5pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$51.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
5 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.27 kg |
---|
Customers Also Viewed
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
$13.49Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openOverviewSensitive material MQ-7 gas sensors used in clean air, low conductivity tin oxide (SnO2). High-low temperature cycling detection mode (1.5V heating) carbon monoxide detector, conductivity sensor with the increasing concentration of carbon monoxide gas in the air increases,high-temperature (5.0V heating) cleaning cryoadsorption stray gases. Using a simple circuit to change the conductivity, …
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection ModuleRead More
Mini DC12V 3M Micro Quiet Motor Submersible Brushless Water Pump
$24.29Electrical Pump & ValveAdd to cartDescriptionMini DC 12V 3M 240L/H Micro Quiet Brushless Motor Submersible Water PumpFeatureBrushless, permanent magnetic rotor, maintenance-free.Stator and circuit board sealed by epoxy resin.The axis is enclosed with static sealing, which can avoid leaking problemsAdopt high performance stainless steel shaft.Amphibious design, able to work either on land or in water.Super long working life (more than 30,000 …
Mini DC12V 3M Micro Quiet Motor Submersible Brushless Water PumpRead More
100-240V Power Adapter Power Supply Adaptor Plugs AU Standard
$16.19AC/DC AdaptersAdd to cartPower Supply Adaptor for Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105SpecificationsInput:AC 100-240V, 50/60HzOutput:DC 12V 1AColor:BlackSize(Approximately):7.8*4.9*3.2cm(approx.)Wire length(Approximately):93cmPlug type:AU PlugFeatures-Voltage Protection-Short Circuit Protection-Current Protection-Sealed for protection against moisture and humidityApplicationFor Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105Package included1 x Adaptor
3pcs BT201 Dual Mode 5.0 Bluetooth Lossless Audio Power Amplifier Board Module TF Card U Disk Ble Spp Serial Port Transparent
$16.31Amplifier BoardAdd to cart>>>Manual:Click here to openOverviewBT201 5.0 Bluetooth module is a 4-in-1 single chip that supports bluetooth, usb flash drive and TF card. The highlight of the chip is that it supports lossless music playback, simple and clear serial port control function, BLE pass-through function and SPP pass-through function.It greatly reduces the development difficulty of embedded bluetooth …
100pcs 30pF 5.08MM 50V Multilayer Monolithic Ceramic Capacitor
$5.09Electronic Accessories & SuppliesAdd to cartDescriptionFrequency characteristics:low frequencyAdjustment method:fixedLead Type:Radial Lead WireTolerance:÷ 10 (%)Pressure resistance:50 (V)Capacity:30pFFeaturesLarge capacity, small size, high reliability,Stable capacity, high temperature and humidity resistance.Applications:Widely used in electronic precision instruments.A variety of small electronic equipment for resonance, wave filtering Package included100 x 30pF capacitor
220V 750W Stainless Steel Deep Well Submersible Screw Pump Water Pump
$546.74Electrical Pump & ValveAdd to cartSpecificationsName:Submersible PumpColor:grayMaterials:stainless steelPower:750WVoltage:220VSize:540*100mmCord Length:18mPump Head/Lift:75m MaxFeatures-Energy-efficient, easy to install, low energy, low noise.-Stainless steel body, strong and durable, not easy to rust.-Stainless steel filter prevents impurities from entering the pump and has a long service life.Package Included1 x Submersible Pump3 x Accessories(distribute the adapter according to your country)
20Pcs Mini DC-DC1.3A Voltage Converter Step Down Module 12V 24V to 5V 3.3V 9V with integrated inductor for 360 RC
$31.43Power Supply ModuleAdd to cartFeaturesThe maximum output current is 1.3A, and it is running within 1A for a long time;Non-isolated DC synchronous rectification with up to 94% conversion efficiencyOne-piece inductor, lower heat than ordinary shielded inductorUniversal, optional output voltage, spot welding directly on the boardOutput with LED indicator for easy and visual indication of voltage outputWith enable (EN) port, …
65x37mm Universal Slotted Frame Rail Floor Jack Guard Adapter Lift Rubber Pad Rubber Mat
$22.67RubbersAdd to cartDescriptionThis rubber pad is suitable for car Jack with 55mm intake.SpecificationType:Rubber Pad Universal Diameter 65×37 With Wide V-GrooveMaterial:RubberColor:BlackDiameter:65mmTotal height:37 mmGroove Top:15mmGroove Bottom:10mmGroove Height:8mmFeatures1. Universally applicable.2. Industrial Quality.3. Very robust (min. 80 Shore).4. Easy install and durable use.5. Great quality and great Fitment.6. Direct Replacement, No Modifications Necessary.FitmentSuitable For Car Jack With 55mm IntakePackage Included1 x …
65x37mm Universal Slotted Frame Rail Floor Jack Guard Adapter Lift Rubber Pad Rubber MatRead More
Reviews
There are no reviews yet.