3Pcs PWM Stepper Motor Driver Simple Controller Speed Controller forward and Reverse Control Pulse Generation
$63.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product name:simple controller
Model:CW-S01
It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.
Product Manual
1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver.
(This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.)
2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals.
REQ is to generate pulse frequency signal
PWM is to generate PWM signal
3. When the controller generates a pulse frequency signal, there are three types of high, medium and low frequency signals that can be selected with a jumper. The frequency parameters are approximately
High:5.8KHZ-127KHZ
Middle:590HZ-15.8KHZ
Low:82HZ-2.3KHZ,
Frequency measurement:You can measure PUL and common cathode (GND) two ports.
4. The power supply has 2 sets of power input, and 2 sets only need to connect one set of power supply. It is recommended to use a power supply of more than 15V. Connect to the power supply of the 2-bit terminal, do not connect the positive and negative.
One group is the power supply connected to DC 15-160VDC, and the recommended operating voltage is 15-80VDC.
The other group is 5-12VDC. When used with the driver, it is recommended to use a minimum of 12V, not a 5V power supply, not at 5V, the power supply is connected to ‘5-12V input’, and the power supply is connected to the ‘common cathode’.
5. Length * width * height:about 73 * 51 * 37MM
Controller:Driver
PUL:Pulse negative terminal (PUL-)
DIR:Negative direction (DIR-)
ENA:Enable negative terminal (EN-)
Common anode:Common port (COM or + 5V or PUL + DIR + EN + are connected at the same time)
Common cathode:Common ground (GND)
5-12V input+:The positive end of the 12V power supply is generally empty.It is recommended to use a power supply of more than 15V.
Example:Wiring with the common anode of the driver. If it is driven by 6 signal lines, the + 5V common terminals of the three signals must be connected in parallel to form a line and all connected to the common anode terminal.
Package includes
3 x Controller
Note
1. If you want to use the start or stop function, the ENA enable terminal on the controller must be connected to the driver with a common cathode or a common anode.
2. The forward and reverse rotation and the start and stop of the motor can be controlled by pressing the button.
3. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
4. The switch of the motor’s forward / reverse rotation and start / stop is an ordinary switch with self-locking.
5. If you want to connect the switches that control forward and reverse, and open or stop, to the chassis panel, you can refer to the following instructions.
Change the forward and reverse, the start-stop button into a lead-wire switch, see the pin position on the back
1. When the common cathode is connected, the 1 and 3 pins are processed, and the 2, 4, 5, and 6 pins are empty
2. When the common anode is connected, the 1 and 2 pins are processed, and the 3, 4, 5, and 6 pins are empty
The two switches are the same pin lead.
Weight | 0.141 kg |
---|
Customers Also Viewed
3pcs DC 1.8V 3V 5V 6V 12V 2A PWM Motor Speed Controller 0~100% Adjustable Drive Module 1803B
$14.99Motor PWM Speed ControllerAdd to cartFeatureThe input power range is DC 1.8-15V . Use a 2A resettable fuse to protect the controller.Potentiometer with switch function. Operating instruction:Before you attempting to wire the controller, make sure power is off.WARNING:TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR. Turn on the power, and adjust the potentiometer. The LED indicates …
Flax Liner Cloth Fiber Cloth Bakers Proofing Couche for Proving Bread Pans Kitchen Tool Fermentation
$19.83FabricsFibers & TextilesAdd to cartDescriptionThis flax liner cloth is made of flax linen material, natural, untreated, unbleached.SpecificationMaterial:Flax LinenColor:As picture shownSize:(L)X(W)45X36cm/17.72inchX14.17inch(appr.)Features1.Made of flax linen material, natural, untreated, unbleached.2. A couche is used to proof the bread.3. Plenty of surface to work multiple loaves.4. Do not bake in oven. It can not withstand the heat.5. Finished seam on both sides so …
99900W 12V Smart Ultrasonic inverter Electro Fisher Fishing Machine Ultrasonic inverter Safe Protection Fisher Fishing Shocker 20 Field Tube
$170.09InvertersAdd to cartSpecificationsColor:BlackDrive:Intelligent drive computer boardSecurity protection:12 intelligent security protectionsScope of application:1-3mApplicable depth:3mThyristor:2 * energy-efficient siliconPower field tube:20Applicable battery:12V 45A or moreProduct net weight:1.8KGSize:290 * 60 * 145mmOverload Protection:Yes (120A)Low Voltage Protection:Yes (Less than 9V/DC protection )High Voltage Protection:Yes (Exceed 15V/DC protection )Over-temperature Protection:85°CFeatures– Short-circuit Protection&Reverse Polarity Protection&Waterproof Protection.– High power& Low energy consumption& Excellent results, the …
CMP03 3A-12V Charge and Discharge Controller Solar Charge Controller Solar Panel
$30.36Solar ControllersAdd to cartSpecificationModel:CMP03Rated Voltage:DC12VMax Current:3Avoltage of solar panels:36W(3A,12v)Charge-stop Voltage:14.4VCoefficient of Stop Voltage and Temp:-3mV/degree/cellSupply-stop Voltage:10.6VSupply-resume Voltage:12VLight Control Mode:Visibility 20MWorking Temp:-10- +40degree;Weight:33gFunction1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.2. Controller will start the lighting system in the evening automatically according to the surrounding luminance.Indicator1. One charging indicator, light indicates …
CMP03 3A-12V Charge and Discharge Controller Solar Charge Controller Solar PanelRead More
8 PCS Diving Equipment SMACO Scuba Diving Cylinder Oxygen Reserve Air Tank
$443.46Electrical Pump & ValveAdd to cartSpecificationBreathing Oxygen Cylinder Capacity:0.5L Material:Aviation Aluminum Oxygen Cylinder Weight:1040g Oxygen Cylinder Dimension:φ6*35.5cm (2.4*14′) Air Capacity:3.0 Cu.Ft / 85 Litters Max. Pressure:3000Psi / 200bar / 20MpaMax. Dwell Time Underwater:10mins Pumping Time:7-10min Features1. The 0.5L Oxygen Cylinder Allows The Diver To Stay 7 Meters Underwater For 6-10 Minutes (Depending On Individual Lung Capacity And Depth Of Diving), …
8 PCS Diving Equipment SMACO Scuba Diving Cylinder Oxygen Reserve Air TankRead More
5pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$30.60Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
5pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.