5pcs 220V XH-W2060 Embedded Digital thermostat Cabinet Freezer Cold Storage thermostat Temperature Controller Temperature Control
$86.31
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Digital display embedded cabinet thermostat
Product model:XH-W2060
Temperature range:-19~99 °C
Control range:-19~99 °C
Temperature control accuracy:1 °C
Measurement input:NTC10K waterproof probe L = 1 m
Refresh rate:4 times / sec
Use environment:-30~60°C Humidity 20%-85%
Use environment:12/24/220V optional
Output type:Relay output up to 10A
Appearance size:77 x 62 x 34.5mm
Opening size:71 x 29mm
Other functions:Power-off memory, state memory, temperature correction, delay start
Code:Code Description:Setting Range:Factory settings:Unit
P0:Operating mode:C/H:C:/
P1:Hysteresis setting:0.1-50:2:°C
P2:Temperature correction:-9~9:0:°C
P3:Delayed start:0-9:0:Minute
P4:High temperature alarm:-19~99:99:°C
P0:Temperature control mode
C:Cooling mode H:Heating mode
P1:Difference setting
For example:P1=5
Cooling mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.
Heating mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again.
P2:Temperature correction
If the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26
P3:Delayed start
This function is used for compressor cooling. If it is used in a refrigerator freezer, this value must be set. According to the compressor back pressure, the value is usually set to 3-6 minutes.
P4:High temperature alarm
Set the high temperature alarm value. When the detected temperature exceeds this value, the screen flashes and the buzzer sounds an alarm.
Package includes
5 x Digital display embedded cabinet thermostat
Weight | 0.875 kg |
---|
Customers Also Viewed
10pcs Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp Wardrobe LED Lights
$32.97Sensor & Detector ModuleAdd to cartSpecificationsTotal power _ ≤ 72WInput voltage:5-24V (DC)Output voltage = input voltageOutput form:switch + indicatorSensing distance:30-80MMDelay time:no sweeping on/offInduction principle:infrared distanceScope of application:DC constant voltageLoad current resistance:3AStandby current:10-15mASize:142 x 12 x 7.9MPackage Included10 x Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping Wrapping
$60.74ConnectorsAdd to cartDescriptionThe WSU 30M wire tool can be wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripper blade.SpecificationType:WSU-30MWire Gauge:30 AWG (0.25 mm)Maximum Insulation Diameter:0.021inch (0.53 mm)Terminal Hole Dia:0.036inch (0.91 mm)Terminal Hole Depth:1.50inch (38.1 mm)Outside Diameter:0.125inch (3.2mm)Wrap Post Size:0.025 Inch (0.63 mm)Weight:0.076 lbs (34.47g)Functions:Wrap, Unwrap, StripFeatures-Widely used for bench, tool kit and …
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping WrappingRead More
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with Remote
$21.86Smart ModuleAdd to cartSpecificationsInput Voltage:DC10-14VStandby CurrentRF Frequency:433MHZRF Working mode:Super heterodyne receiverReceiver Sensitivity:>98dBmRemote Control Distance:>100 meter(In open environment)Decoding Way:MCU Software decodingCan store the number of remote control:50Support remote control type:Fixed code, learning codeChannel:4CHMultiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)Wiring Method:Fixed wiring terminalWorking Voltage:DC12VOutput Current:10AOutput:Normally open,Common,Normally closedSize:50x70x25mmHow to use1. Jog/Non-Latched:Press one button is Working /ON. Loosen your finger on the …
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with RemoteRead More
730 Holes Transparent Breadboard Protoboard DIY Kit Universal PCB Circuit Board Solderless
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionSuitable for line prototypingABS plastic panel, tinned phosphor bronze contact pieceCan be used with 20-29AWG wireVoltage / current:300V / 3-5APackage included1 x 730 Holes Transparent Breadboard
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse Sensor
$41.31Sensor & Detector ModuleAdd to cartDescriptionThe pulse sensor is a sensor used to test the heart rate. Students, artists, athletes, creators, games or mobile terminal developers can develop interactive works related to heart rate. The sensor can be worn on a finger or earlobe and connected to the Ard via a wire. It also has an open source app that …
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse SensorRead More
Geekcreit UNO R3 ATmega328P Development Board for with Housing for
$13.20Motherboard & Development BoardAdd to cartNote No USB cable version This version can not compatible with OS system Features Open the original schematic design, free development software interface download, also allow your needs to be modified, easy and convenient to download the program. Can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and …
Geekcreit UNO R3 ATmega328P Development Board for with Housing forRead More
3pcs SMA-F Receiver Mini 1:9 Antenna HF Balun G10-003 for 160m-6m Amateur Frequency Bands SGA998
$25.03Smart ModuleAdd to cartDescriptionsConnector:SMA femaleTotal size:about 39.2mmx13.0mm (including connector)Weight:about 5gMaximum input power:+28dBmFeaturesIt is mainly designed for 160m-6m amateur bands;Fully assembled, and easy to use.Excellent specifications & low insertion loss.Package Included3 x SMA-F Receiver Mini 1:9 Antenna
Reviews
There are no reviews yet.