh sensitivitySmall junction capacitancePb freeDescriptionsPT908-7C is a phototransistor in miniature package which is molded in a water clear plastic with spherical top view lens.The device is spectrally matched to infrared emitting diode.ApplicationsOptoelectronic switchVCR ,Video CameraFloppy disk driveInfrared applied systemSpecificationModel:IR908-7C.PT908-7COutput form:NPN transistor typeChannel:single channelOutput wavelength:940 nmPackage included1 x IR908-7C phototransistor1 x PT908-7C phototransistor
20pcs ME2-CO-14×14 Carbon Monoxide Gas Sensor CO Sensor 0~1000 ppm for Civilian Area to Detect CO Concentration Carbon Monoxide Detector CO Alarms
$67.68Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionWinsen Electronics, produces Carbon monoxide sensor CO gas sensor, with low cost and fuel cell working principle.ME2-CO-14×14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current …
6inch/150mm Aluminum 12V DC Max Load 1000N Linear Actuator Electric Putter Motor
$111.36Switch AccessoriesAdd to cartFeatures* Wear-resistant, smooth appearance, high compressive strength.* Maximum thrust 6000N.* Easy to use.SpecificationMaterial:Aluminum + PlasticColor:SilverSize:28 x 8cmInput:12V DCStroke:6 inch/ 150mmMax load:1000NSpeed:12 /sPackage included1 x Electric putter2 x Bracket
Reviews
There are no reviews yet.