5pcs MP3 Bluetooth Decoder Board with Amplifier Wireless Audio Receiver Module for Transfer Speaker Modified Car
$42.81
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Support bluetooth version 4.2, 3.7-5V power supply, support automatic connection function
On-board stereo Class D power amplifier module, maximum output 5W+5W
Can be connected to two 4Ω 6Ω 8Ω 3W (5W) speakers
Parameter
Power Supply:3.7-5V
SNR:90dB
THD+N:-70dB
Crosstalk:-86dB
DNR:91dB
Support:A2DP/AVCTP/AVDTP/AVRCP/HFP
LOS:>15m
5V USB power supply:Universal Micro USB 5V power supply
3.7-5V power supply pad:realize external 3.7-5V lithium battery power supply modification
LED indicator:bluetooth mode blue light is on
3.5mm audio interface:standard 3.5mm interface, output stereo sound source, can be plugged into headphones, connected to power amplifier and other equipment
Left channel 5W output:5W power amplifier output of the left channel of the decoder board, connected to 4Ω6Ω8Ω 3W (5W) speaker
Right channel 5W output:decoder board right channel 5W power amplifier output, connect 4Ω 6Ω 8Ω 3W (5W) speaker
Precautions
1. The decoder board supplies 3.7-5V, if it is higher than 5.5V, the chip will be burned. Do not reverse connect the positive and negative poles of the power supply. The reverse will burn the chip.
2. It is recommended that the DC power supply be 5V1A; if the power supply is insufficient, the speaker sound will be small. When the power supply is seriously insufficient, the speaker will make a “dida Inch sound, even without sound.
3. It is recommended to connect 2 channels of 4 ohm 3W (5W) speakers; if you connect 2 ohm speakers, the power amplifier chip will heat up, causing the chip to burn.
4. Pay attention to static electricity protection. It is easy to generate static electricity when the weather is dry. In the process of using the user, please use the static electricity on the conductor to operate the decoder board to avoid the decoder chip being destroyed by static electricity.
5. During use, the mobile phone and the bluetooth decoder board should not be blocked by obstacles such as walls, and should be kept away from the metal shield as much as possible; blocking will reduce the transmission distance, and in serious cases, the music will be stuck and intermittent; the decoder board can be properly adjusted. The angle of the phone adjusts the optimal state of the connection signal.
Instructions
After the power is turned on, the blue indicator light is on and enters the Bluetooth mode; after the “Beep Inch is broadcast, the pairing mode is entered to wait for pairing; the mobile phone Bluetooth searches for “XY-BT Inch (decoding board device name), and clicks “XY-BT Inch. Connect, play the inchBeepinch after the connection is successful, you can play the phone music; after the Bluetooth is disconnected, the decoder board prepares for the next pairing, and plays the inchBeepinch and enters the pairing mode to wait for pairing.
Package includes
5 x MP3 bluetooth Decoder Board
Weight | 0.04 kg |
---|
Customers Also Viewed
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubator
$56.69Switch AccessoriesAdd to cartFeatures– Made of high quality ABS material, insulating, stable and durable.– LED lamp head, high power, strong light source, can clearly detect the hatching of eggs.– Using high-quality materials, safe and durable, with buttons that are easy to open and close.– Suitable for hatching eggs, but also for children and students to learn the process …
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubatorRead More
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
3.7V Lithium Battery 4 Paragraph Power indicator Module
$4.36Test & Measuring ModuleAdd to cartDescription1, onboard high precision voltage detection chip and power supply voltage chip2, onboard four power indicator LED lights, three kinds of color display, red, yellow, yellow, green,representing 20%, 50%, 80%, 100% of the battery3, set aside a battery testing interface and two positioning hole4, PCB size:22.2 (mm) x17.2 (mm)Package included1 x 3.7V Lithium Battery 4 …
3.7V Lithium Battery 4 Paragraph Power indicator ModuleRead More
YAHBOOM High-quality T-shape Expansion Board + 40Pin GPIO Flat Rainbow Ribbon Cable for Raspberry 4B/3B+/ZERO/W
$10.21Raspberry Pi & Orange PiAdd to cartDescriptionThis high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.FeaturesSpecifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry Pi …
10pcs LM3915 10-segment Audio Level indicator Kit Electronic Soldering Training experiment DIY Parts
$33.89DIY Electronic KitsAdd to cartFeatrurePower supply:DC9-12VPCB size:62*27mm1 audio cable is needed. One end is subtracted and connected to the audio input port. The red cable is connected to AUDIO +, the green cable is connected to ADUIO-, and the blue cable is subtracted, do not need to solder.Package included10 x LM3915 10-segment Audio Level Indicator Kit
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$55.12Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.