3pcs 24V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$34.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC24V:240W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
3 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.165 kg |
---|
Customers Also Viewed
MK1 Acrylic Remote Ver. Tony DIY Arc Reactor Lamp Kit Remote Control Illuminant LED Flash Light Heart Set
$70.86Engraving Parts & AccessoriesAdd to cartThe diaplay box and the bracket inchPROOF THAT TONY STARK HAS A HEARTinch is sold separately, please click that:ID:1429112The following chart shows different versions of our ARC reactor DIY model lamp, you can choose your favorite ones.ARC Reactor DIY Model Lamp Version:Please refer toMK1 Acrylic Frame Version:ID:1420733MK1 Aluminum Alloy Frame Version:ID:1434480MK2 Acrylic Frame Version:ID:1434467MK2 Stainless …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V
$10.17Driver ModuleAdd to cartParametersSize:18.5 x 16 mmInput voltage:3-10VSingle H bridge output current:1.5A, can drive 2 dc deceleration motors.Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.Purpose:drive dc motor and 4-wire stepping motor up to 1.5A.InstructionsULT low level is in sleep mode (need to disconnect J2 short welding spot behind the …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10VRead More
M5Stack ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator Development Board
$177.66Smart ModuleAdd to cartIntroductionFACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328 processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with your M5Core.If you up for some classic video game, PyGamer panel plus M5Core …
10pcs 1S 3.7V 4A li-ion BMS PCM 18650 Battery Protection Board PCB for 18650 lithium Battery Double MOS
$13.12Battery Protection ModuleAdd to cartSpecificationsOvercharge detection voltage:4.25 ± 0.05VOvercharge release voltage:4.23 ± 0.05VOver discharge detection voltage:2.45 ± 0.1VUpper limit continuous current:4AOvercurrent detection current:5ACharging voltage:4.2VProduct Size:35 * 4 * 2.2MMIC components:DW01 + 8205A * 2 The main function:Overcharge protection, over discharge protection, short circuit protection, overcurrent protection.Wiring InstructionsB +:Connected to the battery positive.B-:Connected battery negative.P +:For the battery pack output …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$4.04Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
Solar Charge Controller 15A LCD Display Controller Solar Controller for PWM Solar Power Panel Water Pump
$76.94Solar ControllersAdd to cart15A Controller For PWM Solar Panel Water PumpSpecificationMaterial:Acrylonitrile Butadiene Styrene (ABS)Color:BlackSize:14x9x3cmSystem voltage:12N/24V adaptiveUSB output:5V/2ACharging current:15ACharging voltage:13.7VRelease point cutoff voltage:10.7VWorking temperature:-20~+60°CFeaturesLCD displayPWM battery chargingAll necessary protections equippedAdjustable cotrolling parameter of the systemBuild-in industrial micro controllerBuild-in short-circuit protection, open-circuit protection, reverse protection,Over-load protection.Dual mosfet reverse current protection,low heat production.Application:Solar ControllerPackage include1 x solar controller
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger Modes
$12.31Relay ModuleAdd to cartDescriptionTime can be adjusted by a potentiometer to meet the use of most of your occasions.With Micro USB 5.0V power supply input, it is very convenient to use.5-30V ultra wide power supply voltage.Two trigger modes:external trigger and onboard buttons trigger.It has a relay suction indicator.Strong anti-interference ability, all kinds of interference under the relay will …
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger ModesRead More
Reviews
There are no reviews yet.