5pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$51.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
5 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.27 kg |
---|
Customers Also Viewed
18v 15w 410mm*200mm*3mm Semi-flexible Solar Panel with Cable for off-road Vehicle Outdoor Working
$62.25Smart Robot & Solar PanelAdd to cartFeatures– Durable with PET backsheet, no glass.– Unique frameless design includes 4metal reinforced mounting holes for easy installation– Light weight,easy carrying,easy shipment,easy installation.– Thin:the thickness is only 3mm, easy joint to your yacht or RV roof , boat etc.– Solar energy conversion rate up to 19.6-20%– Rounding corners to prevent from being scratched.Hardening process surface …
RX HF 1-50MHz Durable Portable Antenna Splitter Radio Communication BNC Connectors Home Professional Metal
$29.96Other Module BoardAdd to cartFeaturesHF Antenna RX splitter has one antenna port and two receivers ports.Frequency range:100kHz-50 Mhz. Impedance (I/O)-50 Ohm.SpecificationsMaterial:Metal, PlasticColor:As ShownTypes:Finished ProductFrequency range:100kHz-50 MhzImpedance (I/O)-50 OhmAverage port to port isolation measured-36 dBAverage signal attenuation(loss)-3.2 dBConnectors type-BNCSize:(Approx) 150*150*50mmPackage Included1 x Antenna Splitter RX HF 1-50 MHz
3Pcs DIY LED Lamp Kit LED Flash Set Electronic Production Kit
$30.16DIY Electronic KitsAdd to cartFeatureKit Model:LSD-73Dimensions:100 * 80mmWorking voltage:DC4-5VPackage weight:55 gramsNote:This is a DIY kit, you need to assemble it, to get the installation document.Package includes3 x DIY LED Lamp KitSoldered PCB, for reference only!
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/Min
$200.46Electrical Pump & ValveAdd to cart12V Portable Fuel Diesel Pump Oil Transfer Pump Self Priming 50L/Min 300WSpecificationsMaterial:Pure copper motor + cast ironQuantity:1 setLift distance:15mAbsorbing distance:5mRotate Speed:5000R/minFlow Rate:50L/minVoltage:12VPower:300WProduct dimension:20cm x 14cm x 10cm (Approx.)Package size:30 x 16 x 17cm(Approx.)Used for pumping, oil, kerosene and diesel oil.Not suitable for petrol.Features-Self priming.-Low working noise.-Powerful 12Volt 300W motor.-With handle so it is easy to …
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/MinRead More
5Pcs Geekcreit 36 Value Electronic Components Storage Assortment Box
$84.81Electronic Accessories & SuppliesAdd to cartDescriptionFormat size of this electronic components assortment box can be assembled arbitrary, varies of intervals designed to facilitate access to small parts and store, pick parts very easy.Specification36 value:27.0 x 17.5 x 4.5cmPackage included5 x Electronic components assortment box
5Pcs GPIO Pin Reference Board for Raspberry Pi 2 Model B & Raspberry Pi B+
$17.24Raspberry Pi & Orange PiAdd to cart5Pcs GPIO Pin Reference Board For Raspberry Pi 2 Model B & Raspberry Pi B+FeatureCompatible with Raspberry Pi 2 Model B & Raspberry Pi B+Material:PCBWith marked you can easily distinguish all leads of GPIODimensions:5.3 cm x 1 cm x 0.1 cmPackage included5 x GPIO Pin Reference Board
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality Tester
$56.85Sensor & Detector ModuleAdd to cartFeatureParameter:Index:UnitParticulate matter measurement range:0.3 ~ 1.0; 1.0 ~ 2.5; 2.5 ~ 10:Micrometer (um)Particle counting efficiency:50% @ 0,3 microns 98% @> = 0.5 micronsEffective range of particulate matter concentration (PM2.5 standard value):0-500:Μg / m3Particulate matter concentration resolution:1:Μg / m3Particulate matter concentration consistency (PM2.5 standard value) *:± 10% @ 100 ~ 500μg / m3± 10 μg / …
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality TesterRead More
Reviews
There are no reviews yet.