3pcs 24V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$34.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC24V:240W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
3 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.165 kg |
---|
Customers Also Viewed
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module
$45.91Sensor & Detector ModuleAdd to cartDescriptionSize:32mm X22mm X30mm length * width * heightMain chip:LM393, NH3 gas sensing probeWorking voltage:DC 5VFeatures1. It has a signal output indicator indication;2, dual signal output (analog output and TTL level output);3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the …
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor ModuleRead More
Waveshare BME280 Environmental Sensor Expansion Board Module Temperature/Humidity/Air Pressure
$29.04Sensor & Detector ModuleAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewA tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental …
10pcs Yellow 22MM AC 60-500V Voltmeter Square Panel LED Digital Voltage Meter indicator Light
$31.54Electronic Accessories & SuppliesAdd to cartSpecificationsProduct Name:Digital Panel Light VoltmeterModel Number:AD101-22VMSInput Voltage:AC 60 to 500 Voltage (AC only)Rated CurrentBrightness:◎60cd/Square MetersVibration AC Frequency:2-80Hz AccelerationElectrical durability:◎30,000HHole Cutting Size:22mm/ 0.87” DiameterMaterial:Plastic, Metal, Electric ComponentsColor:YellowPackage included10 x Voltmeter
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control Module
$12.31Sensor & Detector ModuleAdd to cartParameterInput voltage:DC 9V-24VOutput voltage:DC 9V-24VLoad power:30WLoad current:3AStandby current:10mAStandby power consumption:0.1WWorking environment temperature:-20°C-65°CModel:Touch_S (L40W10)Size:40*10*1.2mm (length*width*height)(The test condition:Vin=12V)Mode descriptionTouch_Sensor_S00 (normal switch)S00 mode, quick touch to switch the lighting on / off status, without dimming function, the effect is gradual.Touch_Sensor_S01 (unidirectional dimming)In the S01 mode, the quick touch switches the on / off status of the light; in …
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control ModuleRead More
Excellway 10 Sets Mini Micro JST XH2.54mm 7 Pin Connector Plug Socket Wire Cable 150mm
$20.24ConnectorsAdd to cart10 Sets Mini Micro JST XH2.54 7-Pin Connector Plug With Wires Cables 150mmSpecificationProduct Name:Connector Plug With WiresPart:Connectors/WiringModel:XH 2.54mmFuel Source:ElectricLength:150mmPitch:2.54mmWire Size:24AWG 1007Quantity:10Pairs(10Pcs Single Head Wire + 10Pcs Socket )Package Includes10 Sets XH2.54 7Pin Single End 15cm Wire To Board Connector
Reviews
There are no reviews yet.