3pcs 36/24/12/9V to 5V 3A Step Down Module 4USB interface Car charging Solar Buck Power Supply
$25.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Synchronous rectification
3A output current
Integrated power MOSFET switch
95% efficiency
Programmable soft start
Stable low ESR output
Cycle by cycle
Fixed frequency 340KH
Input undervoltage lockout
System protection excessive current limit
Overvoltage protection and thermal shutdown
Size:37 x 47 x 18mm (width x length x height)
Tips
Each double-layer USB shares a 5v3A chip, dual insurance solution, two double-layer USB independent power supply, each 3A, the total current is 6A.
The output voltage is between 5.08~5.18v
Wiring method:connect the positive voltage of the voltage of 7 to 38v to the input positive, the negative voltage to the negative of the lower icon, the four USB will have a stable 5v voltage, plug your mobile phone data cable into the USB. used. The output is convenient for those devices that do not have a USB cable. It is for professional use only. If you don’t understand it, you don’t need to worry about this interface.
Built-in Apple identification resistor, 47k+56k, 2.7v. Apple’s charging current is about 2.4A; Android phone is about 1A. Please use a good quality data cable.
Near the terminal block, there is a diode ss54, which is an anti-reverse diode. Professionals can short-circuit it, and can change it to a fuse and toss it by itself.
Q:My mobile phone current is only 1A. Will your 3A converter burn my phone
A:No; 3A means that the high current that this converter can withstand is 3A. As long as your device can be used below 3A current, the voltage is the same. The current is adaptive and built by the mobile phone. Chip controlled, this power supply is only available in standard 5v. As long as the working voltage is 5v, it can be used.
Package includes
3 x 36/24/12/9V to 5V 3A Step Down Module
Weight | 0.09 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.