3pcs 24V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$34.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC24V:240W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
3 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.165 kg |
---|
Customers Also Viewed
20pcs DC-DC Buck Regulator Module 9V/12V/24V to 5V USB Charging Vehicle Power Supply Buck Module
$41.78Power Supply ModuleAdd to cartDescriptionProduct size:35.5*17*8.3mmInput voltage range:6-26VThe output voltage is 5.2V (considering the loss of charging line, the output terminal is about 5.2V, and the load terminal is about 5V).The maximum output current is 3A (without the heat sink, the output current is 2A).Note 1:Positive and negative can not be reversed, and the input voltage should not exceed …
3pcs AT Firmware DT-W5G1 5G WiFi Module 2.4g/5g Dual-band Module with Antenna interface for Wireless Image Transmission
$39.69Smart ModuleAdd to cartDescriptionSOC characteristicsBuilt-in 160MHz MIPS RISC processor512K SRAMCommunication rate:72Mbps (20MHz)Optimal balance & LLR quantificationWi-Fi featuresSupport 802.11 a/b/g/n, 2.4-2.5GHz, 4.9-5.85GHz2.4GHz Rx sensitivity:-75dBm/11n HT20 MCS7, Tx Power:21dBm5GHz Rx sensitivity:-74dBm/11n HT20 MCS7, Tx Power:16.5dBmSupport Station, SoftAP modeSupport Wi-Fi Direct (P2P)Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRCP2P discovery, P2P GO mode/GC mode and P2P …
Geekcreit LCR-T3 LCR-T4 Mega328 Transistor Tester Diode Triode Capacitance ESR Meter Assembled
$34.98Power Supply ModuleAdd to cartSpecificationsResistor:0.1ω-50MωCapacitor:25pF-100000uFInductance:0.01mH – 20HWorking power:DC-9VStandby current:0.02uAOperating current:25mAMaterial:Metal+PlasticSize:about 11.1cm/4.37inchx2.6cm / 1.02inchx8.5cm/3.34inch[Conversion:1cm=0.3937 inch, 1inch=2.54 cm]Description1. Add boot voltage detection function2. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components3. Automatic test out the pin element and displayed on the LCD4. Can be detected …
1Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included1 Pair x 13MM Waterproof Aviation Connector
5Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$30.28Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included5 Pair x 13MM Waterproof Aviation Connector
230W 7R DJ Disco Stage Head Light Lamp Moving Beam Ballast Power Supply Module
$45.91Power Supply ModuleAdd to cartTechnical SpecificationsMini size, compact design.sturdy and durable.Easy to use and convenient to operate.Application:Commercial, Engineering, Indoor, Outdoor, Professional, SailingFeatures and BenefitsMaterial:PCBVoltage:110-220VWattage:230WType:7R BallastLength:13cm/5inchPackage Includes1 x Power Supply ModuleNotice1. Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.2. The color may have different as the difference display,pls understand.
Emakefun DC5V Gesture Sensor Module with 4PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$15.17Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:4PIN anti-reverse connection Dupont line 12C3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x Gesture Sensor Module(the other items are not includes)
5pcs 5V 0.6A 3W Qi Standard Wireless Charging DIY Coil Receiver Module Circuit Board Wireless Charging Coil for Smart Phone
$40.93Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsOutput:5V 0.6APower:3WCircuit board size:20 x 20 x 1 mmMagnetic shield size:28 x 28 x 0.1 mmCoil size:24 x 8 x 0.5 mmCoil outer diameter:24mmCoil inner diameter:8 mmApplication:Can be used for wireless charging …
Reviews
There are no reviews yet.