LM3914 Battery Capacity indicator Module LED Power Level Tester Display Board
$8.73
Color. Red / Color. Blue / Color. Green /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This is a DIY kits,need buyer to assemble it.
– Power display is to take some voltage, perform simulations show the percentage of segments, such as 3.7V lithium battery, take the lower voltage 3V, the upper limit of 4.2V, 4.2-3 = 1.2V, the voltage difference between the lower limit of 1.2V, is the battery Analog power up
– LM3914 can accurately detect an analog voltage, and 10 LED display, display dot mode LED is lit 10 one, or in a stripe pattern individually lit LED
– Display Description:Displays the battery voltage between the lower limit of 10 files showed that representatives of each of the lights 10% charge displays, on behalf of 10 lights display charge 0% -100% range; you can also change the single light display, is displayed only a light, more power, single-light power 4mA, all bright 42mA.
– Suitable for lithium batteries, lead-acid batteries and other power batteries need to be displayed
– Power adjustable display range for the battery discharge curve of a scientific setting, direct support:single lithium 1S (4.2V) ~ 4S (16.8V), lead acid 6V ~ 12V, NiMH 3.6V ~ 18V, nickel-cadmium batteries 3.6V ~ 18V
Parameter
Power:bar display full brightness 42ma, single light shows 4ma
Measuring range:the battery inside the common 2.4-20v
Color:red, green, blue,
Display:Multi-light bar display or a single light dot display
pcb board size:45 x 14 mm
Display Mode A / P:full brightness linear / single lamp lattice mode switch, the default is a linear model, the board set aside a switch pad, even with soldering pads can be turned into full light linear mode, no welding is the point like single light display
A variety of high and low voltage battery display range adjustment
1. Lithium battery
After the completion of a single lithium battery discharge voltage is 3V, when fully charged 4.2V;
1S correspond to 3V (first light) to 4.2V (tenth lights);
2S corresponds to 6V (first light) to 8.4V (tenth lights);
3S correspond to 9V (first light) to 12.6V (tenth lights);
4S correspond to 12V (first light) to 16.8V (tenth lights);
Other series voltage and so on.
2. Lead Acid Batteries
6V or 12V lead-acid battery is generally
6V corresponds to 4.8V (first red light) to 6.75V (tenth lights);
12V corresponds to 9.6V (first red light) to 13.5V (tenth lights);
The module according to the above standard battery discharge range design, can accurately reflect the battery, so that users can readily observe the status of the battery.
Adjustment methods
Equipment needed:an adjustable power supply, precision accuracy of the decisions of the panel display. Watches word screwdriver.
Case in single 3.7V lithium, 3V is less low-end power, 4.2V for the full power of high-end.
1. the adjustable power supply voltage to the desired voltage display high 4.2v, connect this board, this time there are two results:one is not bright, one is all bright or light a few. This time slow adjustment plate 503 (50k) potentiometer until the LED strip just lit up the whole. Several light does not shine or counterclockwise to adjust, when full light clockwise.
2. the adjustable power supply voltage to the low end of the desired 3V. Adjustment board 502 (5K) potentiometer to just light a LED, does not light clockwise adjustment, several or all bright light counterclockwise.
3. patiently repeating the first step two. Usually 2 times to adjust to the desired display range.
Note
To adjust their voltage, according to the method of adjusting the order, to emphasize high-end, then adjust the low end.Red then positive, then negative black, must not be reversed, this module is the maximum limit voltage DC 20V, please use anti-static welding or soldering station pull electric heat welding.
Package Included
1 x LM3914 Battery Capacity Tester Display Board
Weight | 0.05 kg |
---|
Customers Also Viewed
LED Light Lighting Kit ONLY for LEGO 60141 City Series Police Station Bricks Toy
$54.66DIY Electronic KitsAdd to cartDescriptionThe product is just a light kit, not included the model!!!Interface:USBColor:As the picture shownFitmentONLY For LEGO 60141 City Series Police Station Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5V 8 Channel Level Trigger Optocoupler Relay Module
$19.67Relay ModuleAdd to cartDescriptionThe module uses genuine quality relay, normally open interfacesUsing SMD optocoupler isolation, driving ability, stable performanceThe module can be high or low by a jumper setting triggerFault-tolerant design, even if the control line is broken, the relay will not operateThe power indicator (green), the relay status indicator (red)The interface design of human nature, all interfaces …
5V 8 Channel Level Trigger Optocoupler Relay ModuleRead More
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315Mhz
$8.73Smart ModuleAdd to cartNoteThis product does not supply any instructions, please reference the description.This version does not support copy code function, please note about this before you order it.FeatureVoltage:6VWorking frequency:315mhzExtremely easy to set up and useLearning face to face in secondsOnly copy of a fixed code, can not be copied rolling codeCovers application ranging from simple domestic remote …
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315MhzRead More
DIY D880 Transistor Series Power Supply Regulator Module Board Kit
$6.55DIY Electronic KitsAdd to cartNote:This is a DIY kit, you need to assemble it, no instruction supply.SepecificationInput voltage:AC 12-17V (No direction)Output voltage:DC 8-14V (adjustable)Output current:500mABoard size:4.9 * 3.5cmPackage includes1 x PCB board2 x 9013 transistor1 x D880 transistor1 x 15 * 10 * 20mm heatsink1 x M3 * 6 screws2 x 3.96-2P pillars4 x 1N4007 diode1 x 0.5W 6.8V …
DIY D880 Transistor Series Power Supply Regulator Module Board KitRead More
Reviews
There are no reviews yet.