3pcs 24V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$42.69
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:DC24V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
3 x High precision microcomputer temperature controller
Weight | 0.285 kg |
---|
Customers Also Viewed
M5Stack Ultra-Wideband UWB UnM5Stack Ultra-Wideband UWB Unit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Rangeit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Range
$87.06Test & Measuring ModuleAdd to cartDescriptionUWB is a Unit which integrates the UWB(Ultra Wide Band) communication protocol which uses nanosecond pulses to locate objects and define position and orientation. The design uses the Ai-ThinkerBU01 Transceiver module which is based on Decawave’s DW1000 design. The internal STM32 chip with its integrated ranging algorithm,is capable of 10cm positioning accuracy and also supports …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer Device
$36.44Solar CollectorsAdd to cartLED Ultrasonic Dog Repeller Handheld Dog Trainer Device 3 in 1 Anti-barking Stop Bark Dog Deterrent Training ToolsFeaturesUltrasonic design-Adopts ultrasonic technology, make the dogs be quite and can effectively train your dogs to be obedient and stop some unwanted behaviors, protect you from being attacked by unfriend dogs. Multi-function deviceThe dog repeller have 3 functions, …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer DeviceRead More
3pcs DC 3.7-7.4V 4A 800-1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module
$32.59Electronic Accessories & SuppliesAdd to cartDescriptionInput parameters:3.7-7.4V/4A input, cable length:about 10 cm (red + green -)Output parameter:800-1000KV / 0.5A, cabl length:about 16 cmHigh voltage polarization discharge distance:1.5-2cm (don’t exceed)Size:3.4 x 2.3 x 1.7cmAbout input power:can use 3.7V lithium battery input (such as 18650 battery), 4V or 6V lead acid battery and so on. The input voltage current affects the output …
Semiconductor Chilling Plate Cooling fan Kit TEC1-12706 thermoelectric Peltier Cooler Refrigeration Cooling System
$37.17Module KitsAdd to cartDescriptionAdopt TEC1-12706 semiconductor chilling plate, good quality for use.Complete sealed structure, isolating the moisture in the air.Higher reliability than others.Include TEC1-12706 semiconductor cooler and other accessories, easy to install.Great DIY kit for electronic enthusiasts in semiconductor cooling applications.FeatureSemiconductor Chilling Plate:TEC1-12706Size:40 * 40 * 3.75mmInternal Resistance:2.1~2.4Max. Temperature Difference:67C AboveRated Voltage:12V(Vmax. 15V, Starting Current 5.8A)Working Current:Imax.=4~4.6A(Rated 12V)Refrigeration …
Universal 40-Pin ZIF DIP IC Test Board Socket ZIF IC Socket for DIP IC MCU
$16.19SwitchesAdd to cartFeatureThis is a universal ZIF IC test socket.Great pin contact with a leverIt’s suitable for IC with 40 pinsEasy to remove and to program ICsSpecificationColor:greenMounting Type:Through holePitch:Approx. 0.1inchinch inches (2.54mm)Pin Number:40Type:DIP, ZIFSize(L x W x H):Approx. 65mm x 2.2mm x 1.1mm(L x W x H not include the pins and lever)Package Included1 x IC socket
AUDEW Premium Tire Pressure Gauge 0-100 PSI Heavy Duty & Accurate Air Pressure Tire Gauge for Car SUV Truck Motorcycle Bicycle
$28.34Switch AccessoriesAdd to cartSPECIFICATION-Applicable type:car, truck, motorcycle, bike, etc-Operating Temp:- 20 ℃ ~ + 40 ℃-Range:0-100 psi-Unit of measurement:PSI, BAR-Resolution:0.05 kg/cm-Accuracy:+/-1%+0.5psi(relative humidity Temperature 25 ℃)FEATURES1.More than a tire pressure gauge, also can deflate overinflated tires with a built-in air bleeder valve.2.High accuracy and easy to read with 2 units of measurement.3.Made with premium heavy duty matel materials, sturdy …
Reviews
There are no reviews yet.