5pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$51.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
5 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.27 kg |
---|
Customers Also Viewed
1000W 220V Electric Non-Stick Cake Pan Pie Maker Iron Machine Baking Snack Maker for Kids
$74.91Solar CollectorsAdd to cartElectric Non-Stick Cake Machine Baking Snack Maker For Kids 1000w 220vSpecificationsMaterial:Aluminium, PlasticColor:YellowVoltage:220vPower:1000wSize:24*20*9.5cmFeatures– The temperature can’t be set, it’s automatic temperature control design.– It’s easy and very convenient to use, just a few minutes.– The lid is active in order to make the cake more fluffy.Package included1 X Cake Machine
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply Module
$99.90Boost & Buck ModuleAdd to cartDescriptionMini PFM ControlOn-board input voltage indicatorHigh conversion efficiency, maximum to 96%Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MAOn-board USB female, can supply power directly to the USB interfaceSmall dimensionSpecificationInput …
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply ModuleRead More
TPA3116 Subwoofer Amplifier Board 2.1 Channel High Power bluetooth 4.2 Audio Amplifiers DC12V-24V 2*50W+100W Amplificador with Shell
$54.90Amplifier BoardAdd to cartProduct description1. This is a DC-powered 12-24V power supply, using TI’s TPA3116D2 high-performance digital power amplifier chip as the core, one to do parallel bridged bass channel power amplification output, one to do left and right channel power amplification output. support 100W (bass channel) + 50W (left channel) + 50W (right channel) three-channel output.2. Support …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser Printer
$1,239.29Laser Engraving MachineAdd to cartNotice1. Now we all supply the new version of EleksMaker A3-5500 as the pictures shown. (New version means the improved appearance of machine, while you can know what the old version looks like via the first video above.)2. The frame joint is upgraded and will be easier to assemble. (Remove corner joints and add rubber …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser PrinterRead More
10pcs DC 3V-5V 20mA Rain Water Level Sensor Module Detection Liquid Surface Depth Height for Geekcreit for Arduino – products that work with official Arduino boards
$7.60Power Supply ModuleAdd to cartDescriptionWater Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read development board of FOR …
3pcs JUWEI 5V 10W 2 Switch USB Aging Discharge Loader 3 Kinds Current Test Load Power Resistor
$13.41Other Module BoardAdd to cartDescriptionRated power:10WVoltage:5VA designed according to the principle of ohm’s law and through the resistor in parallel through a different switch, can produce 3 kinds of resistance of a new USB electronic load resistance discharge, when all the switch opens, is 2.2 ohm/10W, 4.7 ohm/10W, 2 kinds of resistance in parallel at the same time, in …
Reviews
There are no reviews yet.